Re: [PATCH 8/9] MIPS: xilfpga: Add DT node for AXI emaclite
From: Jason Cooper <hidden>
Date: 2016-08-15 15:17:16
Also in:
linux-mips, lkml
Hi Zubair, On Mon, Aug 15, 2016 at 02:55:34PM +0100, Zubair Lutfullah Kakakhel wrote:
quoted hunk ↗ jump to hunk
The xilfpga platform has a Xilinx AXI emaclite block. Add the DT node to use it. Signed-off-by: Zubair Lutfullah Kakakhel <redacted> --- arch/mips/boot/dts/xilfpga/nexys4ddr.dts | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+)diff --git a/arch/mips/boot/dts/xilfpga/nexys4ddr.dts b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts index 3658e21..58bc62f 100644 --- a/arch/mips/boot/dts/xilfpga/nexys4ddr.dts +++ b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts@@ -42,6 +42,33 @@ xlnx,tri-default = <0xffffffff>; } ; + axi_ethernetlite: ethernet@10e00000 { + compatible = "xlnx,xps-ethernetlite-3.00.a";
This one also isn't documented.
+ device_type = "network"; + interrupt-parent = <&axi_intc>; + interrupts = <1>; + local-mac-address = [08 86 4C 0D F7 09];
I'm pretty sure you don't want this in the mainline dts file. thx, Jason.
+ phy-handle = <&phy0>;
+ reg = <0x10e00000 0x10000>;
+ xlnx,duplex = <0x1>;
+ xlnx,include-global-buffers = <0x1>;
+ xlnx,include-internal-loopback = <0x0>;
+ xlnx,include-mdio = <0x1>;
+ xlnx,instance = "axi_ethernetlite_inst";
+ xlnx,rx-ping-pong = <0x1>;
+ xlnx,s-axi-id-width = <0x1>;
+ xlnx,tx-ping-pong = <0x1>;
+ xlnx,use-internal = <0x0>;
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: phy@1 {
+ device_type = "ethernet-phy";
+ reg = <1>;
+ };
+ };
+ };
+
axi_uart16550: serial@10400000 {
compatible = "ns16550a";
reg = <0x10400000 0x10000>;
--
1.9.1