[PATCH v2 3/8] Documentation: bindings: net: add the Marvell PXA168 Ethernet controller
From: Antoine Tenart <hidden>
Date: 2014-09-09 14:46:22
Also in:
linux-arm-kernel, linux-devicetree, lkml
Subsystem:
networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
This adds the binding documentation for the Marvell PXA168 Ethernet controller, following its DT support. Signed-off-by: Antoine Tenart <redacted> --- .../devicetree/bindings/net/marvell-pxa168.txt | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/marvell-pxa168.txt
diff --git a/Documentation/devicetree/bindings/net/marvell-pxa168.txt b/Documentation/devicetree/bindings/net/marvell-pxa168.txt
new file mode 100644
index 000000000000..3a5320ad09a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/marvell-pxa168.txt@@ -0,0 +1,22 @@ +* Marvell PXA168 Ethernet Controller + +Required properties: +- compatible: should be "marvell,pxa168-eth". +- reg: address and length of the register set for the device. +- interrupts: interrupt for the device. +- clocks: pointer to the clock for the device. +- clock-names: should be "MFUCLK". + +Optional properties: +- port-id: should be '0','1' or '2'. +- phy-addr: MDIO address of the PHY. + +Example: + + eth0: ethernet@f7b90000 { + compatible = "marvell,pxa168-eth"; + reg = <0xf7b90000 0x10000>; + clocks = <&chip CLKID_GETH0>; + clock-names = "MFUCLK"; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + };
--
1.9.1