Commit 0b50dc4fc971 ("Convert smsc911x to use ACPI as well as DT") makes
the call to smsc911x_probe_config() unconditional, and no longer fails if
there is no device node. device_get_phy_mode() is called unconditionally,
and if there is no phy node configured returns an error code. This error
code is assigned to phy_interface, and interpreted elsewhere in the code
as valid phy mode. This in turn causes qemu to crash when running a
variant of realview_pb_defconfig.
qemu: hardware error: lan9118_read: Bad reg 0x86
Fixes: 0b50dc4fc971 ("Convert smsc911x to use ACPI as well as DT")
Cc: Jeremy Linton <redacted>
Cc Graeme Gregory [off-list ref]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
drivers/net/ethernet/smsc/smsc911x.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
Commit 0b50dc4fc971 ("Convert smsc911x to use ACPI as well as DT") makes
the call to smsc911x_probe_config() unconditional, and no longer fails if
there is no device node. device_get_phy_mode() is called unconditionally,
and if there is no phy node configured returns an error code. This error
code is assigned to phy_interface, and interpreted elsewhere in the code
as valid phy mode. This in turn causes qemu to crash when running a
variant of realview_pb_defconfig.
qemu: hardware error: lan9118_read: Bad reg 0x86
Fixes: 0b50dc4fc971 ("Convert smsc911x to use ACPI as well as DT")
Cc: Jeremy Linton <redacted>
Cc Graeme Gregory [off-list ref]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
From: Jeremy Linton <hidden> Date: 2015-08-17 21:19:51
On 08/17/2015 03:45 PM, Guenter Roeck wrote:
Commit 0b50dc4fc971 ("Convert smsc911x to use ACPI as well as DT") makes
the call to smsc911x_probe_config() unconditional, and no longer fails if
there is no device node. device_get_phy_mode() is called unconditionally,
and if there is no phy node configured returns an error code. This error
code is assigned to phy_interface, and interpreted elsewhere in the code
as valid phy mode. This in turn causes qemu to crash when running a
variant of realview_pb_defconfig.
Thanks for catching that! I have a couple other minor cleanups per the
reviewers.
Jeremy
Commit 0b50dc4fc971 ("Convert smsc911x to use ACPI as well as DT") makes
the call to smsc911x_probe_config() unconditional, and no longer fails if
there is no device node. device_get_phy_mode() is called unconditionally,
and if there is no phy node configured returns an error code. This error
code is assigned to phy_interface, and interpreted elsewhere in the code
as valid phy mode. This in turn causes qemu to crash when running a
variant of realview_pb_defconfig.
Thanks for catching that! I have a couple other minor cleanups per the reviewers.
One nitpick I noticed after sending my patch: dev can never be NULL in
smsc911x_probe_config(), so it does not really make sense to check if it is NULL.
Guenter
From: Jeremy Linton <hidden> Date: 2015-08-17 22:35:08
On 08/17/2015 05:14 PM, Guenter Roeck wrote:
One nitpick I noticed after sending my patch: dev can never be NULL in
smsc911x_probe_config(), so it does not really make sense to check if it is NULL.
No, it doesn't... it should really be something like
if (dev_fwnode(dev))
But dev_fwnode is static inline in property.c, and i'm pretty sure that
still isn't 100% correct.The best plan might just be to remove the
check, and abort on failure to find the phy property per your patch.
Commit 0b50dc4fc971 ("Convert smsc911x to use ACPI as well as DT") makes
the call to smsc911x_probe_config() unconditional, and no longer fails if
there is no device node. device_get_phy_mode() is called unconditionally,
and if there is no phy node configured returns an error code. This error
code is assigned to phy_interface, and interpreted elsewhere in the code
as valid phy mode. This in turn causes qemu to crash when running a
variant of realview_pb_defconfig.
qemu: hardware error: lan9118_read: Bad reg 0x86
Fixes: 0b50dc4fc971 ("Convert smsc911x to use ACPI as well as DT")
Cc: Jeremy Linton <redacted>
Cc Graeme Gregory [off-list ref]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
drivers/net/ethernet/smsc/smsc911x.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
Looks like this change makes at least omap boards using smsc911x
fail with -22 for me in Linux next.
