[PATCH net-next] ibmvnic: Increase driver logging

Subsystems: ibm power sriov virtual nic device driver, linux for powerpc (32-bit and 64-bit), networking drivers, the rest

STALE2219d

7 messages, 5 authors, 2020-07-17 · open the first message on its own page

[PATCH net-next] ibmvnic: Increase driver logging

From: Thomas Falcon <hidden>
Date: 2020-07-15 23:53:45

Improve the ibmvnic driver's logging capabilities by providing
more informational messages to track driver operations, facilitating
first-pass debug.

Signed-off-by: Thomas Falcon <redacted>
---
 drivers/net/ethernet/ibm/ibmvnic.c | 76 ++++++++++++++++++++++++------
 1 file changed, 62 insertions(+), 14 deletions(-)
diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index 0fd7eae25fe9..7382f11872fc 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -561,6 +561,7 @@ static int init_rx_pools(struct net_device *netdev)
 	u64 *size_array;
 	int i, j;
 
+	netdev_info(netdev, "Initializing RX queue buffer pools.\n");
 	rxadd_subcrqs =
 		be32_to_cpu(adapter->login_rsp_buf->num_rxadd_subcrqs);
 	size_array = (u64 *)((u8 *)(adapter->login_rsp_buf) +
@@ -618,6 +619,7 @@ static int init_rx_pools(struct net_device *netdev)
 		rx_pool->next_alloc = 0;
 		rx_pool->next_free = 0;
 	}
+	netdev_info(netdev, "RX queue buffer pools allocated successfully.\n");
 
 	return 0;
 }
@@ -738,6 +740,7 @@ static int init_tx_pools(struct net_device *netdev)
 	int tx_subcrqs;
 	int i, rc;
 
+	netdev_info(netdev, "Initializing TX queue buffer pools.\n");
 	tx_subcrqs = be32_to_cpu(adapter->login_rsp_buf->num_txsubm_subcrqs);
 	adapter->tx_pool = kcalloc(tx_subcrqs,
 				   sizeof(struct ibmvnic_tx_pool), GFP_KERNEL);
@@ -768,7 +771,7 @@ static int init_tx_pools(struct net_device *netdev)
 			return rc;
 		}
 	}
-
+	netdev_info(netdev, "TX queue buffer pools allocated successfully.\n");
 	return 0;
 }
 
@@ -792,6 +795,7 @@ static void ibmvnic_napi_disable(struct ibmvnic_adapter *adapter)
 	if (!adapter->napi_enabled)
 		return;
 
+	netdev_info(adapter->netdev, "Disable all NAPI threads.\n");
 	for (i = 0; i < adapter->req_rx_queues; i++) {
 		netdev_dbg(adapter->netdev, "Disabling napi[%d]\n", i);
 		napi_disable(&adapter->napi[i]);
@@ -910,12 +914,14 @@ static int ibmvnic_login(struct net_device *netdev)
 				return -1;
 			}
 		} else if (adapter->init_done_rc) {
-			netdev_warn(netdev, "Adapter login failed\n");
+			netdev_warn(netdev, "Adapter login failed, rc = %d\n",
+				    adapter->init_done_rc);
 			return -1;
 		}
 	} while (retry);
 
 	__ibmvnic_set_mac(netdev, adapter->mac_addr);
+	netdev_info(netdev, "Adapter login success!\n");
 
 	return 0;
 }
@@ -934,6 +940,7 @@ static void release_login_rsp_buffer(struct ibmvnic_adapter *adapter)
 
 static void release_resources(struct ibmvnic_adapter *adapter)
 {
+	netdev_info(adapter->netdev, "Releasing VNIC client device memory structures.\n");
 	release_vpd_data(adapter);
 
 	release_tx_pools(adapter);
@@ -941,6 +948,7 @@ static void release_resources(struct ibmvnic_adapter *adapter)
 
 	release_napi(adapter);
 	release_login_rsp_buffer(adapter);
+	netdev_info(adapter->netdev, "VNIC client device memory released.\n");
 }
 
 static int set_link_state(struct ibmvnic_adapter *adapter, u8 link_state)
@@ -964,7 +972,7 @@ static int set_link_state(struct ibmvnic_adapter *adapter, u8 link_state)
 		reinit_completion(&adapter->init_done);
 		rc = ibmvnic_send_crq(adapter, &crq);
 		if (rc) {
-			netdev_err(netdev, "Failed to set link state\n");
+			netdev_err(netdev, "Failed to set link state, rc = %d\n", rc);
 			return rc;
 		}
 
@@ -1098,6 +1106,8 @@ static int init_resources(struct ibmvnic_adapter *adapter)
 	struct net_device *netdev = adapter->netdev;
 	int rc;
 
