[PATCH v3 3/4] can: kvaser_usb: Don't send a RESET_CHIP for non-existing channels
From: Ahmed S. Darwish <hidden>
Date: 2015-01-05 17:57:21
Also in:
linux-can, lkml
Subsystem:
can network drivers, the rest · Maintainers:
Marc Kleine-Budde, Vincent Mailhol, Linus Torvalds
From: Ahmed S. Darwish <redacted> Recent Leaf firmware versions (>= 3.1.557) do not allow to send commands for non-existing channels. If a command is sent for a non-existing channel, the firmware crashes. Reported-by: Christopher Storah <redacted> Signed-off-by: Ahmed S. Darwish <redacted> Signed-off-by: Olivier Sobrie <redacted> --- drivers/net/can/usb/kvaser_usb.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) ** V3 Changelog: - Update commit log message per Olivier remarks on v2
diff --git a/drivers/net/can/usb/kvaser_usb.c b/drivers/net/can/usb/kvaser_usb.c
index 9accc82..cc7bfc0 100644
--- a/drivers/net/can/usb/kvaser_usb.c
+++ b/drivers/net/can/usb/kvaser_usb.c@@ -1503,6 +1503,10 @@ static int kvaser_usb_init_one(struct usb_interface *intf, struct kvaser_usb_net_priv *priv; int i, err; + err = kvaser_usb_send_simple_msg(dev, CMD_RESET_CHIP, channel); + if (err) + return err; + netdev = alloc_candev(sizeof(*priv), MAX_TX_URBS); if (!netdev) { dev_err(&intf->dev, "Cannot alloc candev\n");
@@ -1607,9 +1611,6 @@ static int kvaser_usb_probe(struct usb_interface *intf, usb_set_intfdata(intf, dev); - for (i = 0; i < MAX_NET_DEVICES; i++) - kvaser_usb_send_simple_msg(dev, CMD_RESET_CHIP, i); - err = kvaser_usb_get_software_info(dev); if (err) { dev_err(&intf->dev,