[patch net 0/9] mlxsw: couple of fixes

STALE3705d

12 messages, 3 authors, 2016-08-15 · open the first message on its own page

[patch net 0/9] mlxsw: couple of fixes

From: Jiri Pirko <jiri@resnulli.us>
Date: 2016-08-15 14:37:56

From: Jiri Pirko <redacted>

Elad Raz (1):
  mlxsw: spectrum: Add missing packet traps

Ido Schimmel (7):
  mlxsw: spectrum: Don't return upon error in removal path
  mlxsw: spectrum: Remove redundant errors from the code
  mlxsw: spectrum: Create PVID vPort before registering netdevice
  mlxsw: spectrum: Mark port as active before registering it
  mlxsw: spectrum: Add missing rollbacks in error path
  mlxsw: spectrum: Unmap 802.1Q FID before destroying it
  mlxsw: spectrum: Allow packets to be trapped from any PG

Jiri Pirko (1):
  mlxsw: reg: Fix missing op field fill-up

 drivers/net/ethernet/mellanox/mlxsw/reg.h          |   1 +
 drivers/net/ethernet/mellanox/mlxsw/spectrum.c     | 105 +++++++++++----------
 drivers/net/ethernet/mellanox/mlxsw/spectrum.h     |   2 -
 .../net/ethernet/mellanox/mlxsw/spectrum_buffers.c |   2 +-
 .../ethernet/mellanox/mlxsw/spectrum_switchdev.c   |  42 ++-------
 drivers/net/ethernet/mellanox/mlxsw/trap.h         |   3 +
 6 files changed, 67 insertions(+), 88 deletions(-)

-- 
2.5.5

[patch net 2/9] mlxsw: spectrum: Remove redundant errors from the code

From: Jiri Pirko <jiri@resnulli.us>
Date: 2016-08-15 14:37:58

From: Ido Schimmel <redacted>

Currently, when device configuration fails we emit errors to the kernel
log despite the fact we already get these from the EMAD transaction
layer, so remove them.

In addition to being unnecessary, removing these error messages will
allow us to reuse mlxsw_sp_port_add_vid() to create the PVID vPort
before registering the netdevice.

Fixes: 99724c18fc66 ("mlxsw: spectrum: Introduce support for router interfaces")
Signed-off-by: Ido Schimmel <redacted>
Signed-off-by: Jiri Pirko <redacted>
---
 drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 21 +++++----------------
 1 file changed, 5 insertions(+), 16 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index 76b53ed..a9281afc 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c

@@ -956,16 +956,12 @@ int mlxsw_sp_port_add_vid(struct net_device *dev, __be16 __always_unused proto,
 	if (!vid)
 		return 0;
 
-	if (mlxsw_sp_port_vport_find(mlxsw_sp_port, vid)) {
-		netdev_warn(dev, "VID=%d already configured\n", vid);
+	if (mlxsw_sp_port_vport_find(mlxsw_sp_port, vid))
 		return 0;
-	}
 
 	mlxsw_sp_vport = mlxsw_sp_port_vport_create(mlxsw_sp_port, vid);
-	if (!mlxsw_sp_vport) {
-		netdev_err(dev, "Failed to create vPort for VID=%d\n", vid);
+	if (!mlxsw_sp_vport)
 		return -ENOMEM;
-	}
 
 	/* When adding the first VLAN interface on a bridged port we need to
 	 * transition all the active 802.1Q bridge VLANs to use explicit

@@ -973,24 +969,17 @@ int mlxsw_sp_port_add_vid(struct net_device *dev, __be16 __always_unused proto,
 	 */
 	if (list_is_singular(&mlxsw_sp_port->vports_list)) {
 		err = mlxsw_sp_port_vp_mode_trans(mlxsw_sp_port);
-		if (err) {
-			netdev_err(dev, "Failed to set to Virtual mode\n");
+		if (err)
 			goto err_port_vp_mode_trans;
-		}
 	}
 
 	err = mlxsw_sp_port_vid_learning_set(mlxsw_sp_vport, vid, false);
-	if (err) {
-		netdev_err(dev, "Failed to disable learning for VID=%d\n", vid);
+	if (err)
 		goto err_port_vid_learning_set;
-	}
 
 	err = mlxsw_sp_port_vlan_set(mlxsw_sp_vport, vid, vid, true, untagged);
-	if (err) {
-		netdev_err(dev, "Failed to set VLAN membership for VID=%d\n",
-			   vid);
+	if (err)
 		goto err_port_add_vid;
-	}
 
 	return 0;

