Thread (18 messages) 18 messages, 3 authors, 2013-01-28

[net-next 01/14] e1000e: cleanup: remove e1000_set_d0_lplu_state()

flat view
STALE5011d SUPERSEDED: 1 (0M)

From: Jeff Kirsher <hidden>
Date: 2013-01-28 09:04:34
Subsystem: intel ethernet drivers, networking drivers, the rest · Maintainers: Tony Nguyen, Przemek Kitszel, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds

Revision v1 of 227 in this series; 1 review trailer.

Revisions (227)
  1. v1
  2. v1
  3. v2 [diff vs current]
  4. v1
  5. v1
  6. v1
  7. v2 [diff vs current]
  8. v1
  9. v1
  10. v1
  11. v1
  12. v1
  13. v1
  14. v1
  15. v1
  16. v1
  17. v1
  18. v2 [diff vs current]
  19. v1
  20. v3 [diff vs current]
  21. v1
  22. v1
  23. v1
  24. v2 [diff vs current]
  25. v2 [diff vs current]
  26. v1
  27. v2 [diff vs current]
  28. v1
  29. v2 [diff vs current]
  30. v3 [diff vs current]
  31. v1
  32. v1
  33. v1
  34. v2 [diff vs current]
  35. v1
  36. v1
  37. v1
  38. v2 [diff vs current]
  39. v1
  40. v1
  41. v1
  42. v1
  43. v1
  44. v2 [diff vs current]
  45. v1
  46. v2 [diff vs current]
  47. v1
  48. v1
  49. v1
  50. v1
  51. v1
  52. v1
  53. v1
  54. v1
  55. v1
  56. v1
  57. v1
  58. v1
  59. v1
  60. v1
  61. v1
  62. v1
  63. v1
  64. v1
  65. v1
  66. v1
  67. v1
  68. v2 [diff vs current]
  69. v1
  70. v2 [diff vs current]
  71. v1
  72. v1
  73. v2 [diff vs current]
  74. v1
  75. v1
  76. v1
  77. v2 [diff vs current]
  78. v3 [diff vs current]
  79. v1
  80. v2 [diff vs current]
  81. v1
  82. v1
  83. v1
  84. v1
  85. v1
  86. v1
  87. v1
  88. v1
  89. v1
  90. v1
  91. v1
  92. v1
  93. v1
  94. v1
  95. v1
  96. v1
  97. v1
  98. v1
  99. v1
  100. v1
  101. v1
  102. v2 [diff vs current]
  103. v1
  104. v1
  105. v1
  106. v1
  107. v1
  108. v1
  109. v1
  110. v1
  111. v1
  112. v2 [diff vs current]
  113. v1
  114. v1
  115. v1
  116. v1
  117. v1
  118. v2 [diff vs current]
  119. v1
  120. v1
  121. v1
  122. v1
  123. v1
  124. v2 [diff vs current]
  125. v1
  126. v2 [diff vs current]
  127. v1
  128. v1
  129. v1 current
  130. v1
  131. v1
  132. v1
  133. v1
  134. v1
  135. v1
  136. v1
  137. v1
  138. v1
  139. v2 [diff vs current]
  140. v1
  141. v1
  142. v2 [diff vs current]
  143. v1
  144. v1
  145. v1
  146. v1
  147. v1
  148. v1
  149. v2 [diff vs current]
  150. v1
  151. v2 [diff vs current]
  152. v2 [diff vs current]
  153. v1
  154. v2 [diff vs current]
  155. v3 [diff vs current]
  156. v1
  157. v4 [diff vs current]
  158. v1
  159. v5 [diff vs current]
  160. v6 [diff vs current]
  161. v7 [diff vs current]
  162. v1
  163. v1
  164. v2 [diff vs current]
  165. v1
  166. v1
  167. v1
  168. v2 [diff vs current]
  169. v1
  170. v1
  171. v1
  172. v1
  173. v1
  174. v2 [diff vs current]
  175. v1
  176. v1
  177. v1
  178. v1
  179. v2 [diff vs current]
  180. v1
  181. v1
  182. v1
  183. v2 [diff vs current]
  184. v3 [diff vs current]
  185. v4 [diff vs current]
  186. v1
  187. v1
  188. v2 [diff vs current]
  189. v5 [diff vs current]
  190. v1
  191. v1
  192. v1
  193. v2 [diff vs current]
  194. v1
  195. v1
  196. v2 [diff vs current]
  197. v3 [diff vs current]
  198. v1
  199. v2 [diff vs current]
  200. v1
  201. v1
  202. v2 [diff vs current]
  203. v1
  204. v2 [diff vs current]
  205. v1
  206. v2 [diff vs current]
  207. v3 [diff vs current]
  208. v1
  209. v1
  210. v1
  211. v2 [diff vs current]
  212. v1
  213. v1
  214. v1
  215. v1
  216. v1
  217. v1
  218. v2 [diff vs current]
  219. v1
  220. v1
  221. v1
  222. v1
  223. v2 [diff vs current]
  224. v1
  225. v1
  226. v1
  227. v2 [diff vs current] 
From: Bruce Allan <redacted>