Do any of the the device tree configured smsc911x devices actually
have a phy configured?
Regards,
Tony
From: Jeremy Linton <hidden> Date: 2015-08-26 17:31:45
On 08/26/2015 12:04 PM, Tony Lindgren wrote:
* Guenter Roeck [off-list ref] [150817 13:48]:
quoted
Commit 0b50dc4fc971 ("Convert smsc911x to use ACPI as well as DT") makes
Looks like this change makes at least omap boards using smsc911x
fail with -22 for me in Linux next.
Do any of the the device tree configured smsc911x devices actually
have a phy configured?
Tony,
Looks like all the ones in the kernel boot/dts directory have a phy
including the omap3-lilly except for the ste-snowball.dts.
Do you have smsc,force-internal-phy set instead?
Thanks,
Commit 0b50dc4fc971 ("Convert smsc911x to use ACPI as well as DT") makes
the call to smsc911x_probe_config() unconditional, and no longer fails if
there is no device node. device_get_phy_mode() is called unconditionally,
and if there is no phy node configured returns an error code. This error
code is assigned to phy_interface, and interpreted elsewhere in the code
as valid phy mode. This in turn causes qemu to crash when running a
variant of realview_pb_defconfig.
qemu: hardware error: lan9118_read: Bad reg 0x86
Fixes: 0b50dc4fc971 ("Convert smsc911x to use ACPI as well as DT")
Cc: Jeremy Linton <redacted>
Cc Graeme Gregory [off-list ref]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
drivers/net/ethernet/smsc/smsc911x.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
Looks like this change makes at least omap boards using smsc911x
fail with -22 for me in Linux next.
What do you see if you revert my patch ? It should assign -22, or its
unsigned representation, to phy_interface, which isn't such a good idea
either.
Do any of the the device tree configured smsc911x devices actually
have a phy configured?
Good question, and beats me. Looking into the original code,
it didn't check for an error return from of_get_phy_mode() either,
and thus _would_ dutifully assign the error code to phy_interface.
Wonder how was this supposed to work to start with.
I'll do some debugging and try to find out what exactly is going on.
Guenter
From: Tony Lindgren <tony@atomide.com> Date: 2015-08-26 17:48:40
* Jeremy Linton [off-list ref] [150826 10:35]:
On 08/26/2015 12:04 PM, Tony Lindgren wrote:
quoted
* Guenter Roeck [off-list ref] [150817 13:48]:
quoted
Commit 0b50dc4fc971 ("Convert smsc911x to use ACPI as well as DT") makes
Looks like this change makes at least omap boards using smsc911x
fail with -22 for me in Linux next.
Do any of the the device tree configured smsc911x devices actually
have a phy configured?
Tony,
Looks like all the ones in the kernel boot/dts directory have a phy
including the omap3-lilly except for the ste-snowball.dts.
Do you have smsc,force-internal-phy set instead?
Hmm most of them are using omap-gpmc-smsc911x.dtsi and
omap-gpmc-smsc9221.dtsi which are set up the same way as
omap3-lilly. So no phy.
Regards,
Tony
Commit 0b50dc4fc971 ("Convert smsc911x to use ACPI as well as DT") makes
the call to smsc911x_probe_config() unconditional, and no longer fails if
there is no device node. device_get_phy_mode() is called unconditionally,
and if there is no phy node configured returns an error code. This error
code is assigned to phy_interface, and interpreted elsewhere in the code
as valid phy mode. This in turn causes qemu to crash when running a
variant of realview_pb_defconfig.
qemu: hardware error: lan9118_read: Bad reg 0x86
Fixes: 0b50dc4fc971 ("Convert smsc911x to use ACPI as well as DT")
Cc: Jeremy Linton <redacted>
Cc Graeme Gregory [off-list ref]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
drivers/net/ethernet/smsc/smsc911x.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
Looks like this change makes at least omap boards using smsc911x
fail with -22 for me in Linux next.