-- 
2.5.5

[patch net 1/9] mlxsw: spectrum: Don't return upon error in removal path

From: Jiri Pirko <jiri@resnulli.us>
Date: 2016-08-15 14:37:58

From: Ido Schimmel <redacted>

When removing a VLAN filter from the device we shouldn't return upon the
first error we encounter, as otherwise we'll have resources that will
never be freed nor used.

Instead, we should keep trying to free as much resources as possible in
a best effort mode.

Remove the error message as well, since we already get these from the
EMAD transaction code.

Fixes: 99724c18fc66 ("mlxsw: spectrum: Introduce support for router interfaces")
Signed-off-by: Ido Schimmel <redacted>
Signed-off-by: Jiri Pirko <redacted>
---
 drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 27 +++++---------------------
 1 file changed, 5 insertions(+), 22 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index e1b8f62..76b53ed 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c

@@ -1010,7 +1010,6 @@ static int mlxsw_sp_port_kill_vid(struct net_device *dev,
 	struct mlxsw_sp_port *mlxsw_sp_port = netdev_priv(dev);
 	struct mlxsw_sp_port *mlxsw_sp_vport;
 	struct mlxsw_sp_fid *f;
-	int err;
 
 	/* VLAN 0 is removed from HW filter when device goes down, but
 	 * it is reserved in our case, so simply return.

@@ -1019,23 +1018,12 @@ static int mlxsw_sp_port_kill_vid(struct net_device *dev,
 		return 0;
 
 	mlxsw_sp_vport = mlxsw_sp_port_vport_find(mlxsw_sp_port, vid);
-	if (!mlxsw_sp_vport) {
-		netdev_warn(dev, "VID=%d does not exist\n", vid);
+	if (WARN_ON(!mlxsw_sp_vport))
 		return 0;
-	}
 
-	err = mlxsw_sp_port_vlan_set(mlxsw_sp_vport, vid, vid, false, false);
-	if (err) {
-		netdev_err(dev, "Failed to set VLAN membership for VID=%d\n",
-			   vid);
-		return err;
-	}
+	mlxsw_sp_port_vlan_set(mlxsw_sp_vport, vid, vid, false, false);
 
-	err = mlxsw_sp_port_vid_learning_set(mlxsw_sp_vport, vid, true);
-	if (err) {
-		netdev_err(dev, "Failed to enable learning for VID=%d\n", vid);
-		return err;
-	}
+	mlxsw_sp_port_vid_learning_set(mlxsw_sp_vport, vid, true);
 
 	/* Drop FID reference. If this was the last reference the
 	 * resources will be freed.

@@ -1048,13 +1036,8 @@ static int mlxsw_sp_port_kill_vid(struct net_device *dev,
 	 * transition all active 802.1Q bridge VLANs to use VID to FID
 	 * mappings and set port's mode to VLAN mode.
 	 */
-	if (list_is_singular(&mlxsw_sp_port->vports_list)) {
-		err = mlxsw_sp_port_vlan_mode_trans(mlxsw_sp_port);
-		if (err) {
-			netdev_err(dev, "Failed to set to VLAN mode\n");
-			return err;
-		}
-	}
+	if (list_is_singular(&mlxsw_sp_port->vports_list))
+		mlxsw_sp_port_vlan_mode_trans(mlxsw_sp_port);
 
 	mlxsw_sp_port_vport_destroy(mlxsw_sp_vport);

-- 
2.5.5

[patch net 5/9] mlxsw: spectrum: Add missing packet traps

From: Jiri Pirko <jiri@resnulli.us>
Date: 2016-08-15 14:38:03

From: Elad Raz <redacted>

Add the following traps:

1) MTU Error: Trap packets whose size is bigger than the egress RIF's
MTU. If DF bit isn't set, traffic will continue to be routed in slow
path.

