Re: netfilter: marking IPv6 packets sends them to the wrong interface

On Mon, Jan 24, 2011 at 05:10:50PM +0100, Patrick McHardy wrote:

quoted

Yes, disabling the ip6_route_me_harder() call in ip6t_mangle_out()
results in the advertisements being transmitted on the correct
interfaces

Thanks. The problem appears to be that ip6_route_me_harder()
only uses the socket's oif for the route lookup when the
socket is bound to an interface, but radvd uses IPV6_PKTINFO
to specify the outgoing interface.

I guess netfilter shouldn't be overriding IPV6_PKTINFO, but
we unfortunately have neither an indication of this nor the
original route lookup keys available at the time the packet
is rerouted.

Mh, I'm not sure, but I guess an indication of netfilter not overriding
IPV6_PKTINFO could be the fact that the source address does not
change...

From my 1st mail:
| # ip6tables -t mangle -A OUTPUT -o eth0 -j MARK --set-mark 1
| # /etc/init.d/radvd start
| -> eth0: <no traffic>
| -> eth1: fe80::2a0:c9ff:fee6:90ce > ff02::1: prefix 2001:6f8:90c:10::/64
| -> eth1: fe80::2d0:b7ff:fe06:6b36 > ff02::1: prefix 2001:6f8:90c:12::/64

fe80::2d0:b7ff:fe06:6b36 is the link-local address of eth0 set by radvd
in IPV6_PKTINFO as well. This, of course, is no guarantee for
ipi6_ifindex not being changed, but I believe if something would have
changed it, it would also have changed ipi6_addr.


Mario
-- 
Doing it right is no excuse for not meeting the schedule.
                                -- Plant Manager, Delphi Corporation