What do you see if you revert my patch ? It should assign -22, or its
unsigned representation, to phy_interface, which isn't such a good idea
either.
If I revert patch "smsc911x: Fix crash seen if neither ACPI nor OF is
configured or used" things work as just assign config->phy_interface
directly without returning early. It's -22 in that case also.
quoted
Do any of the the device tree configured smsc911x devices actually
have a phy configured?
Good question, and beats me. Looking into the original code,
it didn't check for an error return from of_get_phy_mode() either,
and thus _would_ dutifully assign the error code to phy_interface.
Wonder how was this supposed to work to start with.
I'll do some debugging and try to find out what exactly is going on.
Looks like adding "smsc,force-internal-phy" to omap-gpmc-smsc9221.dtsi
does not help. Somehow the default behavior is now different.
Regards,
Tony
Commit 0b50dc4fc971 ("Convert smsc911x to use ACPI as well as DT") makes
the call to smsc911x_probe_config() unconditional, and no longer fails if
there is no device node. device_get_phy_mode() is called unconditionally,
and if there is no phy node configured returns an error code. This error
code is assigned to phy_interface, and interpreted elsewhere in the code
as valid phy mode. This in turn causes qemu to crash when running a
variant of realview_pb_defconfig.
qemu: hardware error: lan9118_read: Bad reg 0x86
Fixes: 0b50dc4fc971 ("Convert smsc911x to use ACPI as well as DT")
Cc: Jeremy Linton <redacted>
Cc Graeme Gregory [off-list ref]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
drivers/net/ethernet/smsc/smsc911x.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
Looks like this change makes at least omap boards using smsc911x
fail with -22 for me in Linux next.
Do any of the the device tree configured smsc911x devices actually
have a phy configured?
Ok, this is more subtle than I thought.
Previously, the code would not attempt any devicetree configuration
if devicetree was not configured.
Now it does.
The error return from device_get_phy_mode() isn't the actual problem.
Apparently it doesn't really matter if a nonsensical value is assigned
to phy_interface.
The problem is that the reg-io-width property is obviously not present
in the non-dt and non-acpi case. This overwrites the existing platform data
configuration and selects 16 bit mode, to which the (simulated) hardware
obviously reacts less than enthusiastic.
Fixing this properly won't be easy. If the "reg-io-width" property
is not present or wrong, the default register width is 16 bit. Obviously,
if neither DT nor ACPI is available, it won't be present. This causes
the crash I had observed.
Bad part is that there does not seem to be a reliable means to detect
that platform data should be used in that situation. Other device_get_XXX
functions return -ENXIO if that happens, but not device_property_read_u32().
It is _supposed_ to return it per its API, but it doesn't (it returns
-ENODATA).
We may need two separate patches, one to fix up device_property_read_u32()
to return -ENXIO, and one to fix smsc911x_probe_config() to ignore the error
from device_get_phy_mode(), and to bail out if device_property_read_u32()
returns -ENXIO.
The simpler alternative would be to check the return value from
device_property_read_u32() for both -ENXIO and -ENODATA.
This would make the code independent of the necessary core changes
(which may take a while). I tested this variant, and it works, at least
for the non-DT case.
Does this make sense ?
Thanks,
Guenter
Commit 0b50dc4fc971 ("Convert smsc911x to use ACPI as well as DT") makes
the call to smsc911x_probe_config() unconditional, and no longer fails if
there is no device node. device_get_phy_mode() is called unconditionally,
and if there is no phy node configured returns an error code. This error
code is assigned to phy_interface, and interpreted elsewhere in the code
as valid phy mode. This in turn causes qemu to crash when running a
variant of realview_pb_defconfig.
qemu: hardware error: lan9118_read: Bad reg 0x86
Fixes: 0b50dc4fc971 ("Convert smsc911x to use ACPI as well as DT")
Cc: Jeremy Linton <redacted>
Cc Graeme Gregory [off-list ref]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
drivers/net/ethernet/smsc/smsc911x.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
Looks like this change makes at least omap boards using smsc911x
fail with -22 for me in Linux next.
Do any of the the device tree configured smsc911x devices actually
have a phy configured?
