[PATCH v3(linux-sti-3.10)(net.git) 1/2] Revert "stmmac: Fix 'eth0: No PHY found' regression"
From: Giuseppe Cavallaro <hidden>
Date: 2016-03-11 13:27:02
Subsystem:
networking drivers, stmmac ethernet driver, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Maxime Chevallier, Linus Torvalds
This reverts commit 88f8b1bb41c6208f81b6a480244533ded7b59493. due to problems on GeekBox and Banana Pi M1 board when connected to a real transceiver instead of a switch via fixed-link. Signed-off-by: Giuseppe Cavallaro <redacted> Cc: Gabriel Fernandez <redacted> Cc: Andreas Färber <afaerber@suse.de> Cc: Frank Schäfer <redacted> Cc: Dinh Nguyen <redacted> Cc: David S. Miller <davem@davemloft.net> --- drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 11 ++++++++++- .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 9 +-------- include/linux/stmmac.h | 1 - 3 files changed, 11 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index efb54f3..0faf163 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c@@ -199,12 +199,21 @@ int stmmac_mdio_register(struct net_device *ndev) struct stmmac_priv *priv = netdev_priv(ndev); struct stmmac_mdio_bus_data *mdio_bus_data = priv->plat->mdio_bus_data; int addr, found; - struct device_node *mdio_node = priv->plat->mdio_node; + struct device_node *mdio_node = NULL; + struct device_node *child_node = NULL; if (!mdio_bus_data) return 0; if (IS_ENABLED(CONFIG_OF)) { + for_each_child_of_node(priv->device->of_node, child_node) { + if (of_device_is_compatible(child_node, + "snps,dwmac-mdio")) { + mdio_node = child_node; + break; + } + } + if (mdio_node) { netdev_dbg(ndev, "FOUND MDIO subnode\n"); } else {
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 4514ba7..6a52fa1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c@@ -110,7 +110,6 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac) struct device_node *np = pdev->dev.of_node; struct plat_stmmacenet_data *plat; struct stmmac_dma_cfg *dma_cfg; - struct device_node *child_node = NULL; plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL); if (!plat)
@@ -141,19 +140,13 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac) plat->phy_node = of_node_get(np); } - for_each_child_of_node(np, child_node) - if (of_device_is_compatible(child_node, "snps,dwmac-mdio")) { - plat->mdio_node = child_node; - break; - } - /* "snps,phy-addr" is not a standard property. Mark it as deprecated * and warn of its use. Remove this when phy node support is added. */ if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0) dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n"); - if ((plat->phy_node && !of_phy_is_fixed_link(np)) || !plat->mdio_node) + if ((plat->phy_node && !of_phy_is_fixed_link(np)) || plat->phy_bus_name) plat->mdio_bus_data = NULL; else plat->mdio_bus_data =
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index 881a79d..eead8ab 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h@@ -100,7 +100,6 @@ struct plat_stmmacenet_data { int interface; struct stmmac_mdio_bus_data *mdio_bus_data; struct device_node *phy_node; - struct device_node *mdio_node; struct stmmac_dma_cfg *dma_cfg; int clk_csr; int has_gmac;
--
1.7.4.4