[PATCH v5 0/2] Adding new TI Common Platform ethernet SWitch driver
flat view
STALE5315d
From: Mugunthan V N <hidden>
Date: 2012-03-19 06:18:02
Revision v5 of 5 in this series.
Revisions (5)
The following series contains driver implementation for TI Common Platform ethernet SWitch (CPSW) driver. CPSW is found in following SoC. * AM335X - http://www.ti.com/litv/pdf/spruh73c * DM814X - http://www.ti.com/litv/pdf/sprugz8 CPSW: The three port switch gigabit ethernet subsystem provides ethernet packet communication and can be configured as an ethernet switch. It supports 10/100/1000 Mbps. It provides the gigabit media independent interface (G/MII), reduced gigabit media independent interface (RGMII), reduced media independent interface (RMII), the management data input output (MDIO) for physical layer device (PHY) management. Changes from v4: * Handled Kzalloc failure in cpsw_ale_create * Removed pr_fmt as it is not used in driver * removed "cpsw" prefix as it is not required Mugunthan V N (2): netdev: driver: ethernet: add cpsw address lookup engine support netdev: driver: ethernet: Add TI CPSW driver drivers/net/ethernet/ti/Kconfig | 11 + drivers/net/ethernet/ti/Makefile | 2 + drivers/net/ethernet/ti/cpsw.c | 1018 ++++++++++++++++++++++++++++++++++++ drivers/net/ethernet/ti/cpsw_ale.c | 641 +++++++++++++++++++++++ drivers/net/ethernet/ti/cpsw_ale.h | 93 ++++ include/linux/platform_data/cpsw.h | 55 ++ 6 files changed, 1820 insertions(+), 0 deletions(-) create mode 100644 drivers/net/ethernet/ti/cpsw.c create mode 100644 drivers/net/ethernet/ti/cpsw_ale.c create mode 100644 drivers/net/ethernet/ti/cpsw_ale.h create mode 100644 include/linux/platform_data/cpsw.h