Ok, this is more subtle than I thought.
Previously, the code would not attempt any devicetree configuration
if devicetree was not configured.
Now it does.
The error return from device_get_phy_mode() isn't the actual problem.
Apparently it doesn't really matter if a nonsensical value is assigned
to phy_interface.
The problem is that the reg-io-width property is obviously not present
in the non-dt and non-acpi case. This overwrites the existing platform data
configuration and selects 16 bit mode, to which the (simulated) hardware
obviously reacts less than enthusiastic.
Fixing this properly won't be easy. If the "reg-io-width" property
is not present or wrong, the default register width is 16 bit. Obviously,
if neither DT nor ACPI is available, it won't be present. This causes
the crash I had observed.
Heh OK :)
Bad part is that there does not seem to be a reliable means to detect
that platform data should be used in that situation. Other device_get_XXX
functions return -ENXIO if that happens, but not device_property_read_u32().
It is _supposed_ to return it per its API, but it doesn't (it returns
-ENODATA).
We may need two separate patches, one to fix up device_property_read_u32()
to return -ENXIO, and one to fix smsc911x_probe_config() to ignore the error
from device_get_phy_mode(), and to bail out if device_property_read_u32()
returns -ENXIO.
I guess the device_property_read_u32() change needs to be discussed
separately.. So probably best to fix up the regression to smsc911x
first.
The simpler alternative would be to check the return value from
device_property_read_u32() for both -ENXIO and -ENODATA.
This would make the code independent of the necessary core changes
(which may take a while). I tested this variant, and it works, at least
for the non-DT case.
Does this make sense ?
Yeh I think that would allow fixing up the smsc911x regression while
discussing the device_property_read_u32() change. Got a test patch
for me to try?
Regards,
Tony
Hi Tony,
On 08/26/2015 01:16 PM, Tony Lindgren wrote:
[ ... ]
quoted
We may need two separate patches, one to fix up device_property_read_u32()
to return -ENXIO, and one to fix smsc911x_probe_config() to ignore the error
from device_get_phy_mode(), and to bail out if device_property_read_u32()
returns -ENXIO.
I guess the device_property_read_u32() change needs to be discussed
separately.. So probably best to fix up the regression to smsc911x
first.
Not sure myself. Jeremy has a point - we don't really know for sure how
safe it is to check for -ENODATA (in addition to -ENXIO). Also, fixing
device_property_read_u32() turned out to be much easier than I thought.
quoted
The simpler alternative would be to check the return value from
device_property_read_u32() for both -ENXIO and -ENODATA.
This would make the code independent of the necessary core changes
(which may take a while). I tested this variant, and it works, at least
for the non-DT case.
Does this make sense ?
Yeh I think that would allow fixing up the smsc911x regression while
discussing the device_property_read_u32() change. Got a test patch
for me to try?
You should have two by now to choose from.
Guenter
From: Tony Lindgren <tony@atomide.com> Date: 2015-08-26 21:40:39
* Guenter Roeck [off-list ref] [150826 13:58]:
Hi Tony,
On 08/26/2015 01:16 PM, Tony Lindgren wrote:
[ ... ]
quoted
quoted
We may need two separate patches, one to fix up device_property_read_u32()
to return -ENXIO, and one to fix smsc911x_probe_config() to ignore the error
from device_get_phy_mode(), and to bail out if device_property_read_u32()
returns -ENXIO.
I guess the device_property_read_u32() change needs to be discussed
separately.. So probably best to fix up the regression to smsc911x
first.
Not sure myself. Jeremy has a point - we don't really know for sure how
safe it is to check for -ENODATA (in addition to -ENXIO). Also, fixing
device_property_read_u32() turned out to be much easier than I thought.
quoted
quoted
The simpler alternative would be to check the return value from
device_property_read_u32() for both -ENXIO and -ENODATA.
This would make the code independent of the necessary core changes
(which may take a while). I tested this variant, and it works, at least
for the non-DT case.
Does this make sense ?
Yeh I think that would allow fixing up the smsc911x regression while
discussing the device_property_read_u32() change. Got a test patch
for me to try?