[net-next 00/10] drivers/net organize Ethernet drivers (5th series)

13 messages, 3 authors, 2011-08-12 · open the first message on its own page

[net-next 00/10] drivers/net organize Ethernet drivers (5th series)

From: Jeff Kirsher <hidden>
Date: 2011-08-12 10:52:54

This is the fifth of seven 10 patch series to move the Ethernet
drivers into drivers/net/ethernet/
  
The following are changes since commit 4c78893b3d107e2a053c8f51c526510857c09858:
  cnic: Fix select dependencies in bnx2fc/bnx2i Kconfig.
and are available in the git repository at:
  master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/next-organize master

Jeff Kirsher (10):
  sis*: Move the Silicon Integrated Systems (SiS) drivers
  cirrus: Move the Cirrus network driver
  nuvoton: Move the Nuvoton driver
  tsi108*: Move the Tundra driver
  s6gmac: Move the s6gmac drivers
  davinci*/tlan/cpmac: Move the Texas Instruments (TI) drivers
  hamachi/yellowfin: Move the packet engine drivers
  octeon: Move the Cavium driver
  jme: Move the JME driver
  xilinx/ll_temac: Move the Xilinx drivers

 MAINTAINERS                                        |   14 +-
 drivers/net/Kconfig                                |  160 --------------------
 drivers/net/Makefile                               |   19 ---
 drivers/net/arm/Kconfig                            |   17 --
 drivers/net/arm/Makefile                           |    2 -
 drivers/net/ethernet/Kconfig                       |   33 ++++
 drivers/net/ethernet/Makefile                      |   10 ++
 drivers/net/ethernet/cirrus/Kconfig                |   28 ++++
 drivers/net/ethernet/cirrus/Makefile               |    5 +
 drivers/net/{arm => ethernet/cirrus}/ep93xx_eth.c  |    0
 drivers/net/{ => ethernet}/jme.c                   |    0
 drivers/net/{ => ethernet}/jme.h                   |    0
 drivers/net/ethernet/nuvoton/Kconfig               |   29 ++++
 drivers/net/ethernet/nuvoton/Makefile              |    5 +
 .../net/{arm => ethernet/nuvoton}/w90p910_ether.c  |    0
 drivers/net/{ => ethernet}/octeon/Kconfig          |    6 +-
 drivers/net/ethernet/octeon/Makefile               |    5 +
 drivers/net/{ => ethernet}/octeon/octeon_mgmt.c    |    0
 drivers/net/ethernet/packetengines/Kconfig         |   46 ++++++
 drivers/net/ethernet/packetengines/Makefile        |    6 +
 drivers/net/{ => ethernet/packetengines}/hamachi.c |    0
 .../net/{ => ethernet/packetengines}/yellowfin.c   |    0
 drivers/net/{ => ethernet}/s6gmac.c                |    0
 drivers/net/ethernet/sis/Kconfig                   |   50 ++++++
 drivers/net/ethernet/sis/Makefile                  |    6 +
 drivers/net/{ => ethernet/sis}/sis190.c            |    0
 drivers/net/{ => ethernet/sis}/sis900.c            |    0
 drivers/net/{ => ethernet/sis}/sis900.h            |    0
 drivers/net/ethernet/ti/Kconfig                    |   76 +++++++++
 drivers/net/ethernet/ti/Makefile                   |    9 +
 drivers/net/{ => ethernet/ti}/cpmac.c              |    0
 drivers/net/{ => ethernet/ti}/davinci_cpdma.c      |    0
 drivers/net/{ => ethernet/ti}/davinci_cpdma.h      |    0
 drivers/net/{ => ethernet/ti}/davinci_emac.c       |    0
 drivers/net/{ => ethernet/ti}/davinci_mdio.c       |    0
 drivers/net/{ => ethernet/ti}/tlan.c               |    0
 drivers/net/{ => ethernet/ti}/tlan.h               |    0
 drivers/net/ethernet/tundra/Kconfig                |   28 ++++
 drivers/net/ethernet/tundra/Makefile               |    5 +
 drivers/net/{ => ethernet/tundra}/tsi108_eth.c     |    0
 drivers/net/{ => ethernet/tundra}/tsi108_eth.h     |    0
 drivers/net/ethernet/xilinx/Kconfig                |   35 +++++
 drivers/net/ethernet/xilinx/Makefile               |    7 +
 drivers/net/{ => ethernet/xilinx}/ll_temac.h       |    0
 drivers/net/{ => ethernet/xilinx}/ll_temac_main.c  |    0
 drivers/net/{ => ethernet/xilinx}/ll_temac_mdio.c  |    0
 .../net/{ => ethernet/xilinx}/xilinx_emaclite.c    |    0
 drivers/net/octeon/Makefile                        |    2 -
 48 files changed, 395 insertions(+), 208 deletions(-)
 create mode 100644 drivers/net/ethernet/cirrus/Kconfig
 create mode 100644 drivers/net/ethernet/cirrus/Makefile
 rename drivers/net/{arm => ethernet/cirrus}/ep93xx_eth.c (100%)
 rename drivers/net/{ => ethernet}/jme.c (100%)
 rename drivers/net/{ => ethernet}/jme.h (100%)
 create mode 100644 drivers/net/ethernet/nuvoton/Kconfig
 create mode 100644 drivers/net/ethernet/nuvoton/Makefile
 rename drivers/net/{arm => ethernet/nuvoton}/w90p910_ether.c (100%)
 rename drivers/net/{ => ethernet}/octeon/Kconfig (85%)
 create mode 100644 drivers/net/ethernet/octeon/Makefile
 rename drivers/net/{ => ethernet}/octeon/octeon_mgmt.c (100%)
 create mode 100644 drivers/net/ethernet/packetengines/Kconfig
 create mode 100644 drivers/net/ethernet/packetengines/Makefile
 rename drivers/net/{ => ethernet/packetengines}/hamachi.c (100%)
 rename drivers/net/{ => ethernet/packetengines}/yellowfin.c (100%)
 rename drivers/net/{ => ethernet}/s6gmac.c (100%)
 create mode 100644 drivers/net/ethernet/sis/Kconfig
 create mode 100644 drivers/net/ethernet/sis/Makefile
 rename drivers/net/{ => ethernet/sis}/sis190.c (100%)
 rename drivers/net/{ => ethernet/sis}/sis900.c (100%)
 rename drivers/net/{ => ethernet/sis}/sis900.h (100%)
 create mode 100644 drivers/net/ethernet/ti/Kconfig
 create mode 100644 drivers/net/ethernet/ti/Makefile
 rename drivers/net/{ => ethernet/ti}/cpmac.c (100%)
 rename drivers/net/{ => ethernet/ti}/davinci_cpdma.c (100%)
 rename drivers/net/{ => ethernet/ti}/davinci_cpdma.h (100%)
 rename drivers/net/{ => ethernet/ti}/davinci_emac.c (100%)
 rename drivers/net/{ => ethernet/ti}/davinci_mdio.c (100%)
 rename drivers/net/{ => ethernet/ti}/tlan.c (100%)
 rename drivers/net/{ => ethernet/ti}/tlan.h (100%)
 create mode 100644 drivers/net/ethernet/tundra/Kconfig
 create mode 100644 drivers/net/ethernet/tundra/Makefile
 rename drivers/net/{ => ethernet/tundra}/tsi108_eth.c (100%)
 rename drivers/net/{ => ethernet/tundra}/tsi108_eth.h (100%)
 create mode 100644 drivers/net/ethernet/xilinx/Kconfig
 create mode 100644 drivers/net/ethernet/xilinx/Makefile
 rename drivers/net/{ => ethernet/xilinx}/ll_temac.h (100%)
 rename drivers/net/{ => ethernet/xilinx}/ll_temac_main.c (100%)
 rename drivers/net/{ => ethernet/xilinx}/ll_temac_mdio.c (100%)
 rename drivers/net/{ => ethernet/xilinx}/xilinx_emaclite.c (100%)
 delete mode 100644 drivers/net/octeon/Makefile

-- 
1.7.6

[net-next 01/10] sis*: Move the Silicon Integrated Systems (SiS) drivers

From: Jeff Kirsher <hidden>
Date: 2011-08-12 10:52:54

Move the SiS drivers into drivers/net/ethernet/sis/ and make the
necessary Kconfig and Makefile changes

CC: Daniele Venzano <venza@brownhat.org>
CC: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Kirsher <redacted>
---
 MAINTAINERS                             |    4 +-
 drivers/net/Kconfig                     |   30 ------------------
 drivers/net/Makefile                    |    2 -
 drivers/net/ethernet/Kconfig            |    1 +
 drivers/net/ethernet/Makefile           |    1 +
 drivers/net/ethernet/sis/Kconfig        |   50 +++++++++++++++++++++++++++++++
 drivers/net/ethernet/sis/Makefile       |    6 ++++
 drivers/net/{ => ethernet/sis}/sis190.c |    0
 drivers/net/{ => ethernet/sis}/sis900.c |    0
 drivers/net/{ => ethernet/sis}/sis900.h |    0
 10 files changed, 60 insertions(+), 34 deletions(-)
 create mode 100644 drivers/net/ethernet/sis/Kconfig
 create mode 100644 drivers/net/ethernet/sis/Makefile
 rename drivers/net/{ => ethernet/sis}/sis190.c (100%)
 rename drivers/net/{ => ethernet/sis}/sis900.c (100%)
 rename drivers/net/{ => ethernet/sis}/sis900.h (100%)

diff --git a/MAINTAINERS b/MAINTAINERS
index 84948bd..96a2d47 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS

@@ -5820,14 +5820,14 @@ SIS 190 ETHERNET DRIVER
 M:	Francois Romieu <romieu@fr.zoreil.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/sis190.c
+F:	drivers/net/ethernet/sis/sis190.c
 
 SIS 900/7016 FAST ETHERNET DRIVER
 M:	Daniele Venzano <venza@brownhat.org>
 W:	http://www.brownhat.org/sis900.html
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/sis900.*
+F:	drivers/net/ethernet/sis/sis900.*
 
 SIS 96X I2C/SMBUS DRIVER
 M:	"Mark M. Hoffman" <mhoffman@lightlink.com>

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 1e1df3d..33df254 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig

@@ -500,22 +500,6 @@ config R6040
 	  To compile this driver as a module, choose M here: the module
 	  will be called r6040. This is recommended.
 