Replace the function e1000_set_d0_lplu_state() with the contents of it
coded in place of the single call to the function.

Signed-off-by: Bruce Allan <redacted>
Tested-by: Aaron Brown <redacted>
Signed-off-by: Jeff Kirsher <redacted>
---
 drivers/net/ethernet/intel/e1000e/phy.c | 33 ++++++---------------------------
 1 file changed, 6 insertions(+), 27 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c
index 44fb432..73d7813 100644
--- a/drivers/net/ethernet/intel/e1000e/phy.c
+++ b/drivers/net/ethernet/intel/e1000e/phy.c
@@ -30,7 +30,6 @@
 
 static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw);
 static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw);
-static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active);
 static s32 e1000_wait_autoneg(struct e1000_hw *hw);
 static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
 					  u16 *data, bool read, bool page_set);
@@ -894,10 +893,12 @@ s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw)
 	msleep(100);
 
 	/* disable lplu d0 during driver init */
-	ret_val = e1000_set_d0_lplu_state(hw, false);
-	if (ret_val) {
-		e_dbg("Error Disabling LPLU D0\n");
-		return ret_val;
+	if (hw->phy.ops.set_d0_lplu_state) {
+		ret_val = hw->phy.ops.set_d0_lplu_state(hw, false);
+		if (ret_val) {
+			e_dbg("Error Disabling LPLU D0\n");
+			return ret_val;
+		}
 	}
 	/* Configure mdi-mdix settings */
 	ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CTRL, &data);
@@ -2820,28 +2821,6 @@ s32 e1000e_commit_phy(struct e1000_hw *hw)
 }
 
 /**
- *  e1000_set_d0_lplu_state - Sets low power link up state for D0
- *  @hw: pointer to the HW structure
- *  @active: boolean used to enable/disable lplu
- *
- *  Success returns 0, Failure returns 1
- *
- *  The low power link up (lplu) state is set to the power management level D0
- *  and SmartSpeed is disabled when active is true, else clear lplu for D0
- *  and enable Smartspeed.  LPLU and Smartspeed are mutually exclusive.  LPLU
- *  is used during Dx states where the power conservation is most important.
- *  During driver activity, SmartSpeed should be enabled so performance is
- *  maintained.  This is a function pointer entry point called by drivers.
- **/
-static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active)
-{
-	if (hw->phy.ops.set_d0_lplu_state)
-		return hw->phy.ops.set_d0_lplu_state(hw, active);
-
-	return 0;
-}
-
-/**
  *  __e1000_read_phy_reg_hv -  Read HV PHY register
  *  @hw: pointer to the HW structure
  *  @offset: register offset to be read
-- 
1.7.11.7
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help