[RFC PATCH v3 linux-next] et131x: Promote staging et131x driver to drivers/net

@@ -3029,6 +3029,12 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git
 F:	drivers/video/s1d13xxxfb.c
 F:	include/video/s1d13xxxfb.h
 
+ET131X NETWORK DRIVER
+M:	Mark Einon <mark.einon@gmail.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	drivers/net/ethernet/agere
+
 ETHEREXPRESS-16 NETWORK DRIVER
 M:	Philip Blundell <philb@gnu.org>
 L:	netdev@vger.kernel.org

@@ -7473,11 +7479,6 @@ M:	David Rowe <david@rowetel.com>
 S:	Odd Fixes
 F:	drivers/staging/echo/
 
-STAGING - ET131X NETWORK DRIVER
-M:	Mark Einon <mark.einon@gmail.com>
-S:	Odd Fixes
-F:	drivers/staging/et131x/
-
 STAGING - FLARION FT1000 DRIVERS
 M:	Marek Belisko <marek.belisko@gmail.com>
 S:	Odd Fixes

@@ -20,6 +20,7 @@ config SUNGEM_PHY
 source "drivers/net/ethernet/3com/Kconfig"
 source "drivers/net/ethernet/adaptec/Kconfig"
 source "drivers/net/ethernet/aeroflex/Kconfig"
+source "drivers/net/ethernet/agere/Kconfig"
 source "drivers/net/ethernet/alteon/Kconfig"
 source "drivers/net/ethernet/amd/Kconfig"
 source "drivers/net/ethernet/apple/Kconfig"

@@ -6,6 +6,7 @@ obj-$(CONFIG_NET_VENDOR_3COM) += 3com/
 obj-$(CONFIG_NET_VENDOR_8390) += 8390/
 obj-$(CONFIG_NET_VENDOR_ADAPTEC) += adaptec/
 obj-$(CONFIG_GRETH) += aeroflex/
+obj-$(CONFIG_NET_VENDOR_AGERE) += agere/
 obj-$(CONFIG_NET_VENDOR_ALTEON) += alteon/
 obj-$(CONFIG_NET_VENDOR_AMD) += amd/
 obj-$(CONFIG_NET_VENDOR_APPLE) += apple/

@@ -0,0 +1,32 @@
+#
+# Agere device configuration
+#
+
+config NET_VENDOR_AGERE
+       bool "Agere devices"
+       default y
+       depends on PCI
+       ---help---
+         If you have a network (Ethernet) card belonging to this class, say Y
+         and read the Ethernet-HOWTO, available from
+         <http://www.tldp.org/docs.html#howto>.
+
+         Note that the answer to this question doesn't directly affect the
+         kernel: saying N will just cause the configurator to skip all
+         the questions about Agere devices. If you say Y, you will be asked
+         for your specific card in the following questions.
+
+if NET_VENDOR_AGERE
+
+config ET131X
+       tristate "Agere ET-1310 Gigabit Ethernet support"
+       depends on PCI
+       select PHYLIB
+       ---help---
+         This driver supports Agere ET-1310 ethernet adapters.
+
+         To compile this driver as a module, choose M here. The module
+         will be called et131x.
+
+endif # NET_VENDOR_AGERE
+

@@ -3,3 +3,4 @@
 #
 
 obj-$(CONFIG_ET131X) += et131x.o
+

@@ -24,8 +24,6 @@ menuconfig STAGING
 
 if STAGING
 
-source "drivers/staging/et131x/Kconfig"
-
 source "drivers/staging/slicoss/Kconfig"
 
 source "drivers/staging/usbip/Kconfig"

@@ -5,7 +5,6 @@ obj-$(CONFIG_STAGING)		+= staging.o
 
 obj-y				+= media/
 obj-y				+= net/
-obj-$(CONFIG_ET131X)		+= et131x/
 obj-$(CONFIG_SLICOSS)		+= slicoss/
 obj-$(CONFIG_USBIP_CORE)	+= usbip/
 obj-$(CONFIG_W35UND)		+= winbond/

@@ -1,10 +0,0 @@
-config ET131X
-	tristate "Agere ET-1310 Gigabit Ethernet support"
-	depends on PCI && NET && NETDEVICES
-	select PHYLIB
-	default n
-	---help---
-	  This driver supports Agere ET-1310 ethernet adapters.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called et131x.

@@ -1,16 +0,0 @@
-This is a driver for the ET1310 network device.
-
-Based on the driver found at https://sourceforge.net/projects/et131x/
-
-Cleaned up immensely by Olaf Hartman and Christoph Hellwig <hch@infradead.org>
-
-Note, the powermanagement options were removed from the vendor provided
-driver as they did not build properly at the time.
-
-TODO:
-	- some rx packets have CRC/code/frame errors
-
-Please send patches to:
-	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-	Mark Einon <mark.einon@gmail.com>
-