-config SIS900
-	tristate "SiS 900/7016 PCI Fast Ethernet Adapter support"
-	depends on NET_PCI && PCI
-	select CRC32
-	select MII
-	---help---
-	  This is a driver for the Fast Ethernet PCI network cards based on
-	  the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in
-	  SiS 630 and SiS 540 chipsets.
-
-	  This driver also supports AMD 79C901 HomePNA so that you can use
-	  your phone line as a network cable.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called sis900.  This is recommended.
-
 config TLAN
 	tristate "TI ThunderLAN support"
 	depends on NET_PCI && (PCI || EISA)

@@ -639,20 +623,6 @@ config YELLOWFIN
 	  To compile this driver as a module, choose M here: the module
 	  will be called yellowfin.  This is recommended.
 
-config SIS190
-	tristate "SiS190/SiS191 gigabit ethernet support"
-	depends on PCI
-	select CRC32
-	select MII
-	---help---
-	  Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or
-	  a SiS 191 PCI Gigabit Ethernet adapter. Both are expected to
-	  appear in lan on motherboard designs which are based on SiS 965
-	  and SiS 966 south bridge.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called sis190.  This is recommended.
-
 config TSI108_ETH
 	tristate "Tundra TSI108 gigabit Ethernet support"
 	depends on TSI108_BRIDGE

diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 275ed4a..3b14f1a 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile

@@ -24,8 +24,6 @@ obj-$(CONFIG_PLIP) += plip.o
 obj-$(CONFIG_ROADRUNNER) += rrunner.o
 
 obj-$(CONFIG_TLAN) += tlan.o
-obj-$(CONFIG_SIS190) += sis190.o
-obj-$(CONFIG_SIS900) += sis900.o
 obj-$(CONFIG_R6040) += r6040.o
 obj-$(CONFIG_YELLOWFIN) += yellowfin.o
 obj-$(CONFIG_FEALNX) += fealnx.o

diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 9754247..b15b1e2 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig

@@ -42,6 +42,7 @@ source "drivers/net/ethernet/qlogic/Kconfig"
 source "drivers/net/ethernet/racal/Kconfig"
 source "drivers/net/ethernet/realtek/Kconfig"
 source "drivers/net/ethernet/seeq/Kconfig"
+source "drivers/net/ethernet/sis/Kconfig"
 source "drivers/net/ethernet/sfc/Kconfig"
 source "drivers/net/ethernet/sgi/Kconfig"
 source "drivers/net/ethernet/smsc/Kconfig"

diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 7e7a319..1f45ec9 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile

@@ -33,6 +33,7 @@ obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
 obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
 obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
 obj-$(CONFIG_NET_VENDOR_SEEQ) += seeq/
+obj-$(CONFIG_NET_VENDOR_SIS) += sis/
 obj-$(CONFIG_SFC) += sfc/
 obj-$(CONFIG_NET_VENDOR_SGI) += sgi/
 obj-$(CONFIG_NET_VENDOR_SMSC) += smsc/

diff --git a/drivers/net/ethernet/sis/Kconfig b/drivers/net/ethernet/sis/Kconfig
new file mode 100644
index 0000000..01d43e8
--- /dev/null
+++ b/drivers/net/ethernet/sis/Kconfig

@@ -0,0 +1,50 @@
+#
+# Silicon Integrated Systems (SiS) device configuration
+#
+
+config NET_VENDOR_SIS
+	bool "Silicon Integrated Systems (SiS) devices"
+	depends on PCI
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about SiS devices. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_SIS
+
+config SIS900
+	tristate "SiS 900/7016 PCI Fast Ethernet Adapter support"
+	depends on PCI
+	select CRC32
+	select MII
+	---help---
+	  This is a driver for the Fast Ethernet PCI network cards based on
+	  the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in
+	  SiS 630 and SiS 540 chipsets.
+
+	  This driver also supports AMD 79C901 HomePNA so that you can use
+	  your phone line as a network cable.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sis900.  This is recommended.
+
+config SIS190
+	tristate "SiS190/SiS191 gigabit ethernet support"
+	depends on PCI
+	select CRC32
+	select MII
+	---help---
+	  Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or
+	  a SiS 191 PCI Gigabit Ethernet adapter. Both are expected to
+	  appear in lan on motherboard designs which are based on SiS 965
+	  and SiS 966 south bridge.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sis190.  This is recommended.
+
+endif # NET_VENDOR_SIS

diff --git a/drivers/net/ethernet/sis/Makefile b/drivers/net/ethernet/sis/Makefile
new file mode 100644
index 0000000..58d3ac1
--- /dev/null
+++ b/drivers/net/ethernet/sis/Makefile

@@ -0,0 +1,6 @@
+#
+# Makefile for Silicon Integrated Systems (SiS) network device drivers.
+#
+
+obj-$(CONFIG_SIS190) += sis190.o
+obj-$(CONFIG_SIS900) += sis900.o

diff --git a/drivers/net/sis190.c b/drivers/net/ethernet/sis/sis190.c
similarity index 100%
rename from drivers/net/sis190.c
rename to drivers/net/ethernet/sis/sis190.c
diff --git a/drivers/net/sis900.c b/drivers/net/ethernet/sis/sis900.c
similarity index 100%
rename from drivers/net/sis900.c
rename to drivers/net/ethernet/sis/sis900.c
diff --git a/drivers/net/sis900.h b/drivers/net/ethernet/sis/sis900.h
similarity index 100%
rename from drivers/net/sis900.h
rename to drivers/net/ethernet/sis/sis900.h
-- 
1.7.6

[net-next 02/10] cirrus: Move the Cirrus network driver

From: Jeff Kirsher <hidden>
Date: 2011-08-12 10:52:55

Move the Cirrus Ethernet driver into drivers/net/ethernet/cirrus/
and make the necessary Kconfig and Makefile changes

CC: Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Jeff Kirsher <redacted>
---
 MAINTAINERS                                       |    2 +-
 drivers/net/arm/Kconfig                           |    8 ------
 drivers/net/arm/Makefile                          |    1 -
 drivers/net/ethernet/Kconfig                      |    1 +
 drivers/net/ethernet/Makefile                     |    1 +
 drivers/net/ethernet/cirrus/Kconfig               |   28 +++++++++++++++++++++
 drivers/net/ethernet/cirrus/Makefile              |    5 +++
 drivers/net/{arm => ethernet/cirrus}/ep93xx_eth.c |    0
 8 files changed, 36 insertions(+), 10 deletions(-)
 create mode 100644 drivers/net/ethernet/cirrus/Kconfig
 create mode 100644 drivers/net/ethernet/cirrus/Makefile
 rename drivers/net/{arm => ethernet/cirrus}/ep93xx_eth.c (100%)

diff --git a/MAINTAINERS b/MAINTAINERS
index 96a2d47..ee4ebb4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS

@@ -1768,7 +1768,7 @@ CIRRUS LOGIC EP93XX ETHERNET DRIVER
 M:	Hartley Sweeten <hsweeten@visionengravers.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/arm/ep93xx_eth.c
+F:	drivers/net/ethernet/cirrus/ep93xx_eth.c
 
 CIRRUS LOGIC EP93XX OHCI USB HOST DRIVER
 M:	Lennert Buytenhek <kernel@wantstofly.org>

diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig
index 4f748cc..fc94b4b 100644
--- a/drivers/net/arm/Kconfig
+++ b/drivers/net/arm/Kconfig

@@ -11,14 +11,6 @@ config ARM_AT91_ETHER
 	  If you wish to compile a kernel for the AT91RM9200 and enable
 	  ethernet support, then you should always answer Y to this.
 
