[net-next-2.6 01/13] e1000e: minor comment cleanups
flat view
STALE5638d
REVIEWED: 1 (0M)
From: Jeff Kirsher <hidden>
Date: 2011-05-15 01:23:49
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
1 review trailer.
From: Bruce Allan <redacted> Signed-off-by: Bruce Allan <redacted> Tested-by: Aaron Brown <redacted> Signed-off-by: Jeff Kirsher <redacted> --- drivers/net/e1000e/lib.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 6432dda..dd8ab05 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c@@ -144,7 +144,7 @@ void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value) * @hw: pointer to the HW structure * @rar_count: receive address registers * - * Setups the receive address registers by setting the base receive address + * Setup the receive address registers by setting the base receive address * register to the devices MAC address and clearing all the other receive * address registers to 0. **/
@@ -1181,7 +1181,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) * of pause frames. In this case, we had to advertise * FULL flow control because we could not advertise Rx * ONLY. Hence, we must now check to see if we need to - * turn OFF the TRANSMISSION of PAUSE frames. + * turn OFF the TRANSMISSION of PAUSE frames. */ if (hw->fc.requested_mode == e1000_fc_full) { hw->fc.current_mode = e1000_fc_full;
--
1.7.4.4