2) TTL Error: Trap packets whose TTL expired. This allows traceroute to
work properly.

3) OSPF packets.

Fixes: 7b27ce7bb9cd ("mlxsw: spectrum: Add traps needed for router implementation")
Signed-off-by: Elad Raz <redacted>
Signed-off-by: Ido Schimmel <redacted>
Signed-off-by: Jiri Pirko <redacted>
---
 drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 15 +++++++++++++++
 drivers/net/ethernet/mellanox/mlxsw/trap.h     |  3 +++
 2 files changed, 18 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index 12681db..6b69c8a 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c

@@ -2651,6 +2651,21 @@ static const struct mlxsw_rx_listener mlxsw_sp_rx_listener[] = {
 	{
 		.func = mlxsw_sp_rx_listener_func,
 		.local_port = MLXSW_PORT_DONT_CARE,
+		.trap_id = MLXSW_TRAP_ID_MTUERROR,
+	},
+	{
+		.func = mlxsw_sp_rx_listener_func,
+		.local_port = MLXSW_PORT_DONT_CARE,
+		.trap_id = MLXSW_TRAP_ID_TTLERROR,
+	},
+	{
+		.func = mlxsw_sp_rx_listener_func,
+		.local_port = MLXSW_PORT_DONT_CARE,
+		.trap_id = MLXSW_TRAP_ID_OSPF,
+	},
+	{
+		.func = mlxsw_sp_rx_listener_func,
+		.local_port = MLXSW_PORT_DONT_CARE,
 		.trap_id = MLXSW_TRAP_ID_IP2ME,
 	},
 	{

diff --git a/drivers/net/ethernet/mellanox/mlxsw/trap.h b/drivers/net/ethernet/mellanox/mlxsw/trap.h
index 470d769..9508e0a 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/trap.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/trap.h

@@ -56,6 +56,9 @@ enum {
 	MLXSW_TRAP_ID_IGMP_V3_REPORT = 0x34,
 	MLXSW_TRAP_ID_ARPBC = 0x50,
 	MLXSW_TRAP_ID_ARPUC = 0x51,
+	MLXSW_TRAP_ID_MTUERROR = 0x52,
+	MLXSW_TRAP_ID_TTLERROR = 0x53,
+	MLXSW_TRAP_ID_OSPF = 0x55,
 	MLXSW_TRAP_ID_IP2ME = 0x5F,
 	MLXSW_TRAP_ID_RTR_INGRESS0 = 0x70,
 	MLXSW_TRAP_ID_HOST_MISS_IPV4 = 0x90,

-- 
2.5.5

[patch net 7/9] mlxsw: spectrum: Unmap 802.1Q FID before destroying it

From: Jiri Pirko <jiri@resnulli.us>
Date: 2016-08-15 14:38:05

From: Ido Schimmel <redacted>

Before destroying the 802.1Q FID we should first remove the VID-to-FID
mapping. This makes mlxsw_sp_fid_destroy() symmetric with regards to
mlxsw_sp_fid_create().

Fixes: 14d39461b3f4 ("mlxsw: spectrum: Use per-FID struct for the VLAN-aware bridge")
Signed-off-by: Ido Schimmel <redacted>
Signed-off-by: Jiri Pirko <redacted>
---
 drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
index b5e864d..d1b59cd 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c

@@ -450,6 +450,8 @@ void mlxsw_sp_fid_destroy(struct mlxsw_sp *mlxsw_sp, struct mlxsw_sp_fid *f)
 
 	kfree(f);
 
+	mlxsw_sp_fid_map(mlxsw_sp, fid, false);
+
 	mlxsw_sp_fid_op(mlxsw_sp, fid, false);
 }

-- 
2.5.5

[patch net 6/9] mlxsw: spectrum: Add missing rollbacks in error path

From: Jiri Pirko <jiri@resnulli.us>
Date: 2016-08-15 14:38:06

From: Ido Schimmel <redacted>

While going over the code I noticed we are missing two rollbacks in the
port's creation error path. Add them and adjust the place of one of them
in the port's removal sequence so that both are symmetric.

Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC")
Signed-off-by: Ido Schimmel <redacted>
Signed-off-by: Jiri Pirko <redacted>
---
 drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index 6b69c8a..cb943bc 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c

@@ -2206,6 +2206,7 @@ err_core_port_init:
 	unregister_netdev(dev);
 err_register_netdev:
 	mlxsw_sp->ports[local_port] = NULL;
+	mlxsw_sp_port_switchdev_fini(mlxsw_sp_port);
 	mlxsw_sp_port_pvid_vport_destroy(mlxsw_sp_port);
 err_port_pvid_vport_create:
 	mlxsw_sp_port_dcb_fini(mlxsw_sp_port);

@@ -2215,6 +2216,7 @@ err_port_buffers_init:
 err_port_admin_status_set:
 err_port_mtu_set:
 err_port_speed_by_width_set:
+	mlxsw_sp_port_swid_set(mlxsw_sp_port, MLXSW_PORT_SWID_DISABLED_PORT);
 err_port_swid_set:
 err_port_system_port_mapping_set:
 err_dev_addr_init:

@@ -2237,9 +2239,9 @@ static void mlxsw_sp_port_remove(struct mlxsw_sp *mlxsw_sp, u8 local_port)
 	mlxsw_core_port_fini(&mlxsw_sp_port->core_port);
 	unregister_netdev(mlxsw_sp_port->dev); /* This calls ndo_stop */
 	mlxsw_sp->ports[local_port] = NULL;
+	mlxsw_sp_port_switchdev_fini(mlxsw_sp_port);
 	mlxsw_sp_port_pvid_vport_destroy(mlxsw_sp_port);
 	mlxsw_sp_port_dcb_fini(mlxsw_sp_port);
-	mlxsw_sp_port_switchdev_fini(mlxsw_sp_port);
 	mlxsw_sp_port_swid_set(mlxsw_sp_port, MLXSW_PORT_SWID_DISABLED_PORT);
 	mlxsw_sp_port_module_unmap(mlxsw_sp, mlxsw_sp_port->local_port);
 	free_percpu(mlxsw_sp_port->pcpu_stats);

-- 
2.5.5

[patch net 3/9] mlxsw: spectrum: Create PVID vPort before registering netdevice

From: Jiri Pirko <jiri@resnulli.us>
Date: 2016-08-15 14:38:06

From: Ido Schimmel <redacted>

After registering a netdevice it's possible for user space applications
to configure an IP address on it. From the driver's perspective, this
means a router interface (RIF) should be created for the PVID vPort.

Therefore, we must create the PVID vPort before registering the
netdevice.

Fixes: 99724c18fc66 ("mlxsw: spectrum: Introduce support for router interfaces")
Signed-off-by: Ido Schimmel <redacted>
Signed-off-by: Jiri Pirko <redacted>
---
 drivers/net/ethernet/mellanox/mlxsw/spectrum.c     | 33 +++++++++++++-----
 drivers/net/ethernet/mellanox/mlxsw/spectrum.h     |  2 --
 .../ethernet/mellanox/mlxsw/spectrum_switchdev.c   | 40 +++-------------------
 3 files changed, 29 insertions(+), 46 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index a9281afc..0677f3f 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c

@@ -942,8 +942,8 @@ static void mlxsw_sp_port_vport_destroy(struct mlxsw_sp_port *mlxsw_sp_vport)
 	kfree(mlxsw_sp_vport);
 }
 
