[net-next 13/16] i40e: call clear_pxe after adminq is initialized
flat view
STALE4667d
SUPERSEDED: 1 (0M)
From: Jeff Kirsher <hidden>
Date: 2014-01-10 08:59:07
Subsystem:
intel ethernet drivers, networking drivers, the rest · Maintainers:
Tony Nguyen, Przemek Kitszel, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Revision v1 of 4 in this series; 1 review trailer.
Revisions (4)
- v1
- v1 current
- v2 [diff vs current]
- v3 [diff vs current]
From: Shannon Nelson <redacted> In the latest firmware the clear_pxe_mode function will use the AdminQ request, so call this after AdminQ is set up rather than relying on i40e_pf_reset() to clear the PXE mode. Change-ID: Ice8cba2e9cbc3c7bde0a0bcf8eaf5009abef040b Signed-off-by: Shannon Nelson <redacted> Signed-off-by: Jesse Brandeburg <redacted> Tested-by: Kavindya Deegala <redacted> Signed-off-by: Jeff Kirsher <redacted> --- drivers/net/ethernet/intel/i40e/i40e_main.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index bc14a85..182ed18 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c@@ -7612,6 +7612,7 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_pf_reset; } + i40e_clear_pxe_mode(hw); err = i40e_get_capabilities(pf); if (err) goto err_adminq_setup;
--
1.8.3.1