RE: [PATCH 2/4] mpc8569mds: Add bscr setting for rtbi mode
From: Liu Yu-B13201 <hidden>
Date: 2010-02-02 05:57:57
Also in:
linuxppc-dev
Thanks. As the patchset is accepted. Will commit another one to fix them.
-----Original Message----- From: glikely@secretlab.ca [mailto:glikely@secretlab.ca] On Behalf Of Grant Likely Sent: Tuesday, February 02, 2010 5:58 AM To: Liu Yu-B13201 Cc: galak@kernel.crashing.org; davem@davemloft.net; netdev@vger.kernel.org; linuxppc-dev@lists.ozlabs.org Subject: Re: [PATCH 2/4] mpc8569mds: Add bscr setting for rtbi mode On Thu, Jan 14, 2010 at 1:13 AM, Liu Yu [off-list ref] wrote:quoted
Signed-off-by: Liu Yu <redacted> --- arch/powerpc/platforms/85xx/mpc85xx_mds.c | 24++++++++++++++++++++++++quoted
1 files changed, 24 insertions(+), 0 deletions(-)diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.cb/arch/powerpc/platforms/85xx/mpc85xx_mds.cquoted
index c5028a2..0872e4a 100644--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c@@ -237,6 +237,8 @@ static void __init mpc85xx_mds_setup_arch(void)} else if (machine_is(mpc8569_mds)) { #define BCSR7_UCC12_GETHnRST (0x1 << 2) #define BCSR8_UEM_MARVELL_RST (0x1 << 1) +#define BCSR_UCC_RGMII (0x1 << 6) +#define BCSR_UCC_RTBI (0x1 << 5) /* * U-Boot mangles interrupt polarityfor Marvell PHYs,quoted
* so reset built-in and UEM MarvellPHYs, this putsquoted
@@ -247,6 +249,28 @@ static void __init mpc85xx_mds_setup_arch(void)setbits8(&bcsr_regs[7],BCSR7_UCC12_GETHnRST);quoted
clrbits8(&bcsr_regs[8],BCSR8_UEM_MARVELL_RST);quoted
+ + for (np = NULL; (np =of_find_compatible_node(np,quoted
+ "network",Don't match on the 'type' field. Replace "network" with NULL and just rely on "ucc_geth" for matching.quoted
+"ucc_geth")) != NULL;) {quoted
+ const unsigned int *prop;u32 please. Also, rather than reusing 'prop' for both char* and u32 values, which forces you to use ugly casts, use 2 local variables here.quoted
+ int ucc_num; + + prop = of_get_property(np,"cell-index", NULL);quoted
+ if (prop == NULL) + continue; + + ucc_num = *prop - 1;Ugh. No bounds checking...quoted
+ + prop = of_get_property(np,"phy-connection-type", NULL);quoted
+ if (prop == NULL) + continue; + + if (strcmp("rtbi", (constchar *)prop) == 0) (This is the ugly cast I was talking about.)quoted
+clrsetbits_8(&bcsr_regs[7 + ucc_num], ...not having bounds checking could result in badness in this array index. This patch is dangerous as written. Finally, while using cell-index seems convenient, I think it would be better to have a lookup table of the index into the BCSR register block from the UCC base address, which also gives you implicit bounds checking. g. -- Grant Likely, B.Sc., P.Eng. Secret Lab Technologies Ltd.