-int mlxsw_sp_port_add_vid(struct net_device *dev, __be16 __always_unused proto,
-			  u16 vid)
+static int mlxsw_sp_port_add_vid(struct net_device *dev,
+				 __be16 __always_unused proto, u16 vid)
 {
 	struct mlxsw_sp_port *mlxsw_sp_port = netdev_priv(dev);
 	struct mlxsw_sp_port *mlxsw_sp_vport;

@@ -2048,6 +2048,18 @@ static int mlxsw_sp_port_ets_init(struct mlxsw_sp_port *mlxsw_sp_port)
 	return 0;
 }
 
+static int mlxsw_sp_port_pvid_vport_create(struct mlxsw_sp_port *mlxsw_sp_port)
+{
+	mlxsw_sp_port->pvid = 1;
+
+	return mlxsw_sp_port_add_vid(mlxsw_sp_port->dev, 0, 1);
+}
+
+static int mlxsw_sp_port_pvid_vport_destroy(struct mlxsw_sp_port *mlxsw_sp_port)
+{
+	return mlxsw_sp_port_kill_vid(mlxsw_sp_port->dev, 0, 1);
+}
+
 static int mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port,
 				bool split, u8 module, u8 width, u8 lane)
 {

@@ -2163,6 +2175,13 @@ static int mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port,
 		goto err_port_dcb_init;
 	}
 
+	err = mlxsw_sp_port_pvid_vport_create(mlxsw_sp_port);
+	if (err) {
+		dev_err(mlxsw_sp->bus_info->dev, "Port %d: Failed to create PVID vPort\n",
+			mlxsw_sp_port->local_port);
+		goto err_port_pvid_vport_create;
+	}
+
 	mlxsw_sp_port_switchdev_init(mlxsw_sp_port);
 	err = register_netdev(dev);
 	if (err) {

@@ -2180,18 +2199,14 @@ static int mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port,
 		goto err_core_port_init;
 	}
 
-	err = mlxsw_sp_port_vlan_init(mlxsw_sp_port);
-	if (err)
-		goto err_port_vlan_init;
-
 	mlxsw_sp->ports[local_port] = mlxsw_sp_port;
 	return 0;
 
-err_port_vlan_init:
-	mlxsw_core_port_fini(&mlxsw_sp_port->core_port);
 err_core_port_init:
 	unregister_netdev(dev);
 err_register_netdev:
+	mlxsw_sp_port_pvid_vport_destroy(mlxsw_sp_port);
+err_port_pvid_vport_create:
 	mlxsw_sp_port_dcb_fini(mlxsw_sp_port);
 err_port_dcb_init:
 err_port_ets_init:

@@ -2221,8 +2236,8 @@ static void mlxsw_sp_port_remove(struct mlxsw_sp *mlxsw_sp, u8 local_port)
 	mlxsw_sp->ports[local_port] = NULL;
 	mlxsw_core_port_fini(&mlxsw_sp_port->core_port);
 	unregister_netdev(mlxsw_sp_port->dev); /* This calls ndo_stop */
+	mlxsw_sp_port_pvid_vport_destroy(mlxsw_sp_port);
 	mlxsw_sp_port_dcb_fini(mlxsw_sp_port);
-	mlxsw_sp_port_kill_vid(mlxsw_sp_port->dev, 0, 1);
 	mlxsw_sp_port_switchdev_fini(mlxsw_sp_port);
 	mlxsw_sp_port_swid_set(mlxsw_sp_port, MLXSW_PORT_SWID_DISABLED_PORT);
 	mlxsw_sp_port_module_unmap(mlxsw_sp, mlxsw_sp_port->local_port);

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h
index f69aa37..ab3feb8 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h

@@ -536,8 +536,6 @@ int mlxsw_sp_port_vid_to_fid_set(struct mlxsw_sp_port *mlxsw_sp_port,
 				 u16 vid);
 int mlxsw_sp_port_vlan_set(struct mlxsw_sp_port *mlxsw_sp_port, u16 vid_begin,
 			   u16 vid_end, bool is_member, bool untagged);
-int mlxsw_sp_port_add_vid(struct net_device *dev, __be16 __always_unused proto,
-			  u16 vid);
 int mlxsw_sp_vport_flood_set(struct mlxsw_sp_port *mlxsw_sp_vport, u16 fid,
 			     bool set);
 void mlxsw_sp_port_active_vlans_del(struct mlxsw_sp_port *mlxsw_sp_port);

