Re: 3.7-rc3 oops on reboot

On Mon, Oct 29, 2012 at 12:41 PM, Roland Stigge [off-list ref] wrote:

On 10/29/2012 02:51 PM, Alexandre Pereira da Silva wrote:

quoted

quoted

I just tried both on a PHY3250 reference machine, and on a custom board
and couldn't reproduce sth. like this. Booted the kernel and connected
the ethernet cable later on, as well as with cable connected on boot.

This is happening on my custom board. I didn't try this on the
reference board yet.

quoted

Any related patches applied? Can you reproduce this on a reference
machine? Can you provide a .config for this? Any more detail about how
this could be reproduced?

No patches applied. I'm trying to bisect this. This happens on a clean
-rc1 as well. Doesn't happen on v3.6.

Attached my .config

To reproduce this, I am just running "reboot". I have the ethernet
cable always connected here.

Just tried this with your .config on the PHY3250 (w/o your initrd
thought) but couldn't reproduce the issue.

Maybe it's related to your Micrel ethernet PHY (activated in your
config) which I don't have hardware for?

Otherwise, we would need to have a look at your devicetree.

Thanks for testing. I will investigate this further to see if I can
narrow source of the problem.