Re: [PATCH] net/can: activate bit-timing calculation and netlink based drivers by default
From: Kurt Van Dijck <hidden>
Date: 2011-06-27 13:50:44
Subsystem:
can network drivers, the rest · Maintainers:
Marc Kleine-Budde, Vincent Mailhol, Linus Torvalds
Possibly related (same subject, not in this thread)
- 2011-06-29 · Re: [PATCH] net/can: activate bit-timing calculation and netlink based drivers by default · David Miller <davem@davemloft.net>
- 2011-06-27 · Re: [PATCH] net/can: activate bit-timing calculation and netlink based drivers by default · Kurt Van Dijck <hidden>
- 2011-06-27 · Re: [PATCH] net/can: activate bit-timing calculation and netlink based drivers by default · Marc Kleine-Budde <hidden>
- 2011-06-27 · Re: [PATCH] net/can: activate bit-timing calculation and netlink based drivers by default · Marc Kleine-Budde <hidden>
- 2011-06-27 · Re: [PATCH] net/can: activate bit-timing calculation and netlink based drivers by default · Wolfgang Grandegger <hidden>
Is this modification then also the right thing to do?
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index 1d699e3..ac48574 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig@@ -4,7 +4,6 @@ menu "CAN Device Drivers" config CAN_VCAN tristate "Virtual Local CAN Interface (vcan)" depends on CAN - default N ---help--- Similar to the network loopback devices, vcan offers a virtual local CAN interface.
@@ -15,7 +14,6 @@ config CAN_VCAN config CAN_SLCAN tristate "Serial / USB serial CAN Adaptors (slcan)" depends on CAN - default N ---help--- CAN driver for several 'low cost' CAN interfaces that are attached via serial lines or via USB-to-serial adapters using the LAWICEL
@@ -124,7 +122,6 @@ source "drivers/net/can/softing/Kconfig" config CAN_DEBUG_DEVICES bool "CAN devices debugging messages" depends on CAN - default N ---help--- Say Y here if you want the CAN device drivers to produce a bunch of debug messages to the system log. Select this if you are having