On Wed, 26 Feb 2025 18:01:41 +0100, J. Neuschäfer wrote:
Formalize the binding already supported by the fsl_elbc_nand.c driver
and used in several device trees in arch/powerpc/boot/dts/.
raw-nand-chip.yaml is referenced in order to accommodate situations in
which the ECC parameters settings are set in the device tree. One such
example is in arch/powerpc/boot/dts/turris1x.dts:
/* MT29F2G08ABAEAWP:E NAND */
nand@1,0 {
compatible = "fsl,p2020-fcm-nand", "fsl,elbc-fcm-nand";
reg = <0x1 0x0 0x00040000>;
nand-ecc-mode = "soft";
nand-ecc-algo = "bch";
partitions { ... };
};
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: J. Neuschäfer <redacted>
---
V3:
- remove unnecessary #address/size-cells from nand node in example
- add Frank Li's review tag
- add missing end of document marker (...)
- explain choice to reference raw-nand-chip.yaml
V2:
- split out from fsl,elbc binding patch
- constrain #address-cells and #size-cells
- add a general description
- use unevaluatedProperties=false instead of additionalProperties=false
- fix property order to comply with dts coding style
- include raw-nand-chip.yaml instead of nand-chip.yaml
---
.../devicetree/bindings/mtd/fsl,elbc-fcm-nand.yaml | 68 ++++++++++++++++++++++
1 file changed, 68 insertions(+)
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mtd/fsl,elbc-fcm-nand.example.dtb: nand@1,0: $nodename:0: 'nand@1,0' does not match '^nand@[a-f0-9]$'
from schema $id: http://devicetree.org/schemas/mtd/fsl,elbc-fcm-nand.yaml#
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250226-ppcyaml-elbc-v3-2-a90ed71da838@posteo.net
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.