On Fri, Apr 16, 2021 at 2:30 AM Michael Walle [off-list ref] wrote:
Am 2021-04-16 05:24, schrieb Benjamin Herrenschmidt:
quoted
On Mon, 2021-04-12 at 19:47 +0200, Michael Walle wrote:
quoted
/**
* of_get_phy_mode - Get phy mode for given device_node
@@ -59,15 +60,39 @@ static int of_get_mac_addr(struct device_node *np,
const char *name, u8 *addr)
static int of_get_mac_addr_nvmem(struct device_node *np, u8 *addr)
{
struct platform_device *pdev = of_find_device_by_node(np);
+ struct nvmem_cell *cell;
+ const void *mac;
+ size_t len;
int ret;
- if (!pdev)
- return -ENODEV;
+ /* Try lookup by device first, there might be a
nvmem_cell_lookup
+ * associated with a given device.
+ */
+ if (pdev) {
+ ret = nvmem_get_mac_address(&pdev->dev, addr);
+ put_device(&pdev->dev);
+ return ret;
+ }
+
This smells like the wrong band aid :)
Any struct device can contain an OF node pointer these days.
But not all nodes might have an associated device, see DSA for example.
I believe what Ben is saying and what I said earlier is going from dev
-> OF node is right and OF node -> dev is wrong. If you only have an
OF node, then use an of_* function.
And as the name suggests of_get_mac_address() operates on a node. So
if a driver calls of_get_mac_address() it should work on the node. What
is wrong IMHO, is that the ethernet drivers where the corresponding
board
has a nvmem_cell_lookup registered is calling of_get_mac_address(node).
It should rather call eth_get_mac_address(dev) in the first place.
One would need to figure out if there is an actual device (with an
assiciated of_node), then call eth_get_mac_address(dev) and if there
isn't a device call of_get_mac_address(node).
Yes, I think we're all in agreement.
But I don't know if that is easy to figure out. Well, one could start
with just the device where nvmem_cell_lookup is used. Then we could
drop the workaround above.
Start with the ones just passing dev.of_node directly:
$ git grep 'of_get_mac_address(.*of_node)'
drivers/net/ethernet/aeroflex/greth.c: addr =
of_get_mac_address(ofdev->dev.of_node);
drivers/net/ethernet/altera/altera_tse_main.c: macaddr =
of_get_mac_address(pdev->dev.of_node);
drivers/net/ethernet/arc/emac_main.c: mac_addr =
of_get_mac_address(dev->of_node);
drivers/net/ethernet/broadcom/bgmac-bcma.c: mac =
of_get_mac_address(bgmac->dev->of_node);
drivers/net/ethernet/cavium/octeon/octeon_mgmt.c: mac =
of_get_mac_address(pdev->dev.of_node);
drivers/net/ethernet/ethoc.c: mac =
of_get_mac_address(pdev->dev.of_node);
drivers/net/ethernet/ezchip/nps_enet.c: mac_addr =
of_get_mac_address(dev->of_node);
drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c: mac_addr =
of_get_mac_address(ofdev->dev.of_node);
drivers/net/ethernet/marvell/pxa168_eth.c: mac_addr =
of_get_mac_address(pdev->dev.of_node);
drivers/net/ethernet/marvell/sky2.c: iap =
of_get_mac_address(hw->pdev->dev.of_node);
drivers/net/ethernet/mediatek/mtk_eth_soc.c: mac_addr =
of_get_mac_address(mac->of_node);
drivers/net/ethernet/microchip/lan743x_main.c: mac_addr =
of_get_mac_address(pdev->dev.of_node);
drivers/net/ethernet/qualcomm/qca_spi.c: mac =
of_get_mac_address(spi->dev.of_node);
drivers/net/ethernet/qualcomm/qca_uart.c: mac =
of_get_mac_address(serdev->dev.of_node);
drivers/net/ethernet/wiznet/w5100-spi.c: const void *mac =
of_get_mac_address(spi->dev.of_node);
drivers/net/ethernet/xilinx/xilinx_axienet_main.c: mac_addr =
of_get_mac_address(pdev->dev.of_node);
drivers/net/ethernet/xilinx/xilinx_emaclite.c: mac_address =
of_get_mac_address(ofdev->dev.of_node);
drivers/net/wireless/ralink/rt2x00/rt2x00dev.c: mac_addr =
of_get_mac_address(rt2x00dev->dev->of_node);
drivers/staging/octeon/ethernet.c: mac =
of_get_mac_address(priv->of_node);
drivers/staging/wfx/main.c: macaddr =
of_get_mac_address(wdev->dev->of_node);
net/ethernet/eth.c: addr = of_get_mac_address(dev->of_node);
Then this will find most of the rest:
git grep -W 'of_get_mac_address([a-z]*)'| grep -E '(node|np)'
Rob