[PATCH v5 02/58] objtool/klp: Check the klp test environment once, before any test

@@ -152,7 +152,8 @@ mrproper: clean
 	$(call QUIET_CLEAN, objtool) $(RM) $(OBJTOOL)
 
 tests: $(OBJTOOL)
-	$(Q)OBJTOOL=$(abspath $(OBJTOOL)) $(srctree)/tools/objtool/tests/run-tests.sh
+	$(Q)OBJTOOL=$(abspath $(OBJTOOL)) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) \
+		$(srctree)/tools/objtool/tests/run-tests.sh
 
 FORCE:
 

@@ -11,8 +11,104 @@
 TESTS_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
 FIXTURES_DIR="$TESTS_DIR/fixtures"
 
+# The kernel's convention: CROSS_COMPILE is the one knob, with per-tool
+# overrides for what it does not cover.  objtool itself is always a host binary
+# -- it is built with HOSTCC and only reads ELF -- so an arm64 machine can run
+# the x86 tests against x86 objects given a compiler that emits them.
+#
+# readelf reads any target, so it rarely needs overriding, and either GNU
+# readelf or llvm-readelf will do: the assertions match on fields rather than
+# on columns, and where the two spell something differently -- "OS [0xff20]"
+# against "OS[0xff20]" for SHN_LIVEPATCH -- they accept both.  BFD's objcopy is
+# usually built for the host's target alone, and llvm-objcopy is the
+# target-agnostic replacement.
+CROSS_COMPILE="${CROSS_COMPILE:-}"
+CC="${CC:-${CROSS_COMPILE}gcc}"
+LD="${LD:-${CROSS_COMPILE}ld}"
+READELF="${READELF:-${CROSS_COMPILE}readelf}"
+OBJCOPY="${OBJCOPY:-${CROSS_COMPILE}objcopy}"
+
 OBJTOOL="${OBJTOOL:-$TESTS_DIR/../objtool}"
-CC="${CC:-gcc}"
+
+# klp_preflight
+#
+# Check the environment once, before any test runs, and report what was found.
+#
+klp_preflight()
+{
+	local tmp tool cc_version host cc_arch
+
+	bail() { echo "Bail out! $*" >&2; exit 1; }
+
+	# A relative $OBJTOOL is relative to the objtool directory, not tests/.
+	[ -x "$OBJTOOL" ] || [ ! -x "$TESTS_DIR/../$OBJTOOL" ] ||
+		OBJTOOL="$TESTS_DIR/../$OBJTOOL"
+
+	[ -x "$OBJTOOL" ] ||
+		bail "objtool not found at '$OBJTOOL' -- build it first"
+
+	# run_diff() runs objtool from inside the test's working directory, so
+	# a relative path would resolve against that instead.
+	OBJTOOL="$(realpath "$OBJTOOL")"
+
+	"$OBJTOOL" klp 2>&1 | grep -q checksum ||
+		bail "objtool was built without klp support; install libxxhash (>= 0.8) and rebuild"
+
+	command -v "${CC%% *}" >/dev/null || bail "compiler not found: $CC"
+
+	for tool in "$READELF" "$OBJCOPY" "$LD"; do
+		command -v "${tool%% *}" >/dev/null || bail "$tool not found"
+	done
+
+	tmp="$(mktemp -d)" || bail "mktemp failed"
+	echo 'int probe(void) { return 0; }' > "$tmp/probe.c"
+	$CC -c -o "$tmp/probe.o" "$tmp/probe.c" 2>/dev/null ||
+		{ rm -rf "$tmp"; bail "$CC cannot compile a trivial object"; }
+
+	# $CC, $ARCH and objtool have to agree about the target, and cross runs
+	# are where they stop agreeing: plain "CC=clang ARCH=x86_64" on an arm64
+	# box selects the x86 tests and then builds arm64 objects, because clang
+	# needs --target= to emit anything but the host's.
+	#
+	# Ask objtool rather than comparing machine names.  It rejects an object
+	# it was not built for -- "unexpected ELF machine type" -- so one check
+	# covers every way the three can disagree, and says so once instead of
+	# failing every test for the same reason.
+	"$OBJTOOL" klp checksum "$tmp/probe.o" >/dev/null 2>&1 ||
+		{ rm -rf "$tmp"
+		  bail "objtool rejects an object built by '$CC'; they target" \
+		       "different architectures (set CROSS_COMPILE, or" \
+		       "--target= for clang)"; }
+
+	# BFD objcopy is usually built for the host's target alone, and
+	# checksum_of() needs it to read the object under test.
+	$OBJCOPY -O binary --only-section=.text "$tmp/probe.o" "$tmp/probe.bin" 2>/dev/null ||
+		{ rm -rf "$tmp"
+		  bail "$OBJCOPY cannot read objects built by '$CC'; install" \
+		       "binutils-multiarch or set OBJCOPY=llvm-objcopy"; }
+	# $ARCH only chooses which directory of tests runs, so it can disagree
+	# with what $CC builds without objtool noticing -- and the result is the
+	# wrong set of tests, quietly.
+	case "$($READELF -hW "$tmp/probe.o" | sed -n 's/.*Machine: *//p')" in
+	*X86-64*|*Intel*80386*)	cc_arch=x86 ;;
+	*AArch64*)		cc_arch=arm64 ;;
+	*)			cc_arch= ;;
+	esac
+	rm -rf "$tmp"
+
+	KLP_TEST_PREFLIGHT=done
+	export OBJTOOL CC KLP_TEST_PREFLIGHT
+
+	cc_version="$($CC --version 2>/dev/null | head -1)"
+	cat <<EOF
+# preflight
+#   objtool   $OBJTOOL (klp: yes)
+#   compiler  $cc_version
+#   arch      $KLP_TEST_ARCH$([ "$arch" = "$host" ] || echo "  (host $host, cross)")
+EOF
+}
+
+[ -n "${KLP_TEST_PREFLIGHT:-}" ] || klp_preflight
 
