Re: [PATCH] net: xilinx_emaclite: Fix problem with first incoming packet
From: Grant Likely <hidden>
Date: 2009-09-22 16:54:05
Also in:
linuxppc-dev
On Tue, Sep 22, 2009 at 8:24 AM, John Linn [off-list ref] wrote:
From: Michal Simek <monstr@monstr.eu> You can't ping the board or connect to it unless you send any packet out from board. Tested-by: John Williams <redacted> Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: John Linn <redacted>
John, Since this patch is being *sent* by you, then you should use a "signed-off-by" tag instead because it actually passed through your hands. Oh, and: Acked-by: Grant Likely <redacted>
quoted hunk ↗ jump to hunk
--- drivers/net/xilinx_emaclite.c | 7 ++----- 1 files changed, 2 insertions(+), 5 deletions(-)diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c index dc22782..83a044d 100644 --- a/drivers/net/xilinx_emaclite.c +++ b/drivers/net/xilinx_emaclite.c@@ -134,18 +134,15 @@ static void xemaclite_enable_interrupts(struct net_local *drvdata)} /* Enable the Rx interrupts for the first buffer */ - reg_data = in_be32(drvdata->base_addr + XEL_RSR_OFFSET); out_be32(drvdata->base_addr + XEL_RSR_OFFSET, - reg_data | XEL_RSR_RECV_IE_MASK); + XEL_RSR_RECV_IE_MASK); /* Enable the Rx interrupts for the second Buffer if * configured in HW */ if (drvdata->rx_ping_pong != 0) { - reg_data = in_be32(drvdata->base_addr + XEL_BUFFER_OFFSET + - XEL_RSR_OFFSET); out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET + XEL_RSR_OFFSET, - reg_data | XEL_RSR_RECV_IE_MASK); + XEL_RSR_RECV_IE_MASK); } /* Enable the Global Interrupt Enable */ -- 1.6.2.1 This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.
-- Grant Likely, B.Sc., P.Eng. Secret Lab Technologies Ltd.