-config EP93XX_ETH
-	tristate "EP93xx Ethernet support"
-	depends on ARM && ARCH_EP93XX
-	select MII
-	help
-	  This is a driver for the ethernet hardware included in EP93xx CPUs.
-	  Say Y if you are building a kernel for EP93xx based devices.
-
 config W90P910_ETH
 	tristate "Nuvoton w90p910 Ethernet support"
 	depends on ARM && ARCH_W90X900

diff --git a/drivers/net/arm/Makefile b/drivers/net/arm/Makefile
index 316b06c..462b3a4 100644
--- a/drivers/net/arm/Makefile
+++ b/drivers/net/arm/Makefile

@@ -4,5 +4,4 @@
 #
 
 obj-$(CONFIG_ARM_AT91_ETHER)	+= at91_ether.o
-obj-$(CONFIG_EP93XX_ETH)	+= ep93xx_eth.o
 obj-$(CONFIG_W90P910_ETH)	+= w90p910_ether.o

diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index b15b1e2..ff07408 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig

@@ -18,6 +18,7 @@ source "drivers/net/ethernet/atheros/Kconfig"
 source "drivers/net/ethernet/broadcom/Kconfig"
 source "drivers/net/ethernet/brocade/Kconfig"
 source "drivers/net/ethernet/chelsio/Kconfig"
+source "drivers/net/ethernet/cirrus/Kconfig"
 source "drivers/net/ethernet/cisco/Kconfig"
 source "drivers/net/ethernet/dec/Kconfig"
 source "drivers/net/ethernet/dlink/Kconfig"

diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 1f45ec9..3a17413 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile

@@ -10,6 +10,7 @@ obj-$(CONFIG_NET_VENDOR_ATHEROS) += atheros/
 obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
 obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/
 obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
+obj-$(CONFIG_NET_VENDOR_CIRRUS) += cirrus/
 obj-$(CONFIG_NET_VENDOR_CISCO) += cisco/
 obj-$(CONFIG_NET_VENDOR_DEC) += dec/
 obj-$(CONFIG_NET_VENDOR_DLINK) += dlink/

diff --git a/drivers/net/ethernet/cirrus/Kconfig b/drivers/net/ethernet/cirrus/Kconfig
new file mode 100644
index 0000000..53ebe78
--- /dev/null
+++ b/drivers/net/ethernet/cirrus/Kconfig

@@ -0,0 +1,28 @@
+#
+# Cirrus network device configuration
+#
+
+config NET_VENDOR_CIRRUS
+	bool "Cirrus devices"
+	depends on ARM && ARCH_EP93XX
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Cirrus cards. If you say Y, you will be asked
+	  for your specific card in the following questions.
+
+if NET_VENDOR_CIRRUS
+
+config EP93XX_ETH
+	tristate "EP93xx Ethernet support"
+	depends on ARM && ARCH_EP93XX
+	select MII
+	help
+	  This is a driver for the ethernet hardware included in EP93xx CPUs.
+	  Say Y if you are building a kernel for EP93xx based devices.
+
+endif # NET_VENDOR_CIRRUS

diff --git a/drivers/net/ethernet/cirrus/Makefile b/drivers/net/ethernet/cirrus/Makefile
new file mode 100644
index 0000000..9905ea2
--- /dev/null
+++ b/drivers/net/ethernet/cirrus/Makefile

@@ -0,0 +1,5 @@
+#
+# Makefile for the Cirrus network device drivers.
+#
+
+obj-$(CONFIG_EP93XX_ETH) += ep93xx_eth.o

diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/ethernet/cirrus/ep93xx_eth.c
similarity index 100%
rename from drivers/net/arm/ep93xx_eth.c
rename to drivers/net/ethernet/cirrus/ep93xx_eth.c
-- 
1.7.6

[net-next 04/10] tsi108*: Move the Tundra driver

From: Jeff Kirsher <hidden>
Date: 2011-08-12 10:52:56

Move the Tundra driver to drivers/net/ethernet/tundra/ and
make the necessary Kocnfig and Makefile changes.

CC: Kong Lai <redacted>
Signed-off-by: Jeff Kirsher <redacted>
---
 drivers/net/Kconfig                            |    8 ------
 drivers/net/Makefile                           |    1 -
 drivers/net/ethernet/Kconfig                   |    1 +
 drivers/net/ethernet/Makefile                  |    1 +
 drivers/net/ethernet/tundra/Kconfig            |   28 ++++++++++++++++++++++++
 drivers/net/ethernet/tundra/Makefile           |    5 ++++
 drivers/net/{ => ethernet/tundra}/tsi108_eth.c |    0
 drivers/net/{ => ethernet/tundra}/tsi108_eth.h |    0
 8 files changed, 35 insertions(+), 9 deletions(-)
 create mode 100644 drivers/net/ethernet/tundra/Kconfig
 create mode 100644 drivers/net/ethernet/tundra/Makefile
 rename drivers/net/{ => ethernet/tundra}/tsi108_eth.c (100%)
 rename drivers/net/{ => ethernet/tundra}/tsi108_eth.h (100%)

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 33df254..a96cf18 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig

@@ -623,14 +623,6 @@ config YELLOWFIN
 	  To compile this driver as a module, choose M here: the module
 	  will be called yellowfin.  This is recommended.
 
-config TSI108_ETH
-	tristate "Tundra TSI108 gigabit Ethernet support"
-	depends on TSI108_BRIDGE
-	help
-	  This driver supports Tundra TSI108 gigabit Ethernet ports.
-	  To compile this driver as a module, choose M here: the module
-	  will be called tsi108_eth.
-
 config XILINX_LL_TEMAC
 	tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver"
 	depends on PPC || MICROBLAZE

diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 3b14f1a..d7ac2f8 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile

@@ -42,7 +42,6 @@ obj-$(CONFIG_NET_SB1000) += sb1000.o
 obj-$(CONFIG_HP100) += hp100.o
 obj-$(CONFIG_FORCEDETH) += forcedeth.o
 
-obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o
 ll_temac-objs := ll_temac_main.o ll_temac_mdio.o
 obj-$(CONFIG_XILINX_LL_TEMAC) += ll_temac.o
 obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o

diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 3893065..8f404ea 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig

@@ -52,6 +52,7 @@ source "drivers/net/ethernet/stmicro/Kconfig"
 source "drivers/net/ethernet/sun/Kconfig"
 source "drivers/net/ethernet/tehuti/Kconfig"
 source "drivers/net/ethernet/toshiba/Kconfig"
+source "drivers/net/ethernet/tundra/Kconfig"
 source "drivers/net/ethernet/via/Kconfig"
 
 endif # ETHERNET

diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index e1f0b94..6cf7f99 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile

@@ -43,4 +43,5 @@ obj-$(CONFIG_NET_VENDOR_STMICRO) += stmicro/
 obj-$(CONFIG_NET_VENDOR_SUN) += sun/
 obj-$(CONFIG_NET_VENDOR_TEHUTI) += tehuti/
 obj-$(CONFIG_NET_VENDOR_TOSHIBA) += toshiba/
+obj-$(CONFIG_NET_VENDOR_TUNDRA) += tundra/
 obj-$(CONFIG_NET_VENDOR_VIA) += via/

diff --git a/drivers/net/ethernet/tundra/Kconfig b/drivers/net/ethernet/tundra/Kconfig
new file mode 100644
index 0000000..03925d1
--- /dev/null
+++ b/drivers/net/ethernet/tundra/Kconfig

@@ -0,0 +1,28 @@
+#
+# Tundra network device configuration
+#
+
+config NET_VENDOR_TUNDRA
+	bool "Tundra devices"
+	depends on TSI108_BRIDGE
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Tundra cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_TUNDRA
+
+config TSI108_ETH
+	tristate "Tundra TSI108 gigabit Ethernet support"
+	depends on TSI108_BRIDGE
+	---help---
+	  This driver supports Tundra TSI108 gigabit Ethernet ports.
+	  To compile this driver as a module, choose M here: the module
+	  will be called tsi108_eth.
+
+endif # NET_VENDOR_TUNDRA

diff --git a/drivers/net/ethernet/tundra/Makefile b/drivers/net/ethernet/tundra/Makefile
new file mode 100644
index 0000000..439f693
--- /dev/null
+++ b/drivers/net/ethernet/tundra/Makefile

@@ -0,0 +1,5 @@
+#
+# Makefile for the Tundra network device drivers.
+#
+
+obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o

diff --git a/drivers/net/tsi108_eth.c b/drivers/net/ethernet/tundra/tsi108_eth.c
similarity index 100%
rename from drivers/net/tsi108_eth.c
rename to drivers/net/ethernet/tundra/tsi108_eth.c
diff --git a/drivers/net/tsi108_eth.h b/drivers/net/ethernet/tundra/tsi108_eth.h
similarity index 100%
rename from drivers/net/tsi108_eth.h
rename to drivers/net/ethernet/tundra/tsi108_eth.h
-- 
1.7.6

[net-next 03/10] nuvoton: Move the Nuvoton driver

From: Jeff Kirsher <hidden>
Date: 2011-08-12 10:52:56

Move the Nuvoton driver into drivers/net/ethernet/nuvoton/ and
make the necessary Kconfig and Makefile changes.