 # klp-build compiles the kernel this way; klp diff needs per-symbol sections to
 # extract individual functions.

@@ -30,23 +126,9 @@ cleanup() { [ -n "$workdir" ] && rm -rf "$workdir"; }
 # setup [exported symbol...]
 setup()
 {
-	# A relative $OBJTOOL is relative to the objtool directory, not to the
-	# tests which run from tests/.
-	[ -x "$OBJTOOL" ] || [ ! -x "$TESTS_DIR/../$OBJTOOL" ] ||
-		OBJTOOL="$TESTS_DIR/../$OBJTOOL"
-
-	# Not finding objtool is a broken invocation, not an environment which
-	# cannot run the test.  Skipping here would read as a pass.
-	[ -x "$OBJTOOL" ] || fail "objtool not found at '$OBJTOOL', build it first"
-
-	# run_diff() runs objtool from inside the test's working directory, so
-	# a relative path would resolve against that instead.
-	OBJTOOL="$(realpath "$OBJTOOL")"
-
-	"$OBJTOOL" klp 2>&1 | grep -q checksum ||
-		skip "objtool built without klp support (needs libxxhash)"
-	command -v "${CC%% *}" >/dev/null || skip "no compiler ($CC)"
-
+	# The environment was checked once when this file was sourced, so there
+	# is nothing to verify here: objtool exists at the resolved path, has
+	# klp support, and $CC works.
 	workdir="$(mktemp -d)" || fail "mktemp failed"
 	trap cleanup EXIT
 

@@ -155,9 +237,9 @@ find_thinlto_toolchain()
 	return 1
 }
 
-out_sections() { readelf -S -W "$workdir/out.o" 2>/dev/null; }
-out_relocs()   { readelf -r -W "$workdir/out.o" 2>/dev/null; }
-out_symbols()  { readelf -s -W "$workdir/out.o" 2>/dev/null; }
+out_sections() { $READELF -S -W "$workdir/out.o" 2>/dev/null; }
+out_relocs()   { $READELF -r -W "$workdir/out.o" 2>/dev/null; }
+out_symbols()  { $READELF -s -W "$workdir/out.o" 2>/dev/null; }
 diff_log()     { cat "$workdir/diff.log"; }
 
 assert_section()

@@ -2,6 +2,9 @@
 # SPDX-License-Identifier: GPL-2.0
 #
 # Run the objtool klp tests.  Each test-*.sh prints one TAP result line.
+#
+# The harness checks the environment once up front and fails the run if the
+# suite cannot execute, rather than letting every test skip and exit 0.
 
 set -u
 

@@ -10,6 +13,10 @@ cd "$(dirname "$0")" || exit 1
 tests=( test-*.sh )
 [ "${tests[0]}" = "test-*.sh" ] && { echo "1..0 # SKIP no tests found"; exit 0; }
 
+# Sourcing the harness runs its preflight, and exports what it found so the
+# tests inherit it rather than working it out again.
+. ./lib.sh
+
 echo "1..${#tests[@]}"
 
 rc=0