Re: [PATCH 0/4] add fec support for imx6q

From: Shawn Guo <redacted>
Date: Sun, 18 Sep 2011 19:54:08 +0800

This series adds imx6q enet support.  The imx6q enet is a derivative of
imx28 enet controller.  It fixed the frame endian issue found on imx28,
and added 1 Gbps support.

It's based on v3.1-rc6.

Shawn Guo (4):
      net/fec: change phy-reset-gpio request warning to debug message
      net/fec: fix fec1 check in fec_enet_mii_init()
      net/fec: set phy_speed to the optimal frequency 2.5 MHz
      net/fec: add imx6q enet support

Please respin this against the net-next tree as that's where these
changes should be targetted and all the ethernet drivers have moved
to different directories in net-next.

Thanks.