diff --git a/drivers/net/can/rcar/rcar_canfd.c b/drivers/net/can/rcar/rcar_canfd.c
new file mode 100644
index 0000000..e198732
--- /dev/null
+++ b/drivers/net/can/rcar/rcar_canfd.c

@@ -0,0 +1,1624 @@
+/* Renesas R-Car CAN FD device driver
+ *
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/* The R-Car CAN FD controller can operate in either one of the below two modes
+ *  - CAN FD only mode
+ *  - Classical CAN (CAN 2.0) only mode
+ *
+ * This driver puts the controller in CAN FD only mode by default. In this
+ * mode, the controller acts as a CAN FD node that can also interoperate with
+ * CAN 2.0 nodes.
+ *
+ * As of now, this driver does not support the Classical CAN (CAN 2.0) mode,
+ * which is handled by a different register map compared to CAN FD only mode.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/platform_device.h>
+#include <linux/can/led.h>
+#include <linux/can/dev.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/bitmap.h>
+#include <linux/bitops.h>
+#include <linux/iopoll.h>
+
+#define RCANFD_DRV_NAME                        "rcar_canfd"
+
+#define RCANFD_FIFO_DEPTH              8       /* Tx FIFO depth */
+#define RCANFD_NAPI_WEIGHT             8       /* Rx poll quota */
+
+#define RCANFD_NUM_CHANNELS            2       /* Two channels max */
+#define RCANFD_CHANNELS_MASK           BIT((RCANFD_NUM_CHANNELS) - 1)
+
+/* Rx FIFO is a global resource of the controller. There are 8 such FIFOs
+ * available. Each channel gets a dedicated Rx FIFO (i.e.) the channel
+ * number is added to RFFIFO index.
+ */
+#define RCANFD_RFFIFO_IDX              0
+
+/* Tx/Rx or Common FIFO is a per channel resource. Each channel has 3 Common
+ * FIFOs dedicated to them. Use the first (index 0) FIFO out of the 3 for Tx.
+ */
+#define RCANFD_CFFIFO_IDX              0
+
+/* Global register bits */
+#define RCANFD_GINTF_CANFD             BIT(0)
+
+#define RCANFD_GCFG_TPRI               BIT(0)
+#define RCANFD_GCFG_DCE                        BIT(1)
+#define RCANFD_GCFG_DCS                        BIT(4)
+#define RCANFD_GCFG_CMPOC              BIT(5)