On 9/28/22 3:39 AM, Sathyanarayanan Kuppuswamy wrote:

On 9/27/22 8:35 AM, Zhuo Chen wrote:

quoted

Status bits for ERR_NONFATAL errors only are cleared in
pci_aer_clear_nonfatal_status(), but we want clear uncorrectable
error status in idt_init_pci(), so we change to use
pci_aer_clear_uncorrect_error_status().

You mean currently driver does not clear fatal errors now, and it is
a problem? Any error reported?

Hi Sathyanarayanan,

No error reports yet, I just changes the behavior back to what it was 
before commit e7b0b847de6d ("PCI/AER: Clear only ERR_NONFATAL bits 
during non-fatal recovery"), because this commit change the original 
function in commit bf2a952d31d2 ("NTB: Add IDT 89HPESxNTx PCIe-switches 
support").

Also, I am wondering why is it required to clear errors during init
code. Is it a norm?

I think there is no need to clear errors during init code.

quoted

Signed-off-by: Zhuo Chen <redacted>
---
  drivers/ntb/hw/idt/ntb_hw_idt.c | 4 ++--
  1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/ntb/hw/idt/ntb_hw_idt.c b/drivers/ntb/hw/idt/ntb_hw_idt.c
index 0ed6f809ff2e..d5f0aa87f817 100644
--- a/drivers/ntb/hw/idt/ntb_hw_idt.c
+++ b/drivers/ntb/hw/idt/ntb_hw_idt.c

@@ -2657,8 +2657,8 @@ static int idt_init_pci(struct idt_ntb_dev *ndev)
  	ret = pci_enable_pcie_error_reporting(pdev);
  	if (ret != 0)
  		dev_warn(&pdev->dev, "PCIe AER capability disabled\n");
-	else /* Cleanup nonfatal error status before getting to init */
-		pci_aer_clear_nonfatal_status(pdev);
+	else /* Cleanup uncorrectable error status before getting to init */
+		pci_aer_clear_uncorrect_error_status(pdev);
  
  	/* First enable the PCI device */
  	ret = pcim_enable_device(pdev);

-- 
Thanks,
Zhuo Chen