[PATCH v6 8/8] PCI/AER: Add prefixes to printouts
From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Date: 2024-09-13 14:38:17
Also in:
linux-pci, lkml
Subsystem:
pci enhanced error handling (eeh) for powerpc, pci subsystem, the rest · Maintainers:
Mahesh J Salgaonkar, Bjorn Helgaas, Linus Torvalds
Only part of the AER diagnostic printouts use "AER:" prefix because they use low-level pci_printk() directly to allow selecting level. Add "AER:" prefix to lines that are printed with pci_printk(). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> --- drivers/pci/pcie/aer.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index 6484e3a66a41..c4ba4396a8dc 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c@@ -685,8 +685,8 @@ static void __aer_print_error(struct pci_dev *dev, if (!errmsg) errmsg = "Unknown Error Bit"; - pci_printk(level, dev, " [%2d] %-22s%s\n", i, errmsg, - info->first_error == i ? " (First)" : ""); + pci_printk(level, dev, "%s [%2d] %-22s%s\n", dev_fmt(""), i, + errmsg, info->first_error == i ? " (First)" : ""); } pci_dev_aer_stats_incr(dev, info); }
@@ -708,12 +708,12 @@ void aer_print_error(struct pci_dev *dev, struct aer_err_info *info) level = (info->severity == AER_CORRECTABLE) ? KERN_WARNING : KERN_ERR; - pci_printk(level, dev, "PCIe Bus Error: severity=%s, type=%s, (%s)\n", - aer_error_severity_string[info->severity], + pci_printk(level, dev, "%sPCIe Bus Error: severity=%s, type=%s, (%s)\n", + dev_fmt(""), aer_error_severity_string[info->severity], aer_error_layer[layer], aer_agent_string[agent]); - pci_printk(level, dev, " device [%04x:%04x] error status/mask=%08x/%08x\n", - dev->vendor, dev->device, info->status, info->mask); + pci_printk(level, dev, "%s device [%04x:%04x] error status/mask=%08x/%08x\n", + dev_fmt(""), dev->vendor, dev->device, info->status, info->mask); __aer_print_error(dev, info);
--
2.39.2