[PATCH v3 9/9] ARM: dts: berlin: enable the Ethernet port on the BG2Q DMP

[PATCH v3 0/9] ARM: Berlin: Ethernet support · Antoine Tenart <hidden> · 2014-09-15
[PATCH v3 6/9] net: pxa168_eth: rework the MAC address setup · Antoine Tenart <hidden> · 2014-09-15
[PATCH v3 5/9] net: pxa168_eth: get and set the mac address on the Ethernet controller · Antoine Tenart <hidden> · 2014-09-15
Re: [PATCH v3 5/9] net: pxa168_eth: get and set the mac address on the Ethernet controller · David Miller <davem@davemloft.net> · 2014-09-15
[PATCH v3 9/9] ARM: dts: berlin: enable the Ethernet port on the BG2Q DMP · Antoine Tenart <hidden> · 2014-09-15
[PATCH v3 8/9] ARM: dts: berlin: add the Ethernet node · Antoine Tenart <hidden> · 2014-09-15
[PATCH v3 7/9] net: pxa168_eth: allow Berlin SoCs to use the pxa168_eth driver · Antoine Tenart <hidden> · 2014-09-15
[PATCH v3 4/9] net: pxa168_eth: fix Ethernet flow control status · Antoine Tenart <hidden> · 2014-09-15
[PATCH v3 3/9] Documentation: bindings: net: add the Marvell PXA168 Ethernet controller · Antoine Tenart <hidden> · 2014-09-15
[PATCH v3 2/9] net: pxa168_eth: add device tree support · Antoine Tenart <hidden> · 2014-09-15
[PATCH v3 1/9] net: pxa168_eth: clean up · Antoine Tenart <hidden> · 2014-09-15

STALE4289d

Revisions (4)

2014-09-15 v3 current
2014-09-23 v4 [diff vs current]
2014-09-26 v6 [diff vs current]
2014-09-30 v6 [diff vs current]

From: Antoine Tenart <hidden>
Date: 2014-09-15 14:02:47
Also in: linux-arm-kernel, linux-devicetree, lkml
Subsystem: the rest · Maintainer: Linus Torvalds

This patch enables the Ethernet port on the Marvell Berlin2Q DMP board.

Signed-off-by: Antoine Tenart <redacted>
---
 arch/arm/boot/dts/berlin2q-marvell-dmp.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
index a357ce02a64e..ea1f99b8eed6 100644
--- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
+++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts

@@ -45,3 +45,7 @@
 &uart0 {
 	status = "okay";
 };
+
+&eth0 {
+	status = "okay";
+};

-- 
1.9.1

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help