[patch net 0/9] mlxsw: couple of fixes · Jiri Pirko <jiri@resnulli.us> · 2016-08-15
[patch net 2/9] mlxsw: spectrum: Remove redundant errors from the code · Jiri Pirko <jiri@resnulli.us> · 2016-08-15
[patch net 1/9] mlxsw: spectrum: Don't return upon error in removal path · Jiri Pirko <jiri@resnulli.us> · 2016-08-15
[patch net 5/9] mlxsw: spectrum: Add missing packet traps · Jiri Pirko <jiri@resnulli.us> · 2016-08-15
RE: [patch net 5/9] mlxsw: spectrum: Add missing packet traps · Ilan Tayari <hidden> · 2016-08-15
Re: [patch net 5/9] mlxsw: spectrum: Add missing packet traps · Ido Schimmel <hidden> · 2016-08-15
[patch net 7/9] mlxsw: spectrum: Unmap 802.1Q FID before destroying it · Jiri Pirko <jiri@resnulli.us> · 2016-08-15
[patch net 6/9] mlxsw: spectrum: Add missing rollbacks in error path · Jiri Pirko <jiri@resnulli.us> · 2016-08-15
[patch net 3/9] mlxsw: spectrum: Create PVID vPort before registering netdevice · Jiri Pirko <jiri@resnulli.us> · 2016-08-15
[patch net 8/9] mlxsw: spectrum: Allow packets to be trapped from any PG · Jiri Pirko <jiri@resnulli.us> · 2016-08-15
[patch net 4/9] mlxsw: spectrum: Mark port as active before registering it · Jiri Pirko <jiri@resnulli.us> · 2016-08-15
[patch net 9/9] mlxsw: reg: Fix missing op field fill-up · Jiri Pirko <jiri@resnulli.us> · 2016-08-15

RE: [patch net 5/9] mlxsw: spectrum: Add missing packet traps

From: Ilan Tayari <hidden>
Date: 2016-08-15 19:24:51

Add the following traps:

1) MTU Error: Trap packets whose size is bigger than the egress RIF's MTU. If DF
bit isn't set, traffic will continue to be routed in slow path.

2) TTL Error: Trap packets whose TTL expired. This allows traceroute to work
properly.

3) OSPF packets.

Don't you need LBERROR as well?

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help