Re: [PATCH v9 08/10] arm64: dts: ls1088a: Add serdes bindings
From: Shawn Guo <shawnguo@kernel.org>
Date: 2023-01-25 23:48:59
Also in:
linux-arm-kernel, linux-devicetree, linux-phy
On Thu, Dec 29, 2022 at 07:01:37PM -0500, Sean Anderson wrote:
quoted hunk ↗ jump to hunk
This adds bindings for the SerDes devices. They are disabled by default to prevent any breakage on existing boards. Signed-off-by: Sean Anderson <redacted> --- (no changes since v4) Changes in v4: - Convert to new bindings Changes in v3: - New arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index 260d045dbd9a..ecf9d830e36f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi@@ -238,6 +238,24 @@ reset: syscon@1e60000 { reg = <0x0 0x1e60000 0x0 0x10000>; }; + serdes1: serdes@1ea0000 { + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + compatible = "fsl,ls1088a-serdes", "fsl,lynx-10g"; + reg = <0x0 0x1ea0000 0x0 0x2000>;
Can we start the properties with compatible (and reg) like most of other device nodes? Shawn
+ status = "disabled";
+ };
+
+ serdes2: serdes@1eb0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <1>;
+ compatible = "fsl,ls1088a-serdes", "fsl,lynx-10g";
+ reg = <0x0 0x1eb0000 0x0 0x2000>;
+ status = "disabled";
+ };
+
isc: syscon@1f70000 {
compatible = "fsl,ls1088a-isc", "syscon";
reg = <0x0 0x1f70000 0x0 0x10000>;
--
2.35.1.1320.gc452695387.dirty