CC: Wan ZongShun <redacted>
Signed-off-by: Jeff Kirsher <redacted>
---
 MAINTAINERS                                        |    2 +-
 drivers/net/arm/Kconfig                            |    9 ------
 drivers/net/arm/Makefile                           |    1 -
 drivers/net/ethernet/Kconfig                       |    1 +
 drivers/net/ethernet/Makefile                      |    1 +
 drivers/net/ethernet/nuvoton/Kconfig               |   29 ++++++++++++++++++++
 drivers/net/ethernet/nuvoton/Makefile              |    5 +++
 .../net/{arm => ethernet/nuvoton}/w90p910_ether.c  |    0
 8 files changed, 37 insertions(+), 11 deletions(-)
 create mode 100644 drivers/net/ethernet/nuvoton/Kconfig
 create mode 100644 drivers/net/ethernet/nuvoton/Makefile
 rename drivers/net/{arm => ethernet/nuvoton}/w90p910_ether.c (100%)

diff --git a/MAINTAINERS b/MAINTAINERS
index ee4ebb4..d31fd9e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS

@@ -1127,7 +1127,7 @@ F:	arch/arm/mach-nuc93x/
 F:	drivers/input/keyboard/w90p910_keypad.c
 F:	drivers/input/touchscreen/w90p910_ts.c
 F:	drivers/watchdog/nuc900_wdt.c
-F:	drivers/net/arm/w90p910_ether.c
+F:	drivers/net/ethernet/nuvoton/w90p910_ether.c
 F:	drivers/mtd/nand/nuc900_nand.c
 F:	drivers/rtc/rtc-nuc900.c
 F:	drivers/spi/spi_nuc900.c

diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig
index fc94b4b..57d16b9 100644
--- a/drivers/net/arm/Kconfig
+++ b/drivers/net/arm/Kconfig

@@ -10,12 +10,3 @@ config ARM_AT91_ETHER
 	help
 	  If you wish to compile a kernel for the AT91RM9200 and enable
 	  ethernet support, then you should always answer Y to this.
-
-config W90P910_ETH
-	tristate "Nuvoton w90p910 Ethernet support"
-	depends on ARM && ARCH_W90X900
-	select PHYLIB
-	select MII
-	help
-	  Say Y here if you want to use built-in Ethernet ports
-	  on w90p910 processor.

diff --git a/drivers/net/arm/Makefile b/drivers/net/arm/Makefile
index 462b3a4..fc0f85c 100644
--- a/drivers/net/arm/Makefile
+++ b/drivers/net/arm/Makefile

@@ -4,4 +4,3 @@
 #
 
 obj-$(CONFIG_ARM_AT91_ETHER)	+= at91_ether.o
-obj-$(CONFIG_W90P910_ETH)	+= w90p910_ether.o

diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index ff07408..3893065 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig

@@ -37,6 +37,7 @@ source "drivers/net/ethernet/micrel/Kconfig"
 source "drivers/net/ethernet/myricom/Kconfig"
 source "drivers/net/ethernet/natsemi/Kconfig"
 source "drivers/net/ethernet/8390/Kconfig"
+source "drivers/net/ethernet/nuvoton/Kconfig"
 source "drivers/net/ethernet/oki-semi/Kconfig"
 source "drivers/net/ethernet/pasemi/Kconfig"
 source "drivers/net/ethernet/qlogic/Kconfig"

diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 3a17413..e1f0b94 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile

@@ -28,6 +28,7 @@ obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
 obj-$(CONFIG_NET_VENDOR_MICREL) += micrel/
 obj-$(CONFIG_NET_VENDOR_MYRI) += myricom/
 obj-$(CONFIG_NET_VENDOR_NATSEMI) += natsemi/
+obj-$(CONFIG_NET_VENDOR_NUVOTON) += nuvoton/
 obj-$(CONFIG_NET_VENDOR_OKI) += oki-semi/
 obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
 obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/

diff --git a/drivers/net/ethernet/nuvoton/Kconfig b/drivers/net/ethernet/nuvoton/Kconfig
new file mode 100644
index 0000000..3b91c3b
--- /dev/null
+++ b/drivers/net/ethernet/nuvoton/Kconfig

@@ -0,0 +1,29 @@
+#
+# Nuvoton network device configuration
+#
+
+config NET_VENDOR_NUVOTON
+	bool "Nuvoton devices"
+	depends on ARM && ARCH_W90X900
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Nuvoton cards. If you say Y, you will be asked
+	  for your specific card in the following questions.
+
+if NET_VENDOR_NUVOTON
+
+config W90P910_ETH
+	tristate "Nuvoton w90p910 Ethernet support"
+	depends on ARM && ARCH_W90X900
+	select PHYLIB
+	select MII
+	---help---
+	  Say Y here if you want to use built-in Ethernet ports
+	  on w90p910 processor.
+
+endif # NET_VENDOR_NUVOTON

diff --git a/drivers/net/ethernet/nuvoton/Makefile b/drivers/net/ethernet/nuvoton/Makefile
new file mode 100644
index 0000000..171aa04
--- /dev/null
+++ b/drivers/net/ethernet/nuvoton/Makefile

@@ -0,0 +1,5 @@
+#
+# Makefile for the Nuvoton network device drivers.
+#
+
+obj-$(CONFIG_W90P910_ETH) += w90p910_ether.o

diff --git a/drivers/net/arm/w90p910_ether.c b/drivers/net/ethernet/nuvoton/w90p910_ether.c
similarity index 100%
rename from drivers/net/arm/w90p910_ether.c
rename to drivers/net/ethernet/nuvoton/w90p910_ether.c
-- 
1.7.6

[net-next 05/10] s6gmac: Move the s6gmac drivers

From: Jeff Kirsher <hidden>
Date: 2011-08-12 10:52:57

Move the s6gmac driver to drivers/net/ethernet/ and
make the necessary Kconfig and Makefile changes.

CC: Oskar Schirmer <redacted>
Signed-off-by: Jeff Kirsher <redacted>
---
 drivers/net/Kconfig                 |   11 -----------
 drivers/net/Makefile                |    1 -
 drivers/net/ethernet/Kconfig        |   12 ++++++++++++
 drivers/net/ethernet/Makefile       |    1 +
 drivers/net/{ => ethernet}/s6gmac.c |    0
 5 files changed, 13 insertions(+), 12 deletions(-)
 rename drivers/net/{ => ethernet}/s6gmac.c (100%)

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index a96cf18..134c3a4 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig

@@ -643,17 +643,6 @@ config JME
 	  To compile this driver as a module, choose M here. The module
 	  will be called jme.
 
-config S6GMAC
-	tristate "S6105 GMAC ethernet support"
-	depends on XTENSA_VARIANT_S6000
-	select PHYLIB
-	help
-	  This driver supports the on chip ethernet device on the
-	  S6105 xtensa processor.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called s6gmac.
-
 endif # NETDEV_1000
 
 #

diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index d7ac2f8..938484f 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile

@@ -83,7 +83,6 @@ obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
 
 obj-$(CONFIG_DNET) += dnet.o
 obj-$(CONFIG_MACB) += macb.o
-obj-$(CONFIG_S6GMAC) += s6gmac.o
 
 obj-$(CONFIG_ARM) += arm/
 obj-$(CONFIG_DEV_APPLETALK) += appletalk/

diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 8f404ea..f53a4bc 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig

@@ -43,6 +43,18 @@ source "drivers/net/ethernet/pasemi/Kconfig"
 source "drivers/net/ethernet/qlogic/Kconfig"
 source "drivers/net/ethernet/racal/Kconfig"
 source "drivers/net/ethernet/realtek/Kconfig"
+
+config S6GMAC
+	tristate "S6105 GMAC ethernet support"
+	depends on XTENSA_VARIANT_S6000
+	select PHYLIB
+	---help---
+	  This driver supports the on chip ethernet device on the
+	  S6105 xtensa processor.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called s6gmac.
+
 source "drivers/net/ethernet/seeq/Kconfig"
 source "drivers/net/ethernet/sis/Kconfig"
 source "drivers/net/ethernet/sfc/Kconfig"

diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 6cf7f99..4491d84 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile

@@ -34,6 +34,7 @@ obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
 obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
 obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
 obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
+obj-$(CONFIG_S6GMAC) += s6gmac.o
 obj-$(CONFIG_NET_VENDOR_SEEQ) += seeq/
 obj-$(CONFIG_NET_VENDOR_SIS) += sis/
 obj-$(CONFIG_SFC) += sfc/

diff --git a/drivers/net/s6gmac.c b/drivers/net/ethernet/s6gmac.c
similarity index 100%
rename from drivers/net/s6gmac.c
rename to drivers/net/ethernet/s6gmac.c
-- 
1.7.6

[net-next 06/10] davinci*/tlan/cpmac: Move the Texas Instruments (TI) drivers

From: Jeff Kirsher <hidden>
Date: 2011-08-12 10:52:58

Move the Texas Instruments drivers to drivers/net/ethernet/ti/ and
make the necessary Kconfig and Makefile changes.

