[PATCH v4 4/5] powerpc: wii.dts: Expose the OTP on this platform
flat view
STALE1882d
LANDED
From: Emmanuel Gil Peyrot <hidden>
Date: 2021-08-01 07:38:58
Also in:
linux-devicetree, lkml
Subsystem:
linux for powerpc (32-bit and 64-bit), the rest · Maintainers:
Madhavan Srinivasan, Linus Torvalds
Revision v4 of 3 in this series; landed in mainline as 562a610b4c51 on 2021-08-13.
Revisions (3)
- v2 [diff vs current]
- v3 [diff vs current]
- v4 current
This can be used by the newly-added nintendo-otp nvmem module. Signed-off-by: Emmanuel Gil Peyrot <redacted> --- arch/powerpc/boot/dts/wii.dts | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/boot/dts/wii.dts b/arch/powerpc/boot/dts/wii.dts
index c5fb54f8cc02..e9c945b123c6 100644
--- a/arch/powerpc/boot/dts/wii.dts
+++ b/arch/powerpc/boot/dts/wii.dts@@ -219,12 +219,17 @@ control@d800100 { /* * Both the address and length are wrong, according to * Wiibrew this should be <0x0d800000 0x400>, but it - * requires refactoring the PIC1 and GPIO nodes before - * changing that. + * requires refactoring the PIC1, GPIO and OTP nodes + * before changing that. */ reg = <0x0d800100 0xa0>; }; + otp@d8001ec { + compatible = "nintendo,hollywood-otp"; + reg = <0x0d8001ec 0x8>; + }; + disk@d806000 { compatible = "nintendo,hollywood-di"; reg = <0x0d806000 0x40>;
--
2.32.0