Thread (33 messages) 33 messages, 3 authors, 2016-04-07

[PATCH net-next V3 00/16] net: fec: cleanup and fixes

flat view
STALE3846d

From: Troy Kisky <hidden>
Date: 2016-04-06 02:25:46
Also in: linux-arm-kernel

Revision v3 of 9 in this series.

Revisions (9)
  1. v2 [diff vs current]
  2. v2 [diff vs current]
  3. v2 [diff vs current]
  4. v3 current
  5. v3
  6. v3
  7. v3
  8. v3
  9. v3
V3 has

1 dropped patch "net: fec: print more debug info in fec_timeout"
2 new patches
0002-net-fec-remove-unused-interrupt-FEC_ENET_TS_TIMER.patch
0003-net-fec-return-IRQ_HANDLED-if-fec_ptp_check_pps_even.patch

1 combined patch
0004-net-fec-pass-rxq-txq-to-fec_enet_rx-tx_queue-instead.patch

The changes are noted on individual patches

My measured performance of this series is

before patch set
365 Mbits/sec Tx/407 RX

after patch set
374 Tx/427 Rx


Troy Kisky (16):
  net: fec: only check queue 0 if RXF_0/TXF_0 interrupt is set
  net: fec: remove unused interrupt FEC_ENET_TS_TIMER
  net: fec: return IRQ_HANDLED if fec_ptp_check_pps_event handled it
  net: fec: pass rxq/txq to fec_enet_rx/tx_queue instead of queue_id
  net: fec: reduce interrupts
  net: fec: split off napi routine with 3 queues
  net: fec: don't clear all rx queue bits when just one is being checked
  net: fec: set cbd_sc without relying on previous value
  net: fec: eliminate calls to fec_enet_get_prevdesc
  net: fec: move restart test for efficiency
  net: fec: clear cbd_sc after transmission to help with debugging
  net: fec: dump all tx queues in fec_dump
  net: fec: detect tx int lost
  net: fec: create subroutine reset_tx_queue
  net: fec: call dma_unmap_single on mapped tx buffers at restart
  net: fec: don't set cbd_bufaddr unless no mapping error

 drivers/net/ethernet/freescale/fec.h      |  10 +-
 drivers/net/ethernet/freescale/fec_main.c | 410 ++++++++++++++++--------------
 2 files changed, 218 insertions(+), 202 deletions(-)

-- 
2.5.0
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help