[PATCH net-next 8/9] bnx2x: Add warning message in case of non-10G SFP module
From: Yaniv Rosner <hidden>
Date: 2012-11-27 11:47:32
Subsystem:
broadcom bnx2x 10 gigabit ethernet driver, networking drivers, the rest · Maintainers:
Sudarsana Kalluru, Manish Chopra, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
The string was split to several lines since it reached over 180 chars, which seems too much. Signed-off-by: Yaniv Rosner <redacted> Signed-off-by: Eilon Greenstein <redacted> --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 10 ++++++++-- 1 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index 661d3ea..ebab35d 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c@@ -7986,9 +7986,8 @@ static int bnx2x_get_edc_mode(struct bnx2x_phy *phy, { struct bnx2x *bp = params->bp; u32 sync_offset = 0, phy_idx, media_types; - u8 val[2], check_limiting_mode = 0; + u8 gport, val[2], check_limiting_mode = 0; *edc_mode = EDC_MODE_LIMITING; - phy->media_type = ETH_PHY_UNSPECIFIED; /* First check for copper cable */ if (bnx2x_read_sfp_module_eeprom(phy,
@@ -8043,8 +8042,15 @@ static int bnx2x_get_edc_mode(struct bnx2x_phy *phy, SFP_EEPROM_COMP_CODE_LR_MASK | SFP_EEPROM_COMP_CODE_LRM_MASK)) == 0) { DP(NETIF_MSG_LINK, "1G Optic module detected\n"); + gport = params->port; phy->media_type = ETH_PHY_SFP_1G_FIBER; phy->req_line_speed = SPEED_1000; + if (!CHIP_IS_E1x(bp)) + gport = BP_PATH(bp) + (params->port << 1); + netdev_err(bp->dev, "Warning: Link speed was forced to 1000Mbps." + " Current SFP module in port %d is not" + " compliant with 10G Ethernet\n", + gport); } else { int idx, cfg_idx = 0; DP(NETIF_MSG_LINK, "10G Optic module detected\n");
--
1.7.1