[PATCH 06/10] net/macb: better manage tx errors

@@ -44,6 +44,10 @@
 
 #define MACB_RX_INT_FLAGS	(MACB_BIT(RCOMP) | MACB_BIT(RXUBR)	\
 				 | MACB_BIT(ISR_ROVR))
+#define MACB_TX_INT_FLAGS	(MACB_BIT(ISR_TUND)			\
+					| MACB_BIT(ISR_RLE)		\
+					| MACB_BIT(TXERR)		\
+					| MACB_BIT(TCOMP))
 
 /* Ring buffer accessors */
 static unsigned int macb_tx_ring_wrap(unsigned int index)

@@ -338,66 +342,56 @@ static void macb_update_stats(struct macb *bp)
 		*p += __raw_readl(reg);
 }
 
-static void macb_tx(struct macb *bp)
+static void macb_handle_tx_error(struct macb *bp, unsigned int err_tail, u32 ctrl)
 {
-	unsigned int tail;
-	unsigned int head;
-	u32 status;
-
-	status = macb_readl(bp, TSR);
-	macb_writel(bp, TSR, status);
+	struct macb_tx_skb	*tx_skb;
+	struct sk_buff		*skb;
+	unsigned int		head = bp->tx_head;
 
-	netdev_vdbg(bp->dev, "macb_tx status = %02lx\n", (unsigned long)status);
+	netdev_dbg(bp->dev, "TX error: ctrl 0x%08x, head %u, error tail %u\n",
+		   ctrl, head, err_tail);
 
-	if (status & (MACB_BIT(UND) | MACB_BIT(TSR_RLE))) {
-		int i;
-		netdev_err(bp->dev, "TX %s, resetting buffers\n",
-			   status & MACB_BIT(UND) ?
-			   "underrun" : "retry limit exceeded");
-
-		/* Transfer ongoing, disable transmitter, to avoid confusion */
-		if (status & MACB_BIT(TGO))
-			macb_writel(bp, NCR, macb_readl(bp, NCR) & ~MACB_BIT(TE));
-
-		head = bp->tx_head;
-
-		/*Mark all the buffer as used to avoid sending a lost buffer*/
-		for (i = 0; i < TX_RING_SIZE; i++)
-			bp->tx_ring[i].ctrl = MACB_BIT(TX_USED);
-
-		/* Add wrap bit */
-		bp->tx_ring[TX_RING_SIZE - 1].ctrl |= MACB_BIT(TX_WRAP);
+	/*
+	 * "Buffers exhausted mid-frame" errors may only happen if the
+	 * driver is buggy, so complain loudly about those. Statistics
+	 * are updated by hardware.
+	 */
+	if (ctrl & MACB_BIT(TX_BUF_EXHAUSTED))
+		netdev_err(bp->dev, "BUG: TX buffers exhausted mid-frame\n");
 
-		/* free transmit buffer in upper layer*/
-		for (tail = bp->tx_tail; tail != head; tail++) {
-			struct macb_tx_skb	*tx_skb;
-			struct sk_buff		*skb;
+	/*
+	 * Drop the frames that caused the error plus all remaining in queue.
+	 * Free transmit buffers in upper layer.
+	 */
+	for (; err_tail != head; err_tail++) {
+		struct macb_dma_desc	*desc;
 
-			rmb();
+		tx_skb = macb_tx_skb(bp, err_tail);
+		skb = tx_skb->skb;
+		dma_unmap_single(&bp->pdev->dev, tx_skb->mapping, skb->len,
+				 DMA_TO_DEVICE);
+		dev_kfree_skb_irq(skb);
+		tx_skb->skb = NULL;
 
-			tx_skb = macb_tx_skb(bp, tail);
-			skb = tx_skb->skb;
+		desc = macb_tx_desc(bp, err_tail);
+		desc->ctrl |= MACB_BIT(TX_USED);
+	}
 
-			dma_unmap_single(&bp->pdev->dev, tx_skb->mapping,
-						skb->len, DMA_TO_DEVICE);
-			tx_skb->skb = NULL;
-			dev_kfree_skb_irq(skb);
-		}
+	/* Make descriptor updates visible to hardware */
+	wmb();
+}
 
-		bp->tx_head = bp->tx_tail = 0;
+static void macb_tx_interrupt(struct macb *bp)
+{
+	unsigned int tail;
+	unsigned int head;
+	u32 status;
 
-		/* Enable the transmitter again */
-		if (status & MACB_BIT(TGO))
-			macb_writel(bp, NCR, macb_readl(bp, NCR) | MACB_BIT(TE));
-	}
+	status = macb_readl(bp, TSR);
+	macb_writel(bp, TSR, status);
 
-	if (!(status & MACB_BIT(COMP)))
-		/*
-		 * This may happen when a buffer becomes complete
-		 * between reading the ISR and scanning the
-		 * descriptors.  Nothing to worry about.
-		 */
-		return;
+	netdev_vdbg(bp->dev, "macb_tx_interrupt status = %02lx\n",
+		(unsigned long)status);
 
 	head = bp->tx_head;
 	for (tail = bp->tx_tail; tail != head; tail++) {

@@ -413,6 +407,31 @@ static void macb_tx(struct macb *bp)
 
 		ctrl = desc->ctrl;
 
+		if (unlikely(ctrl & (MACB_BIT(TX_ERROR)
+					| MACB_BIT(TX_UNDERRUN)
+					| MACB_BIT(TX_BUF_EXHAUSTED)))) {
+			/*
+			 * In case of transfer ongoing, disable transmitter.
+			 * Should already be the case due to hardware,
+			 * but make sure to avoid confusion.
+			 */
+			if (status & MACB_BIT(TGO))
+				macb_writel(bp, NCR, macb_readl(bp, NCR) & ~MACB_BIT(TE));
+
+			/*
+			 * An error should always stop the queue from advancing.
+			 * reset entries in the ring and exit from the loop.
+			 */
+			macb_handle_tx_error(bp, tail, ctrl);
+			bp->tx_head = bp->tx_tail = head = tail = 0;
+
+			/* Enable the transmitter again, start TX will be done elsewhere */
+			if (status & MACB_BIT(TGO))
+				macb_writel(bp, NCR, macb_readl(bp, NCR) | MACB_BIT(TE));
+
+			break;
+		}
+
 		if (!(ctrl & MACB_BIT(TX_USED)))
 			break;
 

@@ -644,9 +663,8 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id)
 			}
 		}
 
-		if (status & (MACB_BIT(TCOMP) | MACB_BIT(ISR_TUND) |
-			    MACB_BIT(ISR_RLE)))
-			macb_tx(bp);
+		if (status & MACB_TX_INT_FLAGS)
+			macb_tx_interrupt(bp);
 
 		/*
 		 * Link change detection isn't possible with RMII, so we'll