[PATCH net-next v4 2/6] net: dsa: Initialize ds->enabled_port_mask and ds->phys_mii_mask
From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2016-06-07 23:32:56
Subsystem:
networking [dsa], networking [general], the rest · Maintainers:
Andrew Lunn, Vladimir Oltean, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Some drivers rely on these two bitmasks to contain the correct values for them to successfully probe and initialize at drv->setup() time, calculate correct values to put in both masks as early as possible in dsa_get_ports_dn(). Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- net/dsa/dsa2.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c
index 80dfe08db825..921a36fd139d 100644
--- a/net/dsa/dsa2.c
+++ b/net/dsa/dsa2.c@@ -283,6 +283,7 @@ static void dsa_user_port_unapply(struct device_node *port, u32 index, if (ds->ports[index].netdev) { dsa_slave_destroy(ds->ports[index].netdev); ds->ports[index].netdev = NULL; + ds->enabled_port_mask &= ~(1 << index); } }
@@ -292,6 +293,13 @@ static int dsa_ds_apply(struct dsa_switch_tree *dst, struct dsa_switch *ds) u32 index; int err; + /* Initialize ds->phys_mii_mask before registering the slave MDIO bus + * driver and before drv->setup() has run, since the switch drivers and + * the slave MDIO bus driver rely on these values for probing PHY + * devices or not + */ + ds->phys_mii_mask = ds->enabled_port_mask; + err = ds->drv->setup(ds); if (err < 0) return err;
@@ -511,6 +519,13 @@ static int dsa_parse_ports_dn(struct device_node *ports, struct dsa_switch *ds) return -EINVAL; ds->ports[reg].dn = port; + + /* Initialize enabled_port_mask now for drv->setup() + * to have access to a correct value, just like what + * net/dsa/dsa.c::dsa_switch_setup_one does. + */ + if (!dsa_port_is_cpu(port)) + ds->enabled_port_mask |= 1 << reg; } return 0;
--
2.7.4