[PATCH 0/9] tlan: Link handling improvements and Olicom fixes

[PATCH 0/9] tlan: Link handling improvements and Olicom fixes · Ondrej Zary <hidden> · 2014-05-27
[PATCH 1/9] tlan: Enable activity LED on Olicom OC-2325 and OC-2326 · Ondrej Zary <hidden> · 2014-05-27
[PATCH 6/9] tlan: Don't scream if no link · Ondrej Zary <hidden> · 2014-05-27
[PATCH 8/9] tlan: Add PHY reset timeout · Ondrej Zary <hidden> · 2014-05-27
[PATCH 4/9] tlan: Fix MAC address byte order on OC-2325/OC-2326 · Ondrej Zary <hidden> · 2014-05-27
[PATCH 7/9] tlan: Make autonegotiation faster · Ondrej Zary <hidden> · 2014-05-27
Re: [PATCH 7/9] tlan: Make autonegotiation faster · Sergei Shtylyov <hidden> · 2014-05-28
[PATCH 9/9] tlan: Don't disable internal PHY on cards that use it in 10 Mbps mode · Ondrej Zary <hidden> · 2014-05-27
[PATCH 5/9] tlan: Restart autonegotiation on link loss · Ondrej Zary <hidden> · 2014-05-27
Re: [PATCH 5/9] tlan: Restart autonegotiation on link loss · Florian Fainelli <f.fainelli@gmail.com> · 2014-05-27
Re: [PATCH 5/9] tlan: Restart autonegotiation on link loss · Ondrej Zary <hidden> · 2014-05-28
Re: [PATCH 5/9] tlan: Restart autonegotiation on link loss · Florian Fainelli <f.fainelli@gmail.com> · 2014-05-28
Re: [PATCH 5/9] tlan: Restart autonegotiation on link loss · Sergei Shtylyov <hidden> · 2014-05-28
[PATCH 2/9] tlan: Enable link monitoring · Ondrej Zary <hidden> · 2014-05-27
[PATCH 3/9] tlan: Add ethtool support · Ondrej Zary <hidden> · 2014-05-27

STALE4399d

Revisions (3)

2014-05-27 v1 current
2014-06-21 v2 [diff vs current]
2014-06-30 v3 [diff vs current]

From: Ondrej Zary <hidden>
Date: 2014-05-27 21:42:33
Also in: lkml

This patch series improves link handling in tlan driver, allowing the
cable to be (un)plugged anytime and NetworkManager to work properly.

Also there are some bugfixes related to Olicom OC-2326 card.
But one bug remains: packet loss at 10 Mbps under load. As wireshark shows,
the card does not transmit some of the packets. Everything seems to be fine
from driver's view - can't figure out where the problem is.

-- 
Ondrej Zary

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help