[PATCH 0/3] Enable Ethernet on STM32F429 EVAL board

From
Alexandre TORGUE <hidden>
Date
2016-02-29 16:29:44
Also in
linux-arm-kernel, lkml, netdev
This series adds Ethernet support on STM32F429 SOC and enable it on Eval
board:
 -Add Ethernet node in SOC file:
  -Define MII mode pinctrl
  -use Mixed burst and PBL 8
 -Add system config node for glue.
 -Enable Ethernet for Eval board:
  -mii mode
  -connected to a PHY through MDIO.

Note, this series follow the series which adds glue and update stmmac driver:

https://lkml.org/lkml/2016/2/26/329

Best regards.

Alex

Alexandre TORGUE (3):
  ARM: dts: stm32f429: Add system config bank node
  ARM: dts: stm32f429: Add Ethernet support
  ARM: dts: stm32f429: Enable Ethernet on Eval board

 arch/arm/boot/dts/stm32429i-eval.dts | 15 ++++++++++++++
 arch/arm/boot/dts/stm32f429.dtsi     | 40 ++++++++++++++++++++++++++++++++++++
 2 files changed, 55 insertions(+)

-- 
1.9.1
Thread (6 messages) 6 messages, 2 authors, last reply 2016-03-02
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help