RE: [PATCH] can: rcar_canfd: Add Renesas R-Car CAN FD driver

Hi Oliver,

Thanks for the review.

On 03/01/2016 10:34 AM, Ramesh Shanmugasundaram wrote:

quoted

This patch adds support for the CAN FD controller found in Renesas
R-Car SoCs. The controller operates in CAN FD mode by default. Two
test modes are available and can be enabled by the
"rcar_canfd.testmode" module parameter. Refer to Documentation/kernel-

parameters.txt.

(..)

quoted

+#ifdef CONFIG_DEBUG_FS
+#include <linux/debugfs.h>
+
+static int rcar_canfd_showregs(struct seq_file *s, void *data) {
+	struct rcar_canfd_channel *priv = s->private;
+	u32 ch = priv->channel;
+	u32 rf = ch + RCANFD_RFFIFO_IDX;
+	u32 cf = RCANFD_CFFIFO_IDX;
+	u32 val, offset, i;
+
+	if (testmode)
+		seq_printf(s, "RCANFD : testmode = %d\n", testmode);
+	seq_printf(s, "RCANFD register dump: channel %u\n", ch);
+	seq_printf(s, "%-40s: %x\n", "g: cfg",
+		   rcar_canfd_read(priv, RCANFD_GCFG));

Why do you think you would need this kind of register dumps in debugfs?

This could be interesting for development purposes - but in production
drivers this is pretty unusual and needless.

I thought it would be useful when we add more features to the driver (e.g. Gateway mode).
 

I would sugest to remove either the testmode (already suggested by Marc)
and this register dump stuff.

OK. I'll remove both.

Thanks,
Ramesh