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
index a1ad5e6..b5e864d 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c

@@ -997,13 +997,13 @@ static int mlxsw_sp_port_obj_add(struct net_device *dev,
 }
 
 static int __mlxsw_sp_port_vlans_del(struct mlxsw_sp_port *mlxsw_sp_port,
-				     u16 vid_begin, u16 vid_end, bool init)
+				     u16 vid_begin, u16 vid_end)
 {
 	struct net_device *dev = mlxsw_sp_port->dev;
 	u16 vid, pvid;
 	int err;
 
-	if (!init && !mlxsw_sp_port->bridged)
+	if (!mlxsw_sp_port->bridged)
 		return -EINVAL;
 
 	err = __mlxsw_sp_port_vlans_set(mlxsw_sp_port, vid_begin, vid_end,

@@ -1014,9 +1014,6 @@ static int __mlxsw_sp_port_vlans_del(struct mlxsw_sp_port *mlxsw_sp_port,
 		return err;
 	}
 
-	if (init)
-		goto out;
-
 	pvid = mlxsw_sp_port->pvid;
 	if (pvid >= vid_begin && pvid <= vid_end) {
 		err = mlxsw_sp_port_pvid_set(mlxsw_sp_port, 0);

@@ -1028,7 +1025,6 @@ static int __mlxsw_sp_port_vlans_del(struct mlxsw_sp_port *mlxsw_sp_port,
 
 	mlxsw_sp_port_fid_leave(mlxsw_sp_port, vid_begin, vid_end);
 
-out:
 	/* Changing activity bits only if HW operation succeded */
 	for (vid = vid_begin; vid <= vid_end; vid++)
 		clear_bit(vid, mlxsw_sp_port->active_vlans);

@@ -1039,8 +1035,8 @@ out:
 static int mlxsw_sp_port_vlans_del(struct mlxsw_sp_port *mlxsw_sp_port,
 				   const struct switchdev_obj_port_vlan *vlan)
 {
-	return __mlxsw_sp_port_vlans_del(mlxsw_sp_port,
-					 vlan->vid_begin, vlan->vid_end, false);
+	return __mlxsw_sp_port_vlans_del(mlxsw_sp_port, vlan->vid_begin,
+					 vlan->vid_end);
 }
 
 void mlxsw_sp_port_active_vlans_del(struct mlxsw_sp_port *mlxsw_sp_port)

@@ -1048,7 +1044,7 @@ void mlxsw_sp_port_active_vlans_del(struct mlxsw_sp_port *mlxsw_sp_port)
 	u16 vid;
 
 	for_each_set_bit(vid, mlxsw_sp_port->active_vlans, VLAN_N_VID)
-		__mlxsw_sp_port_vlans_del(mlxsw_sp_port, vid, vid, false);
+		__mlxsw_sp_port_vlans_del(mlxsw_sp_port, vid, vid);
 }
 
 static int

@@ -1546,32 +1542,6 @@ void mlxsw_sp_switchdev_fini(struct mlxsw_sp *mlxsw_sp)
 	mlxsw_sp_fdb_fini(mlxsw_sp);
 }
 