CC: Sriram <redacted>
CC: Vinay Hegde <redacted>
CC: Cyril Chemparathy <redacted>
CC: Samuel Chessman <chessman@tux.org>
CC: <redacted>
CC: Eugene Konev <redacted>
CC: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Jeff Kirsher <redacted>
---
 MAINTAINERS                                   |    4 +-
 drivers/net/Kconfig                           |   56 ------------------
 drivers/net/Makefile                          |    7 --
 drivers/net/ethernet/Kconfig                  |    1 +
 drivers/net/ethernet/Makefile                 |    1 +
 drivers/net/ethernet/ti/Kconfig               |   76 +++++++++++++++++++++++++
 drivers/net/ethernet/ti/Makefile              |    9 +++
 drivers/net/{ => ethernet/ti}/cpmac.c         |    0
 drivers/net/{ => ethernet/ti}/davinci_cpdma.c |    0
 drivers/net/{ => ethernet/ti}/davinci_cpdma.h |    0
 drivers/net/{ => ethernet/ti}/davinci_emac.c  |    0
 drivers/net/{ => ethernet/ti}/davinci_mdio.c  |    0
 drivers/net/{ => ethernet/ti}/tlan.c          |    0
 drivers/net/{ => ethernet/ti}/tlan.h          |    0
 14 files changed, 89 insertions(+), 65 deletions(-)
 create mode 100644 drivers/net/ethernet/ti/Kconfig
 create mode 100644 drivers/net/ethernet/ti/Makefile
 rename drivers/net/{ => ethernet/ti}/cpmac.c (100%)
 rename drivers/net/{ => ethernet/ti}/davinci_cpdma.c (100%)
 rename drivers/net/{ => ethernet/ti}/davinci_cpdma.h (100%)
 rename drivers/net/{ => ethernet/ti}/davinci_emac.c (100%)
 rename drivers/net/{ => ethernet/ti}/davinci_mdio.c (100%)
 rename drivers/net/{ => ethernet/ti}/tlan.c (100%)
 rename drivers/net/{ => ethernet/ti}/tlan.h (100%)

diff --git a/MAINTAINERS b/MAINTAINERS
index d31fd9e..622f4fc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS

@@ -1908,7 +1908,7 @@ CPMAC ETHERNET DRIVER
 M:	Florian Fainelli <florian@openwrt.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/cpmac.c
+F:	drivers/net/ethernet/ti/cpmac.c
 
 CPU FREQUENCY DRIVERS
 M:	Dave Jones <davej@redhat.com>

@@ -6420,7 +6420,7 @@ L:	tlan-devel@lists.sourceforge.net (subscribers-only)
 W:	http://sourceforge.net/projects/tlan/
 S:	Maintained
 F:	Documentation/networking/tlan.txt
-F:	drivers/net/tlan.*
+F:	drivers/net/ethernet/ti/tlan.*
 
 TOMOYO SECURITY MODULE
 M:	Kentaro Takeda <takedakn@nttdata.co.jp>

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 134c3a4..e8d65fe 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig

@@ -323,37 +323,6 @@ config NET_NETX
 	  To compile this driver as a module, choose M here. The module
 	  will be called netx-eth.
 
-config TI_DAVINCI_EMAC
-	tristate "TI DaVinci EMAC Support"
-	depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
-	select TI_DAVINCI_MDIO
-	select TI_DAVINCI_CPDMA
-	select PHYLIB
-	help
-	  This driver supports TI's DaVinci Ethernet .
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called davinci_emac_driver.  This is recommended.
-
-config TI_DAVINCI_MDIO
-	tristate "TI DaVinci MDIO Support"
-	depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
-	select PHYLIB
-	help
-	  This driver supports TI's DaVinci MDIO module.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called davinci_mdio.  This is recommended.
-
-config TI_DAVINCI_CPDMA
-	tristate "TI DaVinci CPDMA Support"
-	depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
-	help
-	  This driver supports TI's DaVinci CPDMA dma engine.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called davinci_cpdma.  This is recommended.
-
 config DM9000
 	tristate "DM9000 support"
 	depends on ARM || BLACKFIN || MIPS

@@ -500,31 +469,6 @@ config R6040
 	  To compile this driver as a module, choose M here: the module
 	  will be called r6040. This is recommended.
 
-config TLAN
-	tristate "TI ThunderLAN support"
-	depends on NET_PCI && (PCI || EISA)
-	---help---
-	  If you have a PCI Ethernet network card based on the ThunderLAN chip
-	  which is supported by this driver, say Y and read the
-	  Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  Devices currently supported by this driver are Compaq Netelligent,
-	  Compaq NetFlex and Olicom cards.  Please read the file
-	  <file:Documentation/networking/tlan.txt> for more details.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called tlan.
-
-	  Please email feedback to <torben.mathiasen@compaq.com>.
-
-config CPMAC
-	tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
-	depends on NET_ETHERNET && EXPERIMENTAL && AR7
-	select PHYLIB
-	help
-	  TI AR7 CPMAC Ethernet support
-
 config NET_POCKET
 	bool "Pocket and portable adapters"
 	depends on PARPORT

diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 938484f..96112dd 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile

@@ -5,11 +5,6 @@
 obj-$(CONFIG_MII) += mii.o
 obj-$(CONFIG_MDIO) += mdio.o
 obj-$(CONFIG_PHYLIB) += phy/
-
-obj-$(CONFIG_TI_DAVINCI_EMAC) += davinci_emac.o
-obj-$(CONFIG_TI_DAVINCI_MDIO) += davinci_mdio.o
-obj-$(CONFIG_TI_DAVINCI_CPDMA) += davinci_cpdma.o
-
 obj-$(CONFIG_IP1000) += ipg.o
 obj-$(CONFIG_CAN) += can/
 obj-$(CONFIG_BONDING) += bonding/

@@ -23,7 +18,6 @@ obj-$(CONFIG_PLIP) += plip.o
 
 obj-$(CONFIG_ROADRUNNER) += rrunner.o
 
-obj-$(CONFIG_TLAN) += tlan.o
 obj-$(CONFIG_R6040) += r6040.o
 obj-$(CONFIG_YELLOWFIN) += yellowfin.o
 obj-$(CONFIG_FEALNX) += fealnx.o

@@ -67,7 +61,6 @@ obj-$(CONFIG_IFB) += ifb.o
 obj-$(CONFIG_MACVLAN) += macvlan.o
 obj-$(CONFIG_MACVTAP) += macvtap.o
 obj-$(CONFIG_DEFXX) += defxx.o
-obj-$(CONFIG_CPMAC) += cpmac.o
 obj-$(CONFIG_EQUALIZER) += eql.o
 obj-$(CONFIG_KORINA) += korina.o
 obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o

diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index f53a4bc..3983e70 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig

@@ -63,6 +63,7 @@ source "drivers/net/ethernet/smsc/Kconfig"
 source "drivers/net/ethernet/stmicro/Kconfig"
 source "drivers/net/ethernet/sun/Kconfig"
 source "drivers/net/ethernet/tehuti/Kconfig"
+source "drivers/net/ethernet/ti/Kconfig"
 source "drivers/net/ethernet/toshiba/Kconfig"
 source "drivers/net/ethernet/tundra/Kconfig"
 source "drivers/net/ethernet/via/Kconfig"

diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 4491d84..873d275 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile

@@ -43,6 +43,7 @@ obj-$(CONFIG_NET_VENDOR_SMSC) += smsc/
 obj-$(CONFIG_NET_VENDOR_STMICRO) += stmicro/
 obj-$(CONFIG_NET_VENDOR_SUN) += sun/
 obj-$(CONFIG_NET_VENDOR_TEHUTI) += tehuti/
+obj-$(CONFIG_NET_VENDOR_TI) += ti/
 obj-$(CONFIG_NET_VENDOR_TOSHIBA) += toshiba/
 obj-$(CONFIG_NET_VENDOR_TUNDRA) += tundra/
 obj-$(CONFIG_NET_VENDOR_VIA) += via/

diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
new file mode 100644
index 0000000..1284319
--- /dev/null
+++ b/drivers/net/ethernet/ti/Kconfig

@@ -0,0 +1,76 @@
+#
+# TI device configuration
+#
+
+config NET_VENDOR_TI
+	bool "Texas Instruments (TI) devices"
+	depends on PCI || EISA || AR7 || (ARM && (ARCH_DAVINCI || ARCH_OMAP3))
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about TI devices. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_TI
+
+config TI_DAVINCI_EMAC
+	tristate "TI DaVinci EMAC Support"
+	depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
+	select TI_DAVINCI_MDIO
+	select TI_DAVINCI_CPDMA
+	select PHYLIB
+	---help---
+	  This driver supports TI's DaVinci Ethernet .
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called davinci_emac_driver.  This is recommended.
+
+config TI_DAVINCI_MDIO
+	tristate "TI DaVinci MDIO Support"
+	depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
+	select PHYLIB
+	---help---
+	  This driver supports TI's DaVinci MDIO module.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called davinci_mdio.  This is recommended.
+
+config TI_DAVINCI_CPDMA
+	tristate "TI DaVinci CPDMA Support"
+	depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
+	---help---
+	  This driver supports TI's DaVinci CPDMA dma engine.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called davinci_cpdma.  This is recommended.
+
+config TLAN
+	tristate "TI ThunderLAN support"
+	depends on (PCI || EISA)
+	---help---
+	  If you have a PCI Ethernet network card based on the ThunderLAN chip
+	  which is supported by this driver, say Y and read the
+	  Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Devices currently supported by this driver are Compaq Netelligent,
+	  Compaq NetFlex and Olicom cards.  Please read the file
+	  <file:Documentation/networking/tlan.txt> for more details.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called tlan.
+
+	  Please email feedback to <torben.mathiasen@compaq.com>.
+
+config CPMAC
+	tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && AR7
+	select PHYLIB
+	---help---
+	  TI AR7 CPMAC Ethernet support
+
+endif # NET_VENDOR_TI

diff --git a/drivers/net/ethernet/ti/Makefile b/drivers/net/ethernet/ti/Makefile
new file mode 100644
index 0000000..aedb3af
--- /dev/null
+++ b/drivers/net/ethernet/ti/Makefile