+	netdev_info(netdev, "Allocate device resources.\n");
+
 	rc = set_real_num_queues(netdev);
 	if (rc)
 		return rc;
@@ -1126,7 +1136,11 @@ static int init_resources(struct ibmvnic_adapter *adapter)
 		return rc;
 
 	rc = init_tx_pools(netdev);
-	return rc;
+	if (rc)
+		return rc;
+
+	netdev_info(netdev, "Device resources allocated.\n");
+	return 0;
 }
 
 static int __ibmvnic_open(struct net_device *netdev)
@@ -1136,9 +1150,10 @@ static int __ibmvnic_open(struct net_device *netdev)
 	int i, rc;
 
 	adapter->state = VNIC_OPENING;
+	netdev_info(netdev, "Allocating RX buffer pools and enable NAPI structures.\n");
 	replenish_pools(adapter);
 	ibmvnic_napi_enable(adapter);
-
+	netdev_info(netdev, "Activating RX and TX interrupt lines.\n");
 	/* We're ready to receive frames, enable the sub-crq interrupts and
 	 * set the logical link state to up
 	 */
@@ -1155,7 +1170,7 @@ static int __ibmvnic_open(struct net_device *netdev)
 			enable_irq(adapter->tx_scrq[i]->irq);
 		enable_scrq_irq(adapter, adapter->tx_scrq[i]);
 	}
-
+	netdev_info(netdev, "Inform system firmware that device is ready for packet transmission.\n");
 	rc = set_link_state(adapter, IBMVNIC_LOGICAL_LNK_UP);
 	if (rc) {
 		for (i = 0; i < adapter->req_rx_queues; i++)
@@ -1163,7 +1178,7 @@ static int __ibmvnic_open(struct net_device *netdev)
 		release_resources(adapter);
 		return rc;
 	}
-
+	netdev_info(netdev, "Activate net device TX queues.\n");
 	netif_tx_start_all_queues(netdev);
 
 	if (prev_state == VNIC_CLOSED) {
@@ -1180,6 +1195,7 @@ static int ibmvnic_open(struct net_device *netdev)
 	struct ibmvnic_adapter *adapter = netdev_priv(netdev);
 	int rc;
 
+	netdev_info(netdev, "Opening VNIC client device.\n");
 	/* If device failover is pending, just set device state and return.
 	 * Device operation will be handled by reset routine.
 	 */
@@ -1202,7 +1218,7 @@ static int ibmvnic_open(struct net_device *netdev)
 	}
 
 	rc = __ibmvnic_open(netdev);
-
+	netdev_info(netdev, "VNIC client device opened.\n");
 	return rc;
 }
 
@@ -1216,7 +1232,7 @@ static void clean_rx_pools(struct ibmvnic_adapter *adapter)
 
 	if (!adapter->rx_pool)
 		return;
-
+	netdev_info(adapter->netdev, "Freeing all existing RX buffer pool memory.\n");
 	rx_scrqs = adapter->num_active_rx_pools;
 	rx_entries = adapter->req_rx_add_entries_per_subcrq;
 
@@ -1265,7 +1281,7 @@ static void clean_tx_pools(struct ibmvnic_adapter *adapter)
 
 	if (!adapter->tx_pool || !adapter->tso_pool)
 		return;
-
+	netdev_info(adapter->netdev, "Freeing all outstanding TX buffers awaiting completion.\n");
 	tx_scrqs = adapter->num_active_tx_pools;
 
 	/* Free any remaining skbs in the tx buffer pools */
@@ -1282,6 +1298,7 @@ static void ibmvnic_disable_irqs(struct ibmvnic_adapter *adapter)
 	int i;
 
 	if (adapter->tx_scrq) {
+		netdev_info(netdev, "Disabling all TX interrupt lines.\n");
 		for (i = 0; i < adapter->req_tx_queues; i++)
 			if (adapter->tx_scrq[i]->irq) {
 				netdev_dbg(netdev,
@@ -1292,6 +1309,7 @@ static void ibmvnic_disable_irqs(struct ibmvnic_adapter *adapter)
 	}
 
 	if (adapter->rx_scrq) {
+		netdev_info(netdev, "Disabling all RX interrupt lines.\n");
 		for (i = 0; i < adapter->req_rx_queues; i++) {
 			if (adapter->rx_scrq[i]->irq) {
 				netdev_dbg(netdev,
@@ -1307,6 +1325,7 @@ static void ibmvnic_cleanup(struct net_device *netdev)
 {
 	struct ibmvnic_adapter *adapter = netdev_priv(netdev);
 