-int mlxsw_sp_port_vlan_init(struct mlxsw_sp_port *mlxsw_sp_port)
-{
-	struct net_device *dev = mlxsw_sp_port->dev;
-	int err;
-
-	/* Allow only untagged packets to ingress and tag them internally
-	 * with VID 1.
-	 */
-	mlxsw_sp_port->pvid = 1;
-	err = __mlxsw_sp_port_vlans_del(mlxsw_sp_port, 0, VLAN_N_VID - 1,
-					true);
-	if (err) {
-		netdev_err(dev, "Unable to init VLANs\n");
-		return err;
-	}
-
-	/* Add implicit VLAN interface in the device, so that untagged
-	 * packets will be classified to the default vFID.
-	 */
-	err = mlxsw_sp_port_add_vid(dev, 0, 1);
-	if (err)
-		netdev_err(dev, "Failed to configure default vFID\n");
-
-	return err;
-}
-
 void mlxsw_sp_port_switchdev_init(struct mlxsw_sp_port *mlxsw_sp_port)
 {
 	mlxsw_sp_port->dev->switchdev_ops = &mlxsw_sp_port_switchdev_ops;

-- 
2.5.5

[patch net 8/9] mlxsw: spectrum: Allow packets to be trapped from any PG

From: Jiri Pirko <jiri@resnulli.us>
Date: 2016-08-15 14:38:07

From: Ido Schimmel <redacted>

When packets enter the device they are classified to a priority group
(PG) buffer based on their PCP value. After their egress port and
traffic class are determined they are moved to the switch's shared
buffer and await transmission, if:

(Ingress{Port}.Usage < Thres && Ingress{Port,PG}.Usage < Thres &&
 Egress{Port}.Usage < Thres && Egress{Port,TC}.Usage < Thres)
||
(Ingress{Port}.Usage < Min || Ingress{Port,PG} < Min ||
 Egress{Port}.Usage < Min || Egress{Port,TC}.Usage < Min)

Packets scheduled to transmission through CPU port (trapped to CPU) use
traffic class 7, which has a zero maximum and minimum quotas. However,
when such packets arrive from PG 0 they are admitted to the shared
buffer as PG 0 has a non-zero minimum quota.

Allow all packets to be trapped to the CPU - regardless of the PG they
were classified to - by assigning a 10KB minimum quota for CPU port and
TC7.

Fixes: 8e8dfe9fdf06 ("mlxsw: spectrum: Add IEEE 802.1Qaz ETS support")
Reported-by: Tamir Winetroub <redacted>
Tested-by: Tamir Winetroub <redacted>
Signed-off-by: Ido Schimmel <redacted>
Signed-off-by: Jiri Pirko <redacted>
---
 drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c
index 074cdda..237418a 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c

@@ -330,7 +330,7 @@ static const struct mlxsw_sp_sb_cm mlxsw_sp_cpu_port_sb_cms[] = {
 	MLXSW_SP_CPU_PORT_SB_CM,
 	MLXSW_SP_CPU_PORT_SB_CM,
 	MLXSW_SP_CPU_PORT_SB_CM,
-	MLXSW_SP_CPU_PORT_SB_CM,
+	MLXSW_SP_SB_CM(MLXSW_SP_BYTES_TO_CELLS(10000), 0, 0),
 	MLXSW_SP_CPU_PORT_SB_CM,
 	MLXSW_SP_CPU_PORT_SB_CM,
 	MLXSW_SP_CPU_PORT_SB_CM,

-- 
2.5.5

[patch net 4/9] mlxsw: spectrum: Mark port as active before registering it

From: Jiri Pirko <jiri@resnulli.us>
Date: 2016-08-15 14:38:07

From: Ido Schimmel <redacted>

Commit bbf2a4757b30 ("mlxsw: spectrum: Initialize ports at the end of
init sequence") moved ports initialization to the end of the init
sequence, which means ports are the first to be removed during fini.

Since the FDB delayed work is still active when ports are removed it's
possible for it to process FDB notifications of inactive ports,
resulting in a warning message.

Fix that by marking ports as inactive only after unregistering them. The
NETDEV_UNREGISTER event will invoke bridge's driver port removal
sequence that will cause the FDB (and FDB notifications) to be flushed.

Fixes: bbf2a4757b30 ("mlxsw: spectrum: Initialize ports at the end of init sequence")
Signed-off-by: Ido Schimmel <redacted>
Signed-off-by: Jiri Pirko <redacted>
---
 drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index 0677f3f..12681db 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c

@@ -2183,6 +2183,7 @@ static int mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port,
 	}
 
 	mlxsw_sp_port_switchdev_init(mlxsw_sp_port);
+	mlxsw_sp->ports[local_port] = mlxsw_sp_port;
 	err = register_netdev(dev);
 	if (err) {
 		dev_err(mlxsw_sp->bus_info->dev, "Port %d: Failed to register netdev\n",

@@ -2199,12 +2200,12 @@ static int mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port,
 		goto err_core_port_init;
 	}
 
-	mlxsw_sp->ports[local_port] = mlxsw_sp_port;
 	return 0;
 
 err_core_port_init:
 	unregister_netdev(dev);
 err_register_netdev:
+	mlxsw_sp->ports[local_port] = NULL;
 	mlxsw_sp_port_pvid_vport_destroy(mlxsw_sp_port);
 err_port_pvid_vport_create:
 	mlxsw_sp_port_dcb_fini(mlxsw_sp_port);

@@ -2233,9 +2234,9 @@ static void mlxsw_sp_port_remove(struct mlxsw_sp *mlxsw_sp, u8 local_port)
 
 	if (!mlxsw_sp_port)
 		return;
-	mlxsw_sp->ports[local_port] = NULL;
 	mlxsw_core_port_fini(&mlxsw_sp_port->core_port);
 	unregister_netdev(mlxsw_sp_port->dev); /* This calls ndo_stop */
+	mlxsw_sp->ports[local_port] = NULL;
 	mlxsw_sp_port_pvid_vport_destroy(mlxsw_sp_port);
 	mlxsw_sp_port_dcb_fini(mlxsw_sp_port);
 	mlxsw_sp_port_switchdev_fini(mlxsw_sp_port);

-- 
2.5.5

[patch net 9/9] mlxsw: reg: Fix missing op field fill-up

From: Jiri Pirko <jiri@resnulli.us>
Date: 2016-08-15 14:38:08

From: Jiri Pirko <redacted>

Ralue pack function needs to set op, otherwise it is 0 for add always.

Fixes: d5a1c749d22 ("mlxsw: reg: Add Router Algorithmic LPM Unicast Entry Register definition")
Signed-off-by: Jiri Pirko <redacted>
---
 drivers/net/ethernet/mellanox/mlxsw/reg.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index 7ca9201..14a5731 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h

@@ -4000,6 +4000,7 @@ static inline void mlxsw_reg_ralue_pack(char *payload,
 {
 	MLXSW_REG_ZERO(ralue, payload);
 	mlxsw_reg_ralue_protocol_set(payload, protocol);
+	mlxsw_reg_ralue_op_set(payload, op);
 	mlxsw_reg_ralue_virtual_router_set(payload, virtual_router);
 	mlxsw_reg_ralue_prefix_len_set(payload, prefix_len);
 	mlxsw_reg_ralue_entry_type_set(payload,

-- 
2.5.5

RE: [patch net 5/9] mlxsw: spectrum: Add missing packet traps

From: Ilan Tayari <hidden>
Date: 2016-08-15 19:24:51

Add the following traps:

1) MTU Error: Trap packets whose size is bigger than the egress RIF's MTU. If DF
bit isn't set, traffic will continue to be routed in slow path.

2) TTL Error: Trap packets whose TTL expired. This allows traceroute to work
properly.

3) OSPF packets.

Don't you need LBERROR as well?

Re: [patch net 5/9] mlxsw: spectrum: Add missing packet traps

From: Ido Schimmel <hidden>
Date: 2016-08-15 19:56:36

On Mon, Aug 15, 2016 at 02:51:20PM +0000, Ilan Tayari wrote:

quoted

Add the following traps:

1) MTU Error: Trap packets whose size is bigger than the egress RIF's MTU. If DF
bit isn't set, traffic will continue to be routed in slow path.

2) TTL Error: Trap packets whose TTL expired. This allows traceroute to work
properly.

3) OSPF packets.

Don't you need LBERROR as well?

Yep. Will send v2 tomorrow morning.

Thanks!

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help