[PATCH 10/58] objtool: Keep failing test workdirs by default

@@ -199,10 +199,11 @@ source layout::
         generic/test-basic/{orig.o,patched.o,out.o,Module.symvers,...}
         x86/test-kcfi/...
 
-``--keep`` leaves it and reports the one path.  Otherwise each test removes its
-own directory and the runner ``rmdir``s the run's -- which fails if anything
-was left behind, so a test which dies without cleaning up is reported rather
-than silently leaking.
+By default (``KEEP=failed``) only failing tests keep their directories; the
+runner reports where they are.  ``KEEP=all`` keeps every test's directory;
+``KEEP=none`` removes them all.  The runner ``rmdir``s the run directory when
+it is empty -- which fails if anything was left behind unexpectedly, so a test
+which dies without cleaning up is reported rather than silently leaking.
 
 
 Running

@@ -216,7 +217,10 @@ Running
     CC=clang make -C tools/objtool tests  # the other toolchain
     LLVM=1 make -C tools/objtool tests    # and its binutils too
 
-    tools/objtool/tests/run-tests.sh --keep basic   # one test, keep its objects
+    make -C tools/objtool tests KEEP=all    # keep every test's workdir
+    make -C tools/objtool tests KEEP=none   # remove all workdirs
+
+    tools/objtool/tests/run-tests.sh basic  # one test; failures kept by default
 
 A run covers one compiler and one architecture; CI runs the combinations.
 

@@ -153,7 +153,7 @@ mrproper: clean
 
 tests: $(OBJTOOL)
 	$(Q)OBJTOOL=$(abspath $(OBJTOOL)) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) \
-		$(srctree)/tools/objtool/tests/run-tests.sh
+		KEEP=$(KEEP) $(srctree)/tools/objtool/tests/run-tests.sh
 
 FORCE:
 

@@ -149,7 +149,7 @@ orig_obj=orig.o
 patched_obj=patched.o
 
 pass() { echo "ok - $test_name${1:+: $1}"; exit 0; }
-fail() { echo "not ok - $test_name: $1"; exit 1; }
+fail() { KLP_TEST_FAILED=1; echo "not ok - $test_name: $*"; exit 1; }
 
 # Two kinds of skip, and the runner tells them apart.
 #

@@ -178,6 +178,7 @@ xfail()
 
 xpass()
 {
+	KLP_TEST_FAILED=1
 	echo "ok - $test_name${1:+: $1} # TODO expected failure, but passed"
 	exit 1
 }

@@ -186,12 +187,14 @@ cleanup()
 {
 	[ -n "$workdir" ] || return 0
 
-	if [ -n "${KLP_TEST_KEEP:-}" ]; then
-		[ -n "${KLP_TEST_WORKDIR:-}" ] || echo "# kept $workdir"
-		return 0
-	fi
-
-	rm -rf "$workdir"
+	case "${KLP_TEST_KEEP:-failed}" in
+	all)	return 0 ;;
+	none)	rm -rf "$workdir" ;;
+	failed|*)
+		[ -n "${KLP_TEST_FAILED:-}" ] && return 0
+		rm -rf "$workdir"
+		;;
+	esac
 }
 
 # setup [exported symbol...]

@@ -31,13 +31,15 @@ A test may be named with or without its "test-" prefix and ".sh" suffix, and is
 looked for in both directories.
 
 Options:
-    -k, --keep    do not delete each test's working directory; print its path,
-                  so the objects a failing test built can be looked at
+    -k, --keep    same as KEEP=all (see below)
 
 Environment:
     OBJTOOL       objtool binary to test (default ../objtool)
     CC            compiler used to build fixtures (default gcc)
     ARCH          architecture the tests are for (default: uname -m)
+    KEEP          failed  keep only failing tests (default)
+                  all     keep every test's working directory
+                  none    remove all working directories
 
 A test which needs something of its own says so in its skip message.
 EOF

@@ -46,16 +48,28 @@ EOF
 
 cd "$(dirname "$0")" || exit 1
 
+keep_from_args=
 while [ $# -gt 0 ]; do
 	case "$1" in
 	-h|--help)	usage ;;
-	-k|--keep)	export KLP_TEST_KEEP=1; shift ;;
+	-k|--keep)	keep_from_args=all; shift ;;
 	--)		shift; break ;;
 	-*)		echo "unknown option: $1" >&2; usage 1 ;;
 	*)		break ;;
 	esac
 done
 
