Thread (12 messages) 12 messages, 2 authors, 2012-03-01

[net-next 01/10] e100: Support RXFCS feature flag.

flat view
STALE5344d SUPERSEDED: 1 (0M)

From: Jeff Kirsher <hidden>
Date: 2012-03-01 07:33:13
Subsystem: intel ethernet drivers, networking drivers, the rest · Maintainers: Tony Nguyen, Przemek Kitszel, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds

Revision v1 of 227 in this series; 1 review trailer.

Revisions (227)
  1. v1
  2. v1
  3. v2 [diff vs current]
  4. v1
  5. v1
  6. v1
  7. v2 [diff vs current]
  8. v1
  9. v1
  10. v1
  11. v1
  12. v1
  13. v1
  14. v1
  15. v1
  16. v1
  17. v1
  18. v2 [diff vs current]
  19. v1
  20. v3 [diff vs current]
  21. v1
  22. v1
  23. v1
  24. v2 [diff vs current]
  25. v2 [diff vs current]
  26. v1
  27. v2 [diff vs current]
  28. v1
  29. v2 [diff vs current]
  30. v3 [diff vs current]
  31. v1
  32. v1
  33. v1
  34. v2 [diff vs current]
  35. v1
  36. v1
  37. v1
  38. v2 [diff vs current]
  39. v1
  40. v1
  41. v1
  42. v1
  43. v1
  44. v2 [diff vs current]
  45. v1
  46. v2 [diff vs current]
  47. v1
  48. v1
  49. v1
  50. v1
  51. v1 current
  52. v1
  53. v1
  54. v1
  55. v1
  56. v1
  57. v1
  58. v1
  59. v1
  60. v1
  61. v1
  62. v1
  63. v1
  64. v1
  65. v1
  66. v1
  67. v1
  68. v2 [diff vs current]
  69. v1
  70. v2 [diff vs current]
  71. v1
  72. v1
  73. v2 [diff vs current]
  74. v1
  75. v1
  76. v1
  77. v2 [diff vs current]
  78. v3 [diff vs current]
  79. v1
  80. v2 [diff vs current]
  81. v1
  82. v1
  83. v1
  84. v1
  85. v1
  86. v1
  87. v1
  88. v1
  89. v1
  90. v1
  91. v1
  92. v1
  93. v1
  94. v1
  95. v1
  96. v1
  97. v1
  98. v1
  99. v1
  100. v1
  101. v1
  102. v2 [diff vs current]
  103. v1
  104. v1
  105. v1
  106. v1
  107. v1
  108. v1
  109. v1
  110. v1
  111. v1
  112. v2 [diff vs current]
  113. v1
  114. v1
  115. v1
  116. v1
  117. v1
  118. v2 [diff vs current]
  119. v1
  120. v1
  121. v1
  122. v1
  123. v1
  124. v2 [diff vs current]
  125. v1
  126. v2 [diff vs current]
  127. v1
  128. v1
  129. v1
  130. v1
  131. v1
  132. v1
  133. v1
  134. v1
  135. v1
  136. v1
  137. v1
  138. v1
  139. v2 [diff vs current]
  140. v1
  141. v1
  142. v2 [diff vs current]
  143. v1
  144. v1
  145. v1
  146. v1
  147. v1
  148. v1
  149. v2 [diff vs current]
  150. v1
  151. v2 [diff vs current]
  152. v2 [diff vs current]
  153. v1
  154. v2 [diff vs current]
  155. v3 [diff vs current]
  156. v1
  157. v4 [diff vs current]
  158. v1
  159. v5 [diff vs current]
  160. v6 [diff vs current]
  161. v7 [diff vs current]
  162. v1
  163. v1
  164. v2 [diff vs current]
  165. v1
  166. v1
  167. v1
  168. v2 [diff vs current]
  169. v1
  170. v1
  171. v1
  172. v1
  173. v1
  174. v2 [diff vs current]
  175. v1
  176. v1
  177. v1
  178. v1
  179. v2 [diff vs current]
  180. v1
  181. v1
  182. v1
  183. v2 [diff vs current]
  184. v3 [diff vs current]
  185. v4 [diff vs current]
  186. v1
  187. v1
  188. v2 [diff vs current]
  189. v5 [diff vs current]
  190. v1
  191. v1
  192. v1
  193. v2 [diff vs current]
  194. v1
  195. v1
  196. v2 [diff vs current]
  197. v3 [diff vs current]
  198. v1
  199. v2 [diff vs current]
  200. v1
  201. v1
  202. v2 [diff vs current]
  203. v1
  204. v2 [diff vs current]
  205. v1
  206. v2 [diff vs current]
  207. v3 [diff vs current]
  208. v1
  209. v1
  210. v1
  211. v2 [diff vs current]
  212. v1
  213. v1
  214. v1
  215. v1
  216. v1
  217. v1
  218. v2 [diff vs current]
  219. v1
  220. v1
  221. v1
  222. v1
  223. v2 [diff vs current]
  224. v1
  225. v1
  226. v1
  227. v2 [diff vs current]
From: Ben Greear <redacted>

This allows e100 to be configured to append the
Ethernet FCS to the skb.

Useful for sniffing networks.

