[PATCH net-next v2 0/8] ibmveth: fix hangs, use-after-frees and netpoll races

Hi,

Eight fixes for serious bugs in the ibmveth driver: two hang the
system, four are use-after-frees, one corrupts memory, and one makes
ethtool -L report success when it failed.

The series is based on net-next cfb7793d1bc0 ("Merge branch
'net-lan966x-add-support-for-pcie-fdma'"). It does not depend on
the two open() error-path fixes recently applied to net
(af0524bf4ce1, 84bec0bf0352) and merges cleanly with them; patch 2
explains how it relates to them. It also applies to net with
git am -3.

  1. Netpoll races with RX replenish (memory corruption, NULL
     dereference): remove ndo_poll_controller, as was done for
     ibmvnic, skip RX replenish in netpoll's budget-0 poll, and
     enable NAPI only once the RX resources exist.
     Fixes: 6b4223748895, bea3348eef27

  2. Hang after a failed internal reopen: the next close() waits in
     napi_disable() forever with RTNL held, and only a reboot
     recovers. Skip close() when open() did not succeed.
     Fixes: 860f242eb534

  3. Use-after-free in remove(): a reset queued from NAPI could run
     on the freed adapter. Disable the reset work first.
     Fixes: 2c91e2319ed9

  4. RX poll hang on a bad correlator: poll restarts on the same slot
     until RCU stalls, and an inactive pool dereferences NULL. Step
     past the slot, reject inactive pools, count the drop.
     Fixes: 2c91e2319ed9, 860f242eb534

  5. Use-after-free after a failed probe: the pool kobjects stay in
     sysfs after the adapter is freed. Put them, as remove() does,
     and give them a release() that probe and remove() wait for, so
     CONFIG_DEBUG_KOBJECT_RELEASE cannot free them early either.
     Fixes: 860f242eb534

  6. ethtool -L returns 0 when it cannot allocate the new TX queues.
     Return the allocation error.
     Fixes: 10c2aba89cc0

  7. Use-after-free of TX buffers: close() frees them without
     waiting for a running transmit. It is called directly for MTU,
     offload and buffer pool changes, and through dev_close(), which
     does not wait either with a noqueue qdisc. Use
     netif_tx_disable().
     Fixes: d6832ca48d8a

  8. Use-after-free of the RX queue: napi_disable() returns before
     the poll has finished, and the rest of the poll re-enables the
     interrupt and reads the RX queue that close() then frees. Wait
     with synchronize_net().
     Fixes: bea3348eef27

The triggers are rare and there are no field reports, so the series
targets net-next. All carry Fixes: tags; I am happy to repost
against net, or add Cc: stable, if you prefer.

All were found by AI-assisted review of the ibmveth multi-queue
RX series [1]. Landing them first also shrinks that series, which
then only extends this handling per queue.

Testing: the new and extended KUnit cases in patch 4 fail on the
unfixed driver and pass on qemu pseries (ppc64le). On a POWER10
LPAR: netconsole under printk and ping floods, MTU and buffer pool
changes under traffic, a forced open() failure followed by down and
up, unbind/bind under traffic, a forced register_netdev() failure in
probe, ethtool -L with a forced TX buffer allocation failure, and
rapid link down/up and MTU cycles under a ping flood for patch 8.
The forced failures used test-only module parameters that are not
part of this series.

Changes in v2:

From the Sashiko review of v1:
- Patch 5: give the pool kobjects a release() and wait for it before
  free_netdev() in probe and remove(), which closes the
  CONFIG_DEBUG_KOBJECT_RELEASE window.
- New patch 8: wait for the poll to return before close() frees the
  RX queue (raised on patch 1 as a pre-existing bug).

Other small changes:
- Patch 1: also skip RX replenish in netpoll's budget-0 poll.
- Patch 4: count rx_dropped when recycling an invalid buffer fails.
- Commit messages: say how each bug was found and tested, with small
  clarifications in patches 2 and 7.

Rebased on current net-next.

v1: https://lore.kernel.org/netdev/cover.1790991039.git.mmc@linux.ibm.com/ (local)

[1] https://lore.kernel.org/netdev/cover.1790319558.git.mmc@linux.ibm.com/ (local)

Thanks,
Mingming

Mingming Cao (8):
  ibmveth: fix netpoll races with RX replenish
  ibmveth: do not close twice after a failed reopen
  ibmveth: disable the reset work before unregister in remove
  ibmveth: step past bad RX correlators instead of spinning or oopsing
  ibmveth: release the pool kobjects when probe fails
  ibmveth: return the error when set_channels cannot add TX queues
  ibmveth: wait for in-flight transmits in ibmveth_close()
  ibmveth: wait for the RX poll to return before freeing the RX queue

 drivers/net/ethernet/ibm/ibmveth.c | 294 +++++++++++++++++++++++------
 drivers/net/ethernet/ibm/ibmveth.h |   5 +
 2 files changed, 237 insertions(+), 62 deletions(-)

-- 
2.39.3 (Apple Git-146)