Thread (11 messages) 11 messages, 5 authors, 2010-02-02

Re: [PATCH 2/4] mpc8569mds: Add bscr setting for rtbi mode

From: Grant Likely <hidden>
Date: 2010-02-01 21:57:53
Also in: linuxppc-dev

On Thu, Jan 14, 2010 at 1:13 AM, Liu Yu [off-list ref] wrote:
quoted hunk ↗ jump to hunk
Signed-off-by: Liu Yu <redacted>
---
 arch/powerpc/platforms/85xx/mpc85xx_mds.c |   24 ++++++++++++++++++++++++
 1 files changed, 24 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index c5028a2..0872e4a 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -237,6 +237,8 @@ static void __init mpc85xx_mds_setup_arch(void)
               } else if (machine_is(mpc8569_mds)) {
 #define BCSR7_UCC12_GETHnRST   (0x1 << 2)
 #define BCSR8_UEM_MARVELL_RST  (0x1 << 1)
+#define BCSR_UCC_RGMII         (0x1 << 6)
+#define BCSR_UCC_RTBI          (0x1 << 5)
                       /*
                        * U-Boot mangles interrupt polarity for Marvell PHYs,
                        * so reset built-in and UEM Marvell PHYs, this puts
@@ -247,6 +249,28 @@ static void __init mpc85xx_mds_setup_arch(void)
                       setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
                       clrbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
+
+                       for (np = NULL; (np = of_find_compatible_node(np,
+                                                       "network",
Don't match on the 'type' field.  Replace "network" with NULL and just
rely on "ucc_geth" for matching.
+                                                       "ucc_geth")) != NULL;) {
+                               const unsigned int *prop;
u32 please.

Also, rather than reusing 'prop' for both char* and u32 values, which
forces you to use ugly casts, use 2 local variables here.
+                               int ucc_num;
+
+                               prop = of_get_property(np, "cell-index", NULL);
+                               if (prop == NULL)
+                                       continue;
+
+                               ucc_num = *prop - 1;
Ugh.  No bounds checking...
+
+                               prop = of_get_property(np, "phy-connection-type", NULL);
+                               if (prop == NULL)
+                                       continue;
+
+                               if (strcmp("rtbi", (const char *)prop) == 0)
(This is the ugly cast I was talking about.)
+                                       clrsetbits_8(&bcsr_regs[7 + ucc_num],
...not having bounds checking could result in badness in this array index.

This patch is dangerous as written.

Finally, while using cell-index seems convenient, I think it would be
better to have a lookup table of the index into the BCSR register
block from the UCC base address, which also gives you implicit bounds
checking.

g.

-- 
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help