@@ -0,0 +1,9 @@
+#
+# Makefile for the TI network device drivers.
+#
+
+obj-$(CONFIG_TLAN) += tlan.o
+obj-$(CONFIG_CPMAC) += cpmac.o
+obj-$(CONFIG_TI_DAVINCI_EMAC) += davinci_emac.o
+obj-$(CONFIG_TI_DAVINCI_MDIO) += davinci_mdio.o
+obj-$(CONFIG_TI_DAVINCI_CPDMA) += davinci_cpdma.o

diff --git a/drivers/net/cpmac.c b/drivers/net/ethernet/ti/cpmac.c
similarity index 100%
rename from drivers/net/cpmac.c
rename to drivers/net/ethernet/ti/cpmac.c
diff --git a/drivers/net/davinci_cpdma.c b/drivers/net/ethernet/ti/davinci_cpdma.c
similarity index 100%
rename from drivers/net/davinci_cpdma.c
rename to drivers/net/ethernet/ti/davinci_cpdma.c
diff --git a/drivers/net/davinci_cpdma.h b/drivers/net/ethernet/ti/davinci_cpdma.h
similarity index 100%
rename from drivers/net/davinci_cpdma.h
rename to drivers/net/ethernet/ti/davinci_cpdma.h
diff --git a/drivers/net/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
similarity index 100%
rename from drivers/net/davinci_emac.c
rename to drivers/net/ethernet/ti/davinci_emac.c
diff --git a/drivers/net/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c
similarity index 100%
rename from drivers/net/davinci_mdio.c
rename to drivers/net/ethernet/ti/davinci_mdio.c
diff --git a/drivers/net/tlan.c b/drivers/net/ethernet/ti/tlan.c
similarity index 100%
rename from drivers/net/tlan.c
rename to drivers/net/ethernet/ti/tlan.c
diff --git a/drivers/net/tlan.h b/drivers/net/ethernet/ti/tlan.h
similarity index 100%
rename from drivers/net/tlan.h
rename to drivers/net/ethernet/ti/tlan.h
-- 
1.7.6

[net-next 07/10] hamachi/yellowfin: Move the packet engine drivers

From: Jeff Kirsher <hidden>
Date: 2011-08-12 10:52:59

Move the packet engine drivers to drivers/net/ethernet/packetengines/
and the necessary Kconfig and Makefile changes.

CC: Donald Becker <redacted>
Signed-off-by: Jeff Kirsher <redacted>
---
 drivers/net/Kconfig                                |   26 -----------
 drivers/net/Makefile                               |    2 -
 drivers/net/ethernet/Kconfig                       |    1 +
 drivers/net/ethernet/Makefile                      |    1 +
 drivers/net/ethernet/packetengines/Kconfig         |   46 ++++++++++++++++++++
 drivers/net/ethernet/packetengines/Makefile        |    6 +++
 drivers/net/{ => ethernet/packetengines}/hamachi.c |    0
 .../net/{ => ethernet/packetengines}/yellowfin.c   |    0
 8 files changed, 54 insertions(+), 28 deletions(-)
 create mode 100644 drivers/net/ethernet/packetengines/Kconfig
 create mode 100644 drivers/net/ethernet/packetengines/Makefile
 rename drivers/net/{ => ethernet/packetengines}/hamachi.c (100%)
 rename drivers/net/{ => ethernet/packetengines}/yellowfin.c (100%)

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index e8d65fe..99b209e 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig

@@ -541,32 +541,6 @@ config IP1000
 	  To compile this driver as a module, choose M here: the module
 	  will be called ipg.  This is recommended.
 
-config HAMACHI
-	tristate "Packet Engines Hamachi GNIC-II support"
-	depends on PCI
-	select MII
-	help
-	  If you have a Gigabit Ethernet card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module will be
-	  called hamachi.
-
-config YELLOWFIN
-	tristate "Packet Engines Yellowfin Gigabit-NIC support (EXPERIMENTAL)"
-	depends on PCI && EXPERIMENTAL
-	select CRC32
-	---help---
-	  Say Y here if you have a Packet Engines G-NIC PCI Gigabit Ethernet
-	  adapter or the SYM53C885 Ethernet controller. The Gigabit adapter is
-	  used by the Beowulf Linux cluster project.  See
-	  <http://cesdis.gsfc.nasa.gov/linux/drivers/yellowfin.html> for more
-	  information about this driver in particular and Beowulf in general.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called yellowfin.  This is recommended.
-
 config XILINX_LL_TEMAC
 	tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver"
 	depends on PPC || MICROBLAZE

diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 96112dd..d8c286e 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile

@@ -19,7 +19,6 @@ obj-$(CONFIG_PLIP) += plip.o
 obj-$(CONFIG_ROADRUNNER) += rrunner.o
 
 obj-$(CONFIG_R6040) += r6040.o
-obj-$(CONFIG_YELLOWFIN) += yellowfin.o
 obj-$(CONFIG_FEALNX) += fealnx.o
 obj-$(CONFIG_SKFP) += skfp/
 obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o

@@ -30,7 +29,6 @@ obj-$(CONFIG_SH_ETH) += sh_eth.o
 # end link order section
 #
 
-obj-$(CONFIG_HAMACHI) += hamachi.o
 obj-$(CONFIG_NET) += Space.o loopback.o
 obj-$(CONFIG_NET_SB1000) += sb1000.o
 obj-$(CONFIG_HP100) += hp100.o

diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 3983e70..140dd73 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig

@@ -39,6 +39,7 @@ source "drivers/net/ethernet/natsemi/Kconfig"
 source "drivers/net/ethernet/8390/Kconfig"
 source "drivers/net/ethernet/nuvoton/Kconfig"
 source "drivers/net/ethernet/oki-semi/Kconfig"
+source "drivers/net/ethernet/packetengines/Kconfig"
 source "drivers/net/ethernet/pasemi/Kconfig"
 source "drivers/net/ethernet/qlogic/Kconfig"
 source "drivers/net/ethernet/racal/Kconfig"

diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 873d275..8a97b19 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile

@@ -30,6 +30,7 @@ obj-$(CONFIG_NET_VENDOR_MYRI) += myricom/
 obj-$(CONFIG_NET_VENDOR_NATSEMI) += natsemi/
 obj-$(CONFIG_NET_VENDOR_NUVOTON) += nuvoton/
 obj-$(CONFIG_NET_VENDOR_OKI) += oki-semi/
+obj-$(CONFIG_NET_PACKET_ENGINE) += packetengines/
 obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
 obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
 obj-$(CONFIG_NET_VENDOR_RACAL) += racal/

diff --git a/drivers/net/ethernet/packetengines/Kconfig b/drivers/net/ethernet/packetengines/Kconfig
new file mode 100644
index 0000000..4add1db
--- /dev/null
+++ b/drivers/net/ethernet/packetengines/Kconfig

@@ -0,0 +1,46 @@
+#
+# Packet engine device configuration
+#
+
+config NET_PACKET_ENGINE
+	bool "Packet Engine devices"
+	depends on PCI
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about packet engine devices. If you say Y, you will
+	  be asked for your specific card in the following questions.
+
+if NET_PACKET_ENGINE
+
+config HAMACHI
+	tristate "Packet Engines Hamachi GNIC-II support"
+	depends on PCI
+	select MII
+	---help---
+	  If you have a Gigabit Ethernet card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module will be
+	  called hamachi.
+
+config YELLOWFIN
+	tristate "Packet Engines Yellowfin Gigabit-NIC support (EXPERIMENTAL)"
+	depends on PCI && EXPERIMENTAL
+	select CRC32
+	---help---
+	  Say Y here if you have a Packet Engines G-NIC PCI Gigabit Ethernet
+	  adapter or the SYM53C885 Ethernet controller. The Gigabit adapter is
+	  used by the Beowulf Linux cluster project.  See
+	  <http://cesdis.gsfc.nasa.gov/linux/drivers/yellowfin.html> for more
+	  information about this driver in particular and Beowulf in general.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called yellowfin.  This is recommended.
+
+endif # NET_PACKET_ENGINE

diff --git a/drivers/net/ethernet/packetengines/Makefile b/drivers/net/ethernet/packetengines/Makefile
new file mode 100644
index 0000000..995ccd0
--- /dev/null
+++ b/drivers/net/ethernet/packetengines/Makefile

@@ -0,0 +1,6 @@
+#
+# Makefile for the Packet Engine network device drivers.
+#
+
+obj-$(CONFIG_HAMACHI) += hamachi.o
+obj-$(CONFIG_YELLOWFIN) += yellowfin.o

diff --git a/drivers/net/hamachi.c b/drivers/net/ethernet/packetengines/hamachi.c
similarity index 100%
rename from drivers/net/hamachi.c
rename to drivers/net/ethernet/packetengines/hamachi.c
diff --git a/drivers/net/yellowfin.c b/drivers/net/ethernet/packetengines/yellowfin.c
similarity index 100%
rename from drivers/net/yellowfin.c
rename to drivers/net/ethernet/packetengines/yellowfin.c
-- 
1.7.6

[net-next 08/10] octeon: Move the Cavium driver

From: Jeff Kirsher <hidden>
Date: 2011-08-12 10:53:00

Move the Cavium driver to drivers/net/ethernet/octeon/ and
make the necessary Kconfig and Makefile changes.

