On Mon, 14 Aug 2006 16:38:47 +0200
Laurent Riffard [off-list ref] wrote:

Le 13.08.2006 10:24, Andrew Morton a __crit :

quoted

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.18-rc4/2.6.18-rc4-mm1/

Hello,

This morning, while trying to suspend to disk, my box started to loop 
displaying the following message:
eth0: trigger_send() called with the transmitter busy.

Here is the scenario. I booted 2.6.18-rc4-mm1 with this command line:
root=/dev/vglinux1/lvroot video=vesafb:ywrap,mtrr splash=silent resume=/dev/hdb7 netconsole=@192.163.0.3/,@192.168.0.1/00:0E:9B:91:ED:72 init 1

Then I issued:
# echo 6 > /proc/sys/kernel/printk
# echo disk > /sys/power/state

ne2k isn't <ahem> the most actively-maintained driver.

But most (I think all) net drivers have problems during suspend when
netconsole is active.  Does disabling netconsole help?

Did this operation work OK in earlier kernels, with netconsole enabled?