[PATCH] powerpc: dts: t1040rdb: fix ports names for Seville Ethernet switch
From: Maxim Kiselev <hidden>
Date: 2021-12-30 10:43:49
Also in:
linux-devicetree, lkml
Subsystem:
linux for powerpc (32-bit and 64-bit), the rest · Maintainers:
Madhavan Srinivasan, Linus Torvalds
Fix network interface names for the switch ports according to labels
that are written on the front panel of the board. They start from ETH3
and end at ETH10.
Fixes: e69eb0824d8c ("powerpc: dts: t1040rdb: add ports for Seville
Ethernet switch")
Signed-off-by: Maxim Kiselev <redacted>
Reviewed-by: Maxim Kochetkov <redacted>
---
arch/powerpc/boot/dts/fsl/t1040rdb.dts | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/boot/dts/fsl/t1040rdb.dts b/arch/powerpc/boot/dts/fsl/t1040rdb.dts
index af0c8a6f56138..b6733e7e65805 100644
--- a/arch/powerpc/boot/dts/fsl/t1040rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t1040rdb.dts@@ -119,7 +119,7 @@ &seville_port0 { managed = "in-band-status"; phy-handle = <&phy_qsgmii_0>; phy-mode = "qsgmii"; - label = "ETH5"; + label = "ETH3"; status = "okay"; };
@@ -135,7 +135,7 @@ &seville_port2 { managed = "in-band-status"; phy-handle = <&phy_qsgmii_2>; phy-mode = "qsgmii"; - label = "ETH7"; + label = "ETH5"; status = "okay"; };
@@ -151,7 +151,7 @@ &seville_port4 { managed = "in-band-status"; phy-handle = <&phy_qsgmii_4>; phy-mode = "qsgmii"; - label = "ETH9"; + label = "ETH7"; status = "okay"; };
@@ -167,7 +167,7 @@ &seville_port6 { managed = "in-band-status"; phy-handle = <&phy_qsgmii_6>; phy-mode = "qsgmii"; - label = "ETH11"; + label = "ETH9"; status = "okay"; };
--
2.32.0