[net-next-2.6 04/13] ixgbe: force unlock on timeout
flat view
STALE5638d
SUPERSEDED
From: Jeff Kirsher <hidden>
Date: 2011-05-15 01:23:51
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Revision v1 of 30 in this series.
Revisions (30)
From: Emil Tantilov <redacted> The semaphore can be in locked state upon driver load, particularly on 82598 if a machine is rebooted due to panic and the semaphore was acquired just prior to the panic. This patch unlocks the semaphore if it times out. Signed-off-by: Emil Tantilov <redacted> Signed-off-by: Jeff Kirsher <redacted> --- drivers/net/ixgbe/ixgbe_common.c | 22 ++++++++++++++++++++++ 1 files changed, 22 insertions(+), 0 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index c4730cd..b894b42 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c@@ -1189,6 +1189,28 @@ static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw) udelay(50); } + if (i == timeout) { + hw_dbg(hw, "Driver can't access the Eeprom - SMBI Semaphore " + "not granted.\n"); + /* + * this release is particularly important because our attempts + * above to get the semaphore may have succeeded, and if there + * was a timeout, we should unconditionally clear the semaphore + * bits to free the driver to make progress + */ + ixgbe_release_eeprom_semaphore(hw); + + udelay(50); + /* + * one last try + * If the SMBI bit is 0 when we read it, then the bit will be + * set and we have the semaphore + */ + swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); + if (!(swsm & IXGBE_SWSM_SMBI)) + status = 0; + } + /* Now get the semaphore between SW/FW through the SWESMBI bit */ if (status == 0) { for (i = 0; i < timeout; i++) {
--
1.7.4.4