Signed-off-by: Ben Greear <redacted>
Tested-by: Aaron Brown <redacted>
Signed-off-by: Jeff Kirsher <redacted>
---
 drivers/net/ethernet/intel/e100.c |   35 ++++++++++++++++++++++++++++++-----
 1 files changed, 30 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c
index 485ab8c..3ecbded 100644
--- a/drivers/net/ethernet/intel/e100.c
+++ b/drivers/net/ethernet/intel/e100.c
@@ -1075,7 +1075,7 @@ static void e100_get_defaults(struct nic *nic)
 	/* Template for a freshly allocated RFD */
 	nic->blank_rfd.command = 0;
 	nic->blank_rfd.rbd = cpu_to_le32(0xFFFFFFFF);
-	nic->blank_rfd.size = cpu_to_le16(VLAN_ETH_FRAME_LEN);
+	nic->blank_rfd.size = cpu_to_le16(VLAN_ETH_FRAME_LEN + ETH_FCS_LEN);
 
 	/* MII setup */
 	nic->mii.phy_id_mask = 0x1F;
@@ -1089,6 +1089,7 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
 {
 	struct config *config = &cb->u.config;
 	u8 *c = (u8 *)config;
+	struct net_device *netdev = nic->netdev;
 
 	cb->command = cpu_to_le16(cb_config);
 
@@ -1132,6 +1133,9 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
 		config->promiscuous_mode = 0x1;		/* 1=on, 0=off */
 	}
 
+	if (unlikely(netdev->features & NETIF_F_RXFCS))
+		config->rx_crc_transfer = 0x1;	/* 1=save, 0=discard */
+
 	if (nic->flags & multicast_all)
 		config->multicast_all = 0x1;		/* 1=accept, 0=no */
 
@@ -1881,7 +1885,7 @@ static inline void e100_start_receiver(struct nic *nic, struct rx *rx)
 	}
 }
 
-#define RFD_BUF_LEN (sizeof(struct rfd) + VLAN_ETH_FRAME_LEN)
+#define RFD_BUF_LEN (sizeof(struct rfd) + VLAN_ETH_FRAME_LEN + ETH_FCS_LEN)
 static int e100_rx_alloc_skb(struct nic *nic, struct rx *rx)
 {
 	if (!(rx->skb = netdev_alloc_skb_ip_align(nic->netdev, RFD_BUF_LEN)))
@@ -1919,6 +1923,7 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx,
 	struct sk_buff *skb = rx->skb;
 	struct rfd *rfd = (struct rfd *)skb->data;
 	u16 rfd_status, actual_size;
+	u16 fcs_pad = 0;
 
 	if (unlikely(work_done && *work_done >= work_to_do))
 		return -EAGAIN;
@@ -1951,6 +1956,8 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx,
 	}
 
 	/* Get actual data size */
+	if (unlikely(dev->features & NETIF_F_RXFCS))
+		fcs_pad = 4;
 	actual_size = le16_to_cpu(rfd->actual_size) & 0x3FFF;
 	if (unlikely(actual_size > RFD_BUF_LEN - sizeof(struct rfd)))
 		actual_size = RFD_BUF_LEN - sizeof(struct rfd);
@@ -1980,13 +1987,13 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx,
 	if (unlikely(!(rfd_status & cb_ok))) {
 		/* Don't indicate if hardware indicates errors */
 		dev_kfree_skb_any(skb);
-	} else if (actual_size > ETH_DATA_LEN + VLAN_ETH_HLEN) {
+	} else if (actual_size > ETH_DATA_LEN + VLAN_ETH_HLEN + fcs_pad) {
 		/* Don't indicate oversized frames */
 		nic->rx_over_length_errors++;
 		dev_kfree_skb_any(skb);
 	} else {
 		dev->stats.rx_packets++;
-		dev->stats.rx_bytes += actual_size;
+		dev->stats.rx_bytes += (actual_size - fcs_pad);
 		netif_receive_skb(skb);
 		if (work_done)
 			(*work_done)++;
@@ -2058,7 +2065,8 @@ static void e100_rx_clean(struct nic *nic, unsigned int *work_done,
 		pci_dma_sync_single_for_device(nic->pdev,
 			old_before_last_rx->dma_addr, sizeof(struct rfd),
 			PCI_DMA_BIDIRECTIONAL);
-		old_before_last_rfd->size = cpu_to_le16(VLAN_ETH_FRAME_LEN);
+		old_before_last_rfd->size = cpu_to_le16(VLAN_ETH_FRAME_LEN
+							+ ETH_FCS_LEN);
 		pci_dma_sync_single_for_device(nic->pdev,
 			old_before_last_rx->dma_addr, sizeof(struct rfd),
 			PCI_DMA_BIDIRECTIONAL);
@@ -2729,6 +2737,20 @@ static int e100_close(struct net_device *netdev)
 	return 0;
 }
 
+static int e100_set_features(struct net_device *netdev,
+			     netdev_features_t features)
+{
+	struct nic *nic = netdev_priv(netdev);
+	netdev_features_t changed = features ^ netdev->features;
+
+	if (!(changed & (NETIF_F_RXFCS)))
+		return 0;
+
+	netdev->features = features;
+	e100_exec_cb(nic, NULL, e100_configure);
+	return 0;
+}
+
 static const struct net_device_ops e100_netdev_ops = {
 	.ndo_open		= e100_open,
 	.ndo_stop		= e100_close,
@@ -2742,6 +2764,7 @@ static const struct net_device_ops e100_netdev_ops = {
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= e100_netpoll,
 #endif
+	.ndo_set_features	= e100_set_features,
 };
 
 static int __devinit e100_probe(struct pci_dev *pdev,
@@ -2754,6 +2777,8 @@ static int __devinit e100_probe(struct pci_dev *pdev,
 	if (!(netdev = alloc_etherdev(sizeof(struct nic))))
 		return -ENOMEM;
 
+	netdev->hw_features |= NETIF_F_RXFCS;
+
 	netdev->netdev_ops = &e100_netdev_ops;
 	SET_ETHTOOL_OPS(netdev, &e100_ethtool_ops);
 	netdev->watchdog_timeo = E100_WATCHDOG_PERIOD;
-- 
1.7.7.6
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help