+	netdev_info(netdev, "Halt net device TX queues.\n");
 	/* ensure that transmissions are stopped if called by do_reset */
 	if (test_bit(0, &adapter->resetting))
 		netif_tx_disable(netdev);
@@ -1326,6 +1345,7 @@ static int __ibmvnic_close(struct net_device *netdev)
 	int rc = 0;
 
 	adapter->state = VNIC_CLOSING;
+	netdev_info(netdev, "Halt incoming packets from system firmware.\n");
 	rc = set_link_state(adapter, IBMVNIC_LOGICAL_LNK_DN);
 	if (rc)
 		return rc;
@@ -1338,6 +1358,7 @@ static int ibmvnic_close(struct net_device *netdev)
 	struct ibmvnic_adapter *adapter = netdev_priv(netdev);
 	int rc;
 
+	netdev_info(netdev, "Stopping VNIC client device.\n");
 	/* If device failover is pending, just set device state and return.
 	 * Device operation will be handled by reset routine.
 	 */
@@ -1348,7 +1369,7 @@ static int ibmvnic_close(struct net_device *netdev)
 
 	rc = __ibmvnic_close(netdev);
 	ibmvnic_cleanup(netdev);
-
+	netdev_info(netdev, "VNIC client device stopped.\n");
 	return rc;
 }
 
@@ -2941,9 +2962,11 @@ static struct ibmvnic_sub_crq_queue *init_sub_crq_queue(struct ibmvnic_adapter
 
 static void release_sub_crqs(struct ibmvnic_adapter *adapter, bool do_h_free)
 {
+	struct net_device *netdev = adapter->netdev;
 	int i;
 
 	if (adapter->tx_scrq) {
+		netdev_info(netdev, "Releasing TX subordinate Command-Response Queues.\n");
 		for (i = 0; i < adapter->num_active_tx_scrqs; i++) {
 			if (!adapter->tx_scrq[i])
 				continue;
@@ -2964,9 +2987,11 @@ static void release_sub_crqs(struct ibmvnic_adapter *adapter, bool do_h_free)
 		kfree(adapter->tx_scrq);
 		adapter->tx_scrq = NULL;
 		adapter->num_active_tx_scrqs = 0;
+		netdev_info(netdev, "TX subordinate Command-Response Queues released.\n");
 	}
 
 	if (adapter->rx_scrq) {
+		netdev_info(netdev, "Releasing RX subordinate Command-Response Queues.\n");
 		for (i = 0; i < adapter->num_active_rx_scrqs; i++) {
 			if (!adapter->rx_scrq[i])
 				continue;
@@ -2987,6 +3012,7 @@ static void release_sub_crqs(struct ibmvnic_adapter *adapter, bool do_h_free)
 		kfree(adapter->rx_scrq);
 		adapter->rx_scrq = NULL;
 		adapter->num_active_rx_scrqs = 0;
+		netdev_info(netdev, "RX subordinate Command-Response Queues released.\n");
 	}
 }
 
@@ -3149,6 +3175,7 @@ static int init_sub_crq_irqs(struct ibmvnic_adapter *adapter)
 	int i = 0, j = 0;
 	int rc = 0;
 
+	netdev_info(adapter->netdev, "Request Subordinate Command-Response Queue interrupts.\n");
 	for (i = 0; i < adapter->req_tx_queues; i++) {
 		netdev_dbg(adapter->netdev, "Initializing tx_scrq[%d] irq\n",
 			   i);
@@ -3195,6 +3222,9 @@ static int init_sub_crq_irqs(struct ibmvnic_adapter *adapter)
 			goto req_rx_irq_failed;
 		}
 	}
+
+	netdev_info(adapter->netdev, "Subordinate Command-Response Queue interrupts created.\n");
+
 	return rc;
 
 req_rx_irq_failed:
@@ -3221,6 +3251,8 @@ static int init_sub_crqs(struct ibmvnic_adapter *adapter)
 	int more = 0;
 	int i;
 
+	netdev_info(adapter->netdev, "Creating Command-Response Queues.\n");
+
 	total_queues = adapter->req_tx_queues + adapter->req_rx_queues;
 
 	allqueues = kcalloc(total_queues, sizeof(*allqueues), GFP_KERNEL);
@@ -3285,6 +3317,8 @@ static int init_sub_crqs(struct ibmvnic_adapter *adapter)
 	}
 
 	kfree(allqueues);
+
+	netdev_info(adapter->netdev, "Command-Response Queue creation complete.\n");
 	return 0;
 
 rx_failed:
@@ -3303,6 +3337,8 @@ static void ibmvnic_send_req_caps(struct ibmvnic_adapter *adapter, int retry)
 	union ibmvnic_crq crq;
 	int max_entries;
 