+KLP_TEST_KEEP="${KEEP:-failed}"
+[ -n "$keep_from_args" ] && KLP_TEST_KEEP="$keep_from_args"
+case "$KLP_TEST_KEEP" in
+all|none|failed) ;;
+*)
+	echo "invalid KEEP=$KLP_TEST_KEEP (want failed, all, or none)" >&2
+	exit 1
+	;;
+esac
+export KLP_TEST_KEEP
+
 echo "TAP version 13"
 
 # Sourcing the harness runs its preflight, which decides which architecture

@@ -112,6 +126,7 @@ rundir="$(mktemp -d "${TMPDIR:-/tmp}/klp-tests.XXXXXXXX")" ||
 echo "1..${#tests[@]}"
 
 pass=0 fail=0 static_skip=0 probe_skip=0 xfail=0 xpass=0
+failed_dirs=()
 
 for t in "${tests[@]}"; do
 	out="$(KLP_TEST_WORKDIR="$rundir/${t%.sh}" ./"$t" 2>&1)"

@@ -147,16 +162,16 @@ for t in "${tests[@]}"; do
 		rest="$rest${rest:+$'\n'}was: $result"
 		result="not ok - $(basename "$t" .sh): undeclared skip"
 		result="$result (use gcc_only/clang_only or require_input_*)"
-		fail=$((fail + 1)) ;;
+		fail=$((fail + 1)); failed_dirs+=( "$rundir/${t%.sh}" ) ;;
 	"not ok"*"# TODO"*)	xfail=$((xfail + 1)) ;;
-	"ok"*"# TODO"*)		xpass=$((xpass + 1)) ;;
-	"not ok"*)		fail=$((fail + 1)) ;;
+	"ok"*"# TODO"*)		xpass=$((xpass + 1)); failed_dirs+=( "$rundir/${t%.sh}" ) ;;
+	"not ok"*)		fail=$((fail + 1)); failed_dirs+=( "$rundir/${t%.sh}" ) ;;
 	"ok"*)			pass=$((pass + 1)) ;;
 	*)
 		# No result line at all: the test died before reporting.
 		rest="$rest${rest:+$'\n'}exited $rc without a result line"
 		result="not ok - $(basename "$t" .sh): no TAP result"
-		fail=$((fail + 1)) ;;
+		fail=$((fail + 1)); failed_dirs+=( "$rundir/${t%.sh}" ) ;;
 	esac
 
 	echo "$result"

@@ -167,15 +182,35 @@ done
 echo "# pass:$pass fail:$fail static-skip:$static_skip" \
      "probe-skip:$probe_skip xfail:$xfail xpass:$xpass"
 
-# A failure is the one time the objects matter, and by default they are
-# already gone.  Say so then rather than in the usage text nobody reads while
-# something is broken.
-if [ -n "${KLP_TEST_KEEP:-}" ]; then
-	echo "# working directories kept in $rundir -- inspect, then rm -rf it"
-elif ! rmdir "$rundir"/*/ "$rundir" 2>/dev/null; then
-	echo "# $rundir was not empty; a test did not clean up after itself"
-elif [ "$fail" != 0 ] || [ "$xpass" != 0 ]; then
-	echo "# re-run with --keep to hold on to what a failing test built"
-fi
+case "$KLP_TEST_KEEP" in
+all)
+	echo "# keep=all: workdirs kept in $rundir"
+	echo "# inspect: diff.log, readelf -S out.o under each test-* subdirectory"
+	echo "# cleanup: rm -rf $rundir"
+	;;
+failed)
+	if [ "${#failed_dirs[@]}" -gt 0 ]; then
+		echo "# keep=failed: ${#failed_dirs[@]} failing test(s) kept under $rundir:"
+		for d in "${failed_dirs[@]}"; do
+			echo "#   ${d#"$rundir"/}/"
+		done
+		echo "# inspect: diff.log  readelf -S out.o"
+		echo "# one test: $PWD/run-tests.sh <name>"
+		echo "# cleanup: rm -rf $rundir"
+	elif ! rmdir "$rundir" 2>/dev/null; then
+		echo "# $rundir was not empty; a test did not clean up after itself"
+	fi
+	;;
+none)
+	if ! rmdir "$rundir"/*/ "$rundir" 2>/dev/null; then
+		if [ "$fail" != 0 ] || [ "$xpass" != 0 ]; then
+			echo "# keep=none: artifacts were removed" \
+			     "(re-run with KEEP=failed or KEEP=all)"
+		elif [ -d "$rundir" ]; then
+			echo "# $rundir was not empty; a test did not clean up after itself"
+		fi
+	fi
+	;;
+esac
 
 [ "$fail" = 0 ] && [ "$xpass" = 0 ]