[PATCH 1/1] atl1c: fix issue of transmit queue 0 timed out

From: xiong <redacted>

some people report atl1c could cause system hang with following
kernel trace info:
---------------------------------------
WARNING: at.../net/sched/sch_generic.c:258
dev_watchdog+0x1db/0x1d0()
...
NETDEV WATCHDOG: eth0 (atl1c): transmit queue 0 timed out
...
---------------------------------------
This is caused by netif_stop_queue calling when cable Link is down
but netif_wake_queue isn't called when cable Link is resume.

Signed-off-by: xiong <redacted>
Signed-off-by: Cloud Ren <redacted>
---
 drivers/net/ethernet/atheros/atl1c/atl1c_main.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
index 85717cb..c2736c4 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c

@@ -351,6 +351,8 @@ static void atl1c_common_task(struct work_struct *work)
 		atl1c_irq_disable(adapter);
 		atl1c_check_link_status(adapter);
 		atl1c_irq_enable(adapter);
+		if (netif_queue_stopped(netdev) && netif_carrier_ok(netdev))
+			netif_wake_queue(netdev);
 	}
 }
 

-- 
1.7.7