+	netdev_info(adapter->netdev, "Negotiate device capabilities.\n");
+
 	if (!retry) {
 		/* Sub-CRQ entries are 32 byte long */
 		int entries_page = 4 * PAGE_SIZE / (sizeof(u64) * 4);
@@ -3822,6 +3858,8 @@ static void send_cap_queries(struct ibmvnic_adapter *adapter)
 {
 	union ibmvnic_crq crq;
 
+	netdev_info(adapter->netdev, "Requesting device capabilities.\n");
+
 	atomic_set(&adapter->running_cap_crqs, 0);
 	memset(&crq, 0, sizeof(crq));
 	crq.query_capability.first = IBMVNIC_CRQ_CMD;
@@ -4115,7 +4153,8 @@ static void handle_query_ip_offload_rsp(struct ibmvnic_adapter *adapter)
 		adapter->netdev->features |=
 				tmp & adapter->netdev->wanted_features;
 	}
-
+	netdev_info(adapter->netdev,
+		    "Confirming device offload capabilities.\n");
 	memset(&crq, 0, sizeof(crq));
 	crq.control_ip_offload.first = IBMVNIC_CRQ_CMD;
 	crq.control_ip_offload.cmd = CONTROL_IP_OFFLOAD;
@@ -4263,6 +4302,9 @@ static void handle_request_cap_rsp(union ibmvnic_crq *crq,
 		struct ibmvnic_query_ip_offload_buffer *ip_offload_buf =
 		    &adapter->ip_offload_buf;
 
+		netdev_info(adapter->netdev,
+			    "Query device offload features.\n");
+
 		adapter->wait_capability = false;
 		adapter->ip_offload_tok = dma_map_single(dev, ip_offload_buf,
 							 buf_sz,
@@ -4881,7 +4923,7 @@ static void release_crq_queue(struct ibmvnic_adapter *adapter)
 	if (!crq->msgs)
 		return;
 
-	netdev_dbg(adapter->netdev, "Releasing CRQ\n");
+	netdev_info(adapter->netdev, "Releasing VNIC Command-Response Queue.\n");
 	free_irq(vdev->irq, adapter);
 	tasklet_kill(&adapter->tasklet);
 	do {
@@ -4893,6 +4935,7 @@ static void release_crq_queue(struct ibmvnic_adapter *adapter)
 	free_page((unsigned long)crq->msgs);
 	crq->msgs = NULL;
 	crq->active = false;
+	netdev_info(adapter->netdev, "VNIC Command-Response Queue released.\n");
 }
 
 static int init_crq_queue(struct ibmvnic_adapter *adapter)
@@ -5193,6 +5236,7 @@ static int ibmvnic_remove(struct vio_dev *dev)
 	struct ibmvnic_adapter *adapter = netdev_priv(netdev);
 	unsigned long flags;
 
+	netdev_info(netdev, "Attempting to remove VNIC client device.\n");
 	spin_lock_irqsave(&adapter->state_lock, flags);
 	if (adapter->state == VNIC_RESETTING) {
 		spin_unlock_irqrestore(&adapter->state_lock, flags);
@@ -5206,22 +5250,26 @@ static int ibmvnic_remove(struct vio_dev *dev)
 	flush_delayed_work(&adapter->ibmvnic_delayed_reset);
 
 	rtnl_lock();
+	netdev_info(netdev, "Unregistering net device.\n");
 	unregister_netdevice(netdev);
 
+	netdev_info(netdev, "Releasing VNIC client device resources.\n");
 	release_resources(adapter);
 	release_sub_crqs(adapter, 1);
 	release_crq_queue(adapter);
 
 	release_stats_token(adapter);
 	release_stats_buffers(adapter);
-
+	netdev_info(netdev, "VNIC client device resources released.\n");
 	adapter->state = VNIC_REMOVED;
 
 	rtnl_unlock();
+	netdev_info(netdev, "Freeing net device and VNIC client driver data.\n");
 	mutex_destroy(&adapter->fw_lock);
 	device_remove_file(&dev->dev, &dev_attr_failover);
 	free_netdev(netdev);
 	dev_set_drvdata(&dev->dev, NULL);
+	netdev_info(netdev, "VNIC client device has been successfully removed.\n");
 
 	return 0;
 }
-- 
2.26.2

Re: [PATCH net-next] ibmvnic: Increase driver logging

From: Jakub Kicinski <kuba@kernel.org>
Date: 2020-07-16 00:08:23

On Wed, 15 Jul 2020 18:51:55 -0500 Thomas Falcon wrote:
 	free_netdev(netdev);
 	dev_set_drvdata(&dev->dev, NULL);
+	netdev_info(netdev, "VNIC client device has been successfully removed.\n");
A step too far, perhaