[PATCH 0/3] Enable Ethernet on STM32F429 EVAL board

This series adds Ethernet support on STM32F429 SOC and enable it on Eval
board:
 -Add Ethernet node in SOC file:
  -Define MII mode pinctrl
  -use Mixed burst and PBL 8
 -Add system config node for glue.
 -Enable Ethernet for Eval board:
  -mii mode
  -connected to a PHY through MDIO.

Note, this series follow the series which adds glue and update stmmac driver:

https://lkml.org/lkml/2016/2/26/329

Best regards.

Alex

Alexandre TORGUE (3):
  ARM: dts: stm32f429: Add system config bank node
  ARM: dts: stm32f429: Add Ethernet support
  ARM: dts: stm32f429: Enable Ethernet on Eval board

 arch/arm/boot/dts/stm32429i-eval.dts | 15 ++++++++++++++
 arch/arm/boot/dts/stm32f429.dtsi     | 40 ++++++++++++++++++++++++++++++++++++
 2 files changed, 55 insertions(+)

-- 
1.9.1