[net PATCH v2 5/7] bnx2x: correct advertisement of pause capabilities
From: Yuval Mintz <hidden>
Date: 2012-09-11 14:58:42
Subsystem:
broadcom bnx2x 10 gigabit ethernet driver, networking drivers, the rest · Maintainers:
Sudarsana Kalluru, Manish Chopra, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Yaniv Rosner <redacted> This patch propagates users' requested flow-control into the link layer, which will later be used to advertise this flow-control for auto-negotiation (until now these values were ignored). Signed-off-by: Yaniv Rosner <redacted> Signed-off-by: Yuval Mintz <redacted> Signed-off-by: Eilon Greenstein <redacted> --- .../net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
index c37a68d..bbf4cf0 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c@@ -1587,6 +1587,12 @@ static int bnx2x_set_pauseparam(struct net_device *dev, bp->link_params.req_flow_ctrl[cfg_idx] = BNX2X_FLOW_CTRL_AUTO; } + bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_NONE; + if (epause->rx_pause) + bp->link_params.req_fc_auto_adv |= BNX2X_FLOW_CTRL_RX; + + if (epause->tx_pause) + bp->link_params.req_fc_auto_adv |= BNX2X_FLOW_CTRL_TX; } DP(BNX2X_MSG_ETHTOOL,
--
1.7.9.rc2