[PATCH] usb: plusb: Add support for National Instruments host-to-host cable
flat view
STALE4255d
From: Ben Shelton <hidden>
Date: 2015-02-16 19:49:30
Also in:
lkml
Subsystem:
networking drivers, the rest, usb networking drivers · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
The National Instruments USB Host-to-Host Cable is based on the Prolific PL-25A1 chipset. Add its VID/PID so the plusb driver will recognize it. Signed-off-by: Ben Shelton <redacted> --- drivers/net/usb/plusb.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/drivers/net/usb/plusb.c b/drivers/net/usb/plusb.c
index 3d18bb0..1bfe0fc 100644
--- a/drivers/net/usb/plusb.c
+++ b/drivers/net/usb/plusb.c@@ -134,6 +134,11 @@ static const struct usb_device_id products [] = { }, { USB_DEVICE(0x050d, 0x258a), /* Belkin F5U258/F5U279 (PL-25A1) */ .driver_info = (unsigned long) &prolific_info, +}, { + USB_DEVICE(0x3923, 0x7825), /* National Instruments USB + * Host-to-Host Cable + */ + .driver_info = (unsigned long) &prolific_info, }, { }, // END
--
2.3.0