CC: David Daney <redacted>
Signed-off-by: Jeff Kirsher <redacted>
Acked-by: David Daney <redacted>
---
 drivers/net/Kconfig                             |    2 --
 drivers/net/Makefile                            |    1 -
 drivers/net/ethernet/Kconfig                    |    1 +
 drivers/net/ethernet/Makefile                   |    1 +
 drivers/net/{ => ethernet}/octeon/Kconfig       |    6 +++++-
 drivers/net/ethernet/octeon/Makefile            |    5 +++++
 drivers/net/{ => ethernet}/octeon/octeon_mgmt.c |    0
 drivers/net/octeon/Makefile                     |    2 --
 8 files changed, 12 insertions(+), 6 deletions(-)
 rename drivers/net/{ => ethernet}/octeon/Kconfig (85%)
 create mode 100644 drivers/net/ethernet/octeon/Makefile
 rename drivers/net/{ => ethernet}/octeon/octeon_mgmt.c (100%)
 delete mode 100644 drivers/net/octeon/Makefile

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 99b209e..b896621 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig

@@ -506,8 +506,6 @@ config LANTIQ_ETOP
 	help
 	  Support for the MII0 inside the Lantiq SoC
 
-source "drivers/net/octeon/Kconfig"
-
 endif # NET_ETHERNET
 
 #

diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index d8c286e..648fa5c 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile

@@ -105,5 +105,4 @@ obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
 obj-$(CONFIG_WIMAX) += wimax/
 obj-$(CONFIG_CAIF) += caif/
 
-obj-$(CONFIG_OCTEON_MGMT_ETHERNET) += octeon/
 obj-$(CONFIG_TILE_NET) += tile/

diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 140dd73..70c60ef 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig

@@ -38,6 +38,7 @@ source "drivers/net/ethernet/myricom/Kconfig"
 source "drivers/net/ethernet/natsemi/Kconfig"
 source "drivers/net/ethernet/8390/Kconfig"
 source "drivers/net/ethernet/nuvoton/Kconfig"
+source "drivers/net/ethernet/octeon/Kconfig"
 source "drivers/net/ethernet/oki-semi/Kconfig"
 source "drivers/net/ethernet/packetengines/Kconfig"
 source "drivers/net/ethernet/pasemi/Kconfig"

diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 8a97b19..929ee29 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile

@@ -29,6 +29,7 @@ obj-$(CONFIG_NET_VENDOR_MICREL) += micrel/
 obj-$(CONFIG_NET_VENDOR_MYRI) += myricom/
 obj-$(CONFIG_NET_VENDOR_NATSEMI) += natsemi/
 obj-$(CONFIG_NET_VENDOR_NUVOTON) += nuvoton/
+obj-$(CONFIG_OCTEON_MGMT_ETHERNET) += octeon/
 obj-$(CONFIG_NET_VENDOR_OKI) += oki-semi/
 obj-$(CONFIG_NET_PACKET_ENGINE) += packetengines/
 obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/

diff --git a/drivers/net/octeon/Kconfig b/drivers/net/ethernet/octeon/Kconfig
similarity index 85%
rename from drivers/net/octeon/Kconfig
rename to drivers/net/ethernet/octeon/Kconfig
index 1e56bbf..3de52ff 100644
--- a/drivers/net/octeon/Kconfig
+++ b/drivers/net/ethernet/octeon/Kconfig

@@ -1,10 +1,14 @@
+#
+# Cavium network device configuration
+#
+
 config OCTEON_MGMT_ETHERNET
 	tristate "Octeon Management port ethernet driver (CN5XXX, CN6XXX)"
 	depends on  CPU_CAVIUM_OCTEON
 	select PHYLIB
 	select MDIO_OCTEON
 	default y
-	help
+	---help---
 	  This option enables the ethernet driver for the management
 	  port on Cavium Networks' Octeon CN57XX, CN56XX, CN55XX,
 	  CN54XX, CN52XX, and CN6XXX chips.

diff --git a/drivers/net/ethernet/octeon/Makefile b/drivers/net/ethernet/octeon/Makefile
new file mode 100644
index 0000000..efa41c1
--- /dev/null
+++ b/drivers/net/ethernet/octeon/Makefile

@@ -0,0 +1,5 @@
+#
+# Makefile for the Cavium network device drivers.
+#
+
+obj-$(CONFIG_OCTEON_MGMT_ETHERNET)	+= octeon_mgmt.o

diff --git a/drivers/net/octeon/octeon_mgmt.c b/drivers/net/ethernet/octeon/octeon_mgmt.c
similarity index 100%
rename from drivers/net/octeon/octeon_mgmt.c
rename to drivers/net/ethernet/octeon/octeon_mgmt.c
diff --git a/drivers/net/octeon/Makefile b/drivers/net/octeon/Makefile
deleted file mode 100644
index 906edec..0000000
--- a/drivers/net/octeon/Makefile
+++ /dev/null

@@ -1,2 +0,0 @@
-
-obj-$(CONFIG_OCTEON_MGMT_ETHERNET)	+= octeon_mgmt.o

-- 
1.7.6

[net-next 09/10] jme: Move the JME driver

From: Jeff Kirsher <hidden>
Date: 2011-08-12 10:53:00

Move the JME driver into drivers/net/ethernet/ and make the
necessary Kconfig and Makefile changes.

CC: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: Jeff Kirsher <redacted>
---
 MAINTAINERS                      |    2 +-
 drivers/net/Kconfig              |   12 ------------
 drivers/net/Makefile             |    1 -
 drivers/net/ethernet/Kconfig     |   13 +++++++++++++
 drivers/net/ethernet/Makefile    |    1 +
 drivers/net/{ => ethernet}/jme.c |    0
 drivers/net/{ => ethernet}/jme.h |    0
 7 files changed, 15 insertions(+), 14 deletions(-)
 rename drivers/net/{ => ethernet}/jme.c (100%)
 rename drivers/net/{ => ethernet}/jme.h (100%)

diff --git a/MAINTAINERS b/MAINTAINERS
index 622f4fc..37cbe14 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS

@@ -3591,7 +3591,7 @@ JME NETWORK DRIVER
 M:	Guo-Fu Tseng <cooldavid@cooldavid.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/jme.*
+F:	drivers/net/ethernet/jme.*
 
 JOURNALLING FLASH FILE SYSTEM V2 (JFFS2)
 M:	David Woodhouse <dwmw2@infradead.org>

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index b896621..996bae0 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig

@@ -547,18 +547,6 @@ config XILINX_LL_TEMAC
 	  This driver supports the Xilinx 10/100/1000 LocalLink TEMAC
 	  core used in Xilinx Spartan and Virtex FPGAs
 
-config JME
-	tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
-	depends on PCI
-	select CRC32
-	select MII
-	---help---
-	  This driver supports the PCI-Express gigabit ethernet adapters
-	  based on JMicron JMC250 chipset.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called jme.
-
 endif # NETDEV_1000
 
 #

diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 648fa5c..271fc52 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile

@@ -8,7 +8,6 @@ obj-$(CONFIG_PHYLIB) += phy/
 obj-$(CONFIG_IP1000) += ipg.o
 obj-$(CONFIG_CAN) += can/
 obj-$(CONFIG_BONDING) += bonding/
-obj-$(CONFIG_JME) += jme.o
 obj-$(CONFIG_VMXNET3) += vmxnet3/
 
 #

diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 70c60ef..c29c145 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig

@@ -31,6 +31,19 @@ source "drivers/net/ethernet/ibm/Kconfig"
 source "drivers/net/ethernet/intel/Kconfig"
 source "drivers/net/ethernet/i825xx/Kconfig"
 source "drivers/net/ethernet/xscale/Kconfig"
+
+config JME
+	tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
+	depends on PCI
+	select CRC32
+	select MII
+	---help---
+	  This driver supports the PCI-Express gigabit ethernet adapters
+	  based on JMicron JMC250 chipset.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called jme.
+
 source "drivers/net/ethernet/marvell/Kconfig"
 source "drivers/net/ethernet/mellanox/Kconfig"
 source "drivers/net/ethernet/micrel/Kconfig"

diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 929ee29..8495c50 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile

@@ -23,6 +23,7 @@ obj-$(CONFIG_NET_VENDOR_IBM) += ibm/
 obj-$(CONFIG_NET_VENDOR_INTEL) += intel/
 obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/
 obj-$(CONFIG_NET_VENDOR_XSCALE) += xscale/
+obj-$(CONFIG_JME) += jme.o
 obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/
 obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
 obj-$(CONFIG_NET_VENDOR_MICREL) += micrel/

diff --git a/drivers/net/jme.c b/drivers/net/ethernet/jme.c
similarity index 100%
rename from drivers/net/jme.c
rename to drivers/net/ethernet/jme.c
diff --git a/drivers/net/jme.h b/drivers/net/ethernet/jme.h
similarity index 100%
rename from drivers/net/jme.h
rename to drivers/net/ethernet/jme.h
-- 
1.7.6

[net-next 10/10] xilinx/ll_temac: Move the Xilinx drivers

From: Jeff Kirsher <hidden>
Date: 2011-08-12 10:53:01

Move the Xilinx drivers into drivers/net/ethernet/xilinx/ and
make the necessary Kconfig and Makefile changes.

