[PATCH 0/7] sky2 version 1.15 (88e8071) support · Stephen Hemminger <hidden> · 2007-06-05
[PATCH 1/7] sky2: avoid reserved regions on ethtool reg dump · Stephen Hemminger <hidden> · 2007-06-05
Re: [PATCH 1/7] sky2: avoid reserved regions on ethtool reg dump · Jeff Garzik <hidden> · 2007-06-13
[PATCH 3/7] sky2: rename BMU register · Stephen Hemminger <hidden> · 2007-06-05
[PATCH 5/7] sky2: GPIO register · Stephen Hemminger <hidden> · 2007-06-05
[PATCH 4/7] sky2: enable clocks before probe · Stephen Hemminger <hidden> · 2007-06-05
[PATCH 2/7] sky2: Add PCI device specfic register 4 & 5 · Stephen Hemminger <hidden> · 2007-06-05
[PATCH 7/7] sky2: version 1.15 · Stephen Hemminger <hidden> · 2007-06-05
[PATCH 6/7] sky2: Yukon Extreme (88e8071) support. · Stephen Hemminger <hidden> · 2007-06-05
Re: [PATCH 0/7] sky2 version 1.15 (88e8071) support · Jeff Garzik <hidden> · 2007-06-13
Re: [PATCH 0/7] sky2 version 1.15 (88e8071) support · Stephen Hemminger <hidden> · 2007-06-13

Re: [PATCH 0/7] sky2 version 1.15 (88e8071) support

From: Jeff Garzik <hidden>
Date: 2007-06-13 20:05:26

Stephen Hemminger wrote:

These changes are to enable the Yukon Extreme (88e8071)
chipset. This chip is similar to earlier chip but has a different
set of offloading operations and some other minor quirks.

Marvell has given me some evaluation boards with the 88e8071
chip set. The chip is available now, but haven't seen a systems
with the hardware yet. The support fot this is exprerimental
at this point, but haven't encountered any new problems.

Just to confirm... these are all for #upstream (2.6.23), correct?

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help