[PATCH] usb: plusb: Add support for National Instruments host-to-host cable

The National Instruments USB Host-to-Host Cable is based on the Prolific
PL-25A1 chipset.  Add its VID/PID so the plusb driver will recognize it.

Signed-off-by: Ben Shelton <redacted>
---
 drivers/net/usb/plusb.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/usb/plusb.c b/drivers/net/usb/plusb.c
index 3d18bb0..1bfe0fc 100644
--- a/drivers/net/usb/plusb.c
+++ b/drivers/net/usb/plusb.c

@@ -134,6 +134,11 @@ static const struct usb_device_id	products [] = {
 }, {
 	USB_DEVICE(0x050d, 0x258a),     /* Belkin F5U258/F5U279 (PL-25A1) */
 	.driver_info =  (unsigned long) &prolific_info,
+}, {
+	USB_DEVICE(0x3923, 0x7825),     /* National Instruments USB
+					 * Host-to-Host Cable
+					 */
+	.driver_info =  (unsigned long) &prolific_info,
 },
 
 	{ },		// END

-- 
2.3.0

From: Ben Shelton <redacted>
Date: Mon, 16 Feb 2015 13:47:06 -0600

The National Instruments USB Host-to-Host Cable is based on the Prolific
PL-25A1 chipset.  Add its VID/PID so the plusb driver will recognize it.

Signed-off-by: Ben Shelton <redacted>

Applied, thanks.

On 02/20, David Miller wrote:

From: Ben Shelton <redacted>
Date: Mon, 16 Feb 2015 13:47:06 -0600

quoted

The National Instruments USB Host-to-Host Cable is based on the Prolific
PL-25A1 chipset.  Add its VID/PID so the plusb driver will recognize it.

Signed-off-by: Ben Shelton <redacted>

Applied, thanks.

Hi David,

Is this something you think would go into stable as well?

Thanks,
Ben

From: Ben Shelton <redacted>
Date: Fri, 27 Feb 2015 15:26:32 -0600

On 02/20, David Miller wrote:

quoted

From: Ben Shelton <redacted>
Date: Mon, 16 Feb 2015 13:47:06 -0600

quoted

The National Instruments USB Host-to-Host Cable is based on the Prolific
PL-25A1 chipset.  Add its VID/PID so the plusb driver will recognize it.

Signed-off-by: Ben Shelton <redacted>

Applied, thanks.

Hi David,

Is this something you think would go into stable as well?

I'm ambivalent.

On 02/27, David Miller wrote:

From: Ben Shelton <redacted>
Date: Fri, 27 Feb 2015 15:26:32 -0600

quoted

On 02/20, David Miller wrote:

quoted

From: Ben Shelton <redacted>
Date: Mon, 16 Feb 2015 13:47:06 -0600

quoted

The National Instruments USB Host-to-Host Cable is based on the Prolific
PL-25A1 chipset.  Add its VID/PID so the plusb driver will recognize it.

Signed-off-by: Ben Shelton <redacted>

Applied, thanks.

Hi David,

Is this something you think would go into stable as well?

I'm ambivalent.

In that case, could you go ahead and apply it to stable as well?

Thanks,
Ben

From: Ben Shelton <redacted>
Date: Mon, 2 Mar 2015 10:00:14 -0600

On 02/27, David Miller wrote:

quoted

From: Ben Shelton <redacted>
Date: Fri, 27 Feb 2015 15:26:32 -0600

quoted

On 02/20, David Miller wrote:

quoted

From: Ben Shelton <redacted>
Date: Mon, 16 Feb 2015 13:47:06 -0600

quoted

The National Instruments USB Host-to-Host Cable is based on the Prolific
PL-25A1 chipset.  Add its VID/PID so the plusb driver will recognize it.

Signed-off-by: Ben Shelton <redacted>

Applied, thanks.

Hi David,

Is this something you think would go into stable as well?

I'm ambivalent.

In that case, could you go ahead and apply it to stable as well?

Done.