CC: John Williams <redacted>
CC: "David H. Lynch Jr." <redacted>
Signed-off-by: Jeff Kirsher <redacted>
---
 drivers/net/Kconfig                                |   15 --------
 drivers/net/Makefile                               |    4 --
 drivers/net/ethernet/Kconfig                       |    1 +
 drivers/net/ethernet/Makefile                      |    1 +
 drivers/net/ethernet/xilinx/Kconfig                |   35 ++++++++++++++++++++
 drivers/net/ethernet/xilinx/Makefile               |    7 ++++
 drivers/net/{ => ethernet/xilinx}/ll_temac.h       |    0
 drivers/net/{ => ethernet/xilinx}/ll_temac_main.c  |    0
 drivers/net/{ => ethernet/xilinx}/ll_temac_mdio.c  |    0
 .../net/{ => ethernet/xilinx}/xilinx_emaclite.c    |    0
 10 files changed, 44 insertions(+), 19 deletions(-)
 create mode 100644 drivers/net/ethernet/xilinx/Kconfig
 create mode 100644 drivers/net/ethernet/xilinx/Makefile
 rename drivers/net/{ => ethernet/xilinx}/ll_temac.h (100%)
 rename drivers/net/{ => ethernet/xilinx}/ll_temac_main.c (100%)
 rename drivers/net/{ => ethernet/xilinx}/ll_temac_mdio.c (100%)
 rename drivers/net/{ => ethernet/xilinx}/xilinx_emaclite.c (100%)

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 996bae0..2607a44 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig

@@ -493,13 +493,6 @@ config NET_POCKET
 	  the questions about this class of network devices. If you say Y, you
 	  will be asked for your specific device in the following questions.
 
-config XILINX_EMACLITE
-	tristate "Xilinx 10/100 Ethernet Lite support"
-	depends on PPC32 || MICROBLAZE
-	select PHYLIB
-	help
-	  This driver supports the 10/100 Ethernet Lite from Xilinx.
-
 config LANTIQ_ETOP
 	tristate "Lantiq SoC ETOP driver"
 	depends on SOC_TYPE_XWAY

@@ -539,14 +532,6 @@ config IP1000
 	  To compile this driver as a module, choose M here: the module
 	  will be called ipg.  This is recommended.
 
-config XILINX_LL_TEMAC
-	tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver"
-	depends on PPC || MICROBLAZE
-	select PHYLIB
-	help
-	  This driver supports the Xilinx 10/100/1000 LocalLink TEMAC
-	  core used in Xilinx Spartan and Virtex FPGAs
-
 endif # NETDEV_1000
 
 #

diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 271fc52..4c7af02 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile

@@ -33,10 +33,6 @@ obj-$(CONFIG_NET_SB1000) += sb1000.o
 obj-$(CONFIG_HP100) += hp100.o
 obj-$(CONFIG_FORCEDETH) += forcedeth.o
 
-ll_temac-objs := ll_temac_main.o ll_temac_mdio.o
-obj-$(CONFIG_XILINX_LL_TEMAC) += ll_temac.o
-obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o
-
 obj-$(CONFIG_PPP) += ppp_generic.o
 obj-$(CONFIG_PPP_ASYNC) += ppp_async.o
 obj-$(CONFIG_PPP_SYNC_TTY) += ppp_synctty.o

diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index c29c145..922f4d1 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig

@@ -82,5 +82,6 @@ source "drivers/net/ethernet/ti/Kconfig"
 source "drivers/net/ethernet/toshiba/Kconfig"
 source "drivers/net/ethernet/tundra/Kconfig"
 source "drivers/net/ethernet/via/Kconfig"
+source "drivers/net/ethernet/xilinx/Kconfig"
 
 endif # ETHERNET

diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 8495c50..fcecd5f 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile

@@ -50,3 +50,4 @@ obj-$(CONFIG_NET_VENDOR_TI) += ti/
 obj-$(CONFIG_NET_VENDOR_TOSHIBA) += toshiba/
 obj-$(CONFIG_NET_VENDOR_TUNDRA) += tundra/
 obj-$(CONFIG_NET_VENDOR_VIA) += via/
+obj-$(CONFIG_NET_VENDOR_XILINX) += xilinx/

diff --git a/drivers/net/ethernet/xilinx/Kconfig b/drivers/net/ethernet/xilinx/Kconfig
new file mode 100644
index 0000000..4e3aad4
--- /dev/null
+++ b/drivers/net/ethernet/xilinx/Kconfig

@@ -0,0 +1,35 @@
+#
+# Xilink device configuration
+#
+
+config NET_VENDOR_XILINX
+	bool "Xilinx devices"
+	depends on PPC || PPC32 || MICROBLAZE
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Xilinx devices. If you say Y, you will be asked
+	  for your specific card in the following questions.
+
+if NET_VENDOR_XILINX
+
+config XILINX_EMACLITE
+	tristate "Xilinx 10/100 Ethernet Lite support"
+	depends on (PPC32 || MICROBLAZE)
+	select PHYLIB
+	---help---
+	  This driver supports the 10/100 Ethernet Lite from Xilinx.
+
+config XILINX_LL_TEMAC
+	tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver"
+	depends on (PPC || MICROBLAZE)
+	select PHYLIB
+	---help---
+	  This driver supports the Xilinx 10/100/1000 LocalLink TEMAC
+	  core used in Xilinx Spartan and Virtex FPGAs
+
+endif # NET_VENDOR_XILINX

diff --git a/drivers/net/ethernet/xilinx/Makefile b/drivers/net/ethernet/xilinx/Makefile
new file mode 100644
index 0000000..5feac73
--- /dev/null
+++ b/drivers/net/ethernet/xilinx/Makefile

@@ -0,0 +1,7 @@
+#
+# Makefile for the Xilink network device drivers.
+#
+
+ll_temac-objs := ll_temac_main.o ll_temac_mdio.o
+obj-$(CONFIG_XILINX_LL_TEMAC) += ll_temac.o
+obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o

diff --git a/drivers/net/ll_temac.h b/drivers/net/ethernet/xilinx/ll_temac.h
similarity index 100%
rename from drivers/net/ll_temac.h
rename to drivers/net/ethernet/xilinx/ll_temac.h
diff --git a/drivers/net/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c
similarity index 100%
rename from drivers/net/ll_temac_main.c
rename to drivers/net/ethernet/xilinx/ll_temac_main.c
diff --git a/drivers/net/ll_temac_mdio.c b/drivers/net/ethernet/xilinx/ll_temac_mdio.c
similarity index 100%
rename from drivers/net/ll_temac_mdio.c
rename to drivers/net/ethernet/xilinx/ll_temac_mdio.c
diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
similarity index 100%
rename from drivers/net/xilinx_emaclite.c
rename to drivers/net/ethernet/xilinx/xilinx_emaclite.c
-- 
1.7.6

Re: [net-next 00/10] drivers/net organize Ethernet drivers (5th series)

From: David Miller <davem@davemloft.net>
Date: 2011-08-12 11:35:41

From: Jeff Kirsher <redacted>
Date: Fri, 12 Aug 2011 03:52:41 -0700

This is the fifth of seven 10 patch series to move the Ethernet
drivers into drivers/net/ethernet/
  
The following are changes since commit 4c78893b3d107e2a053c8f51c526510857c09858:
  cnic: Fix select dependencies in bnx2fc/bnx2i Kconfig.
and are available in the git repository at:
  master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/next-organize master

Pulled, thanks Jeff.

RE: [net-next 02/10] cirrus: Move the Cirrus network driver

From: H Hartley Sweeten <hidden>
Date: 2011-08-12 17:29:05

On Friday, August 12, 2011 3:53 AM, Jeff Kirsher wrote:

Move the Cirrus Ethernet driver into drivers/net/ethernet/cirrus/
and make the necessary Kconfig and Makefile changes

CC: Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Jeff Kirsher <redacted>
---
 MAINTAINERS                                       |    2 +-
 drivers/net/arm/Kconfig                           |    8 ------
 drivers/net/arm/Makefile                          |    1 -
 drivers/net/ethernet/Kconfig                      |    1 +
 drivers/net/ethernet/Makefile                     |    1 +
 drivers/net/ethernet/cirrus/Kconfig               |   28 +++++++++++++++++++++
 drivers/net/ethernet/cirrus/Makefile              |    5 +++
 drivers/net/{arm => ethernet/cirrus}/ep93xx_eth.c |    0
 8 files changed, 36 insertions(+), 10 deletions(-)
 create mode 100644 drivers/net/ethernet/cirrus/Kconfig
 create mode 100644 drivers/net/ethernet/cirrus/Makefile
 rename drivers/net/{arm => ethernet/cirrus}/ep93xx_eth.c (100%)

Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>

Will the Kconfig change require an update to ep93xx_defconfig in order to
have CONFIG_EP93XX_ETH selected?

Currently it has these relevant selections:

CONFIG_NET=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_EP93XX_ETH=y

Will CONFIG_NET_VENDOR_CIRRUS need to be added or will kconfig figure out
the dependency automatically?

Regards,
Hartley

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help