[net-next 10/10] xilinx/ll_temac: Move the Xilinx drivers
flat view
From: Jeff Kirsher <hidden>
Date: 2011-08-12 10:53:01
Subsystem:
networking drivers, the rest, xilinx ll temac ethernet driver · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Move the Xilinx drivers into drivers/net/ethernet/xilinx/ and
make the necessary Kconfig and Makefile changes.
CC: John Williams <redacted>
CC: "David H. Lynch Jr." <redacted>
Signed-off-by: Jeff Kirsher <redacted>
---
drivers/net/Kconfig | 15 --------
drivers/net/Makefile | 4 --
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/xilinx/Kconfig | 35 ++++++++++++++++++++
drivers/net/ethernet/xilinx/Makefile | 7 ++++
drivers/net/{ => ethernet/xilinx}/ll_temac.h | 0
drivers/net/{ => ethernet/xilinx}/ll_temac_main.c | 0
drivers/net/{ => ethernet/xilinx}/ll_temac_mdio.c | 0
.../net/{ => ethernet/xilinx}/xilinx_emaclite.c | 0
10 files changed, 44 insertions(+), 19 deletions(-)
create mode 100644 drivers/net/ethernet/xilinx/Kconfig
create mode 100644 drivers/net/ethernet/xilinx/Makefile
rename drivers/net/{ => ethernet/xilinx}/ll_temac.h (100%)
rename drivers/net/{ => ethernet/xilinx}/ll_temac_main.c (100%)
rename drivers/net/{ => ethernet/xilinx}/ll_temac_mdio.c (100%)
rename drivers/net/{ => ethernet/xilinx}/xilinx_emaclite.c (100%)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 996bae0..2607a44 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig@@ -493,13 +493,6 @@ config NET_POCKET the questions about this class of network devices. If you say Y, you will be asked for your specific device in the following questions. -config XILINX_EMACLITE - tristate "Xilinx 10/100 Ethernet Lite support" - depends on PPC32 || MICROBLAZE - select PHYLIB - help - This driver supports the 10/100 Ethernet Lite from Xilinx. - config LANTIQ_ETOP tristate "Lantiq SoC ETOP driver" depends on SOC_TYPE_XWAY
@@ -539,14 +532,6 @@ config IP1000 To compile this driver as a module, choose M here: the module will be called ipg. This is recommended. -config XILINX_LL_TEMAC - tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver" - depends on PPC || MICROBLAZE - select PHYLIB - help - This driver supports the Xilinx 10/100/1000 LocalLink TEMAC - core used in Xilinx Spartan and Virtex FPGAs - endif # NETDEV_1000 #
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 271fc52..4c7af02 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile@@ -33,10 +33,6 @@ obj-$(CONFIG_NET_SB1000) += sb1000.o obj-$(CONFIG_HP100) += hp100.o obj-$(CONFIG_FORCEDETH) += forcedeth.o -ll_temac-objs := ll_temac_main.o ll_temac_mdio.o -obj-$(CONFIG_XILINX_LL_TEMAC) += ll_temac.o -obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o - obj-$(CONFIG_PPP) += ppp_generic.o obj-$(CONFIG_PPP_ASYNC) += ppp_async.o obj-$(CONFIG_PPP_SYNC_TTY) += ppp_synctty.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index c29c145..922f4d1 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig@@ -82,5 +82,6 @@ source "drivers/net/ethernet/ti/Kconfig" source "drivers/net/ethernet/toshiba/Kconfig" source "drivers/net/ethernet/tundra/Kconfig" source "drivers/net/ethernet/via/Kconfig" +source "drivers/net/ethernet/xilinx/Kconfig" endif # ETHERNET
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 8495c50..fcecd5f 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile@@ -50,3 +50,4 @@ obj-$(CONFIG_NET_VENDOR_TI) += ti/ obj-$(CONFIG_NET_VENDOR_TOSHIBA) += toshiba/ obj-$(CONFIG_NET_VENDOR_TUNDRA) += tundra/ obj-$(CONFIG_NET_VENDOR_VIA) += via/ +obj-$(CONFIG_NET_VENDOR_XILINX) += xilinx/
diff --git a/drivers/net/ethernet/xilinx/Kconfig b/drivers/net/ethernet/xilinx/Kconfig
new file mode 100644
index 0000000..4e3aad4
--- /dev/null
+++ b/drivers/net/ethernet/xilinx/Kconfig@@ -0,0 +1,35 @@ +# +# Xilink device configuration +# + +config NET_VENDOR_XILINX + bool "Xilinx devices" + depends on PPC || PPC32 || MICROBLAZE + ---help--- + If you have a network (Ethernet) card belonging to this class, say Y + and read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about Xilinx devices. If you say Y, you will be asked + for your specific card in the following questions. + +if NET_VENDOR_XILINX + +config XILINX_EMACLITE + tristate "Xilinx 10/100 Ethernet Lite support" + depends on (PPC32 || MICROBLAZE) + select PHYLIB + ---help--- + This driver supports the 10/100 Ethernet Lite from Xilinx. + +config XILINX_LL_TEMAC + tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver" + depends on (PPC || MICROBLAZE) + select PHYLIB + ---help--- + This driver supports the Xilinx 10/100/1000 LocalLink TEMAC + core used in Xilinx Spartan and Virtex FPGAs + +endif # NET_VENDOR_XILINX
diff --git a/drivers/net/ethernet/xilinx/Makefile b/drivers/net/ethernet/xilinx/Makefile
new file mode 100644
index 0000000..5feac73
--- /dev/null
+++ b/drivers/net/ethernet/xilinx/Makefile@@ -0,0 +1,7 @@ +# +# Makefile for the Xilink network device drivers. +# + +ll_temac-objs := ll_temac_main.o ll_temac_mdio.o +obj-$(CONFIG_XILINX_LL_TEMAC) += ll_temac.o +obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o
diff --git a/drivers/net/ll_temac.h b/drivers/net/ethernet/xilinx/ll_temac.h
similarity index 100%
rename from drivers/net/ll_temac.h
rename to drivers/net/ethernet/xilinx/ll_temac.h
diff --git a/drivers/net/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c
similarity index 100%
rename from drivers/net/ll_temac_main.c
rename to drivers/net/ethernet/xilinx/ll_temac_main.c
diff --git a/drivers/net/ll_temac_mdio.c b/drivers/net/ethernet/xilinx/ll_temac_mdio.c
similarity index 100%
rename from drivers/net/ll_temac_mdio.c
rename to drivers/net/ethernet/xilinx/ll_temac_mdio.c
diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
similarity index 100%
rename from drivers/net/xilinx_emaclite.c
rename to drivers/net/ethernet/xilinx/xilinx_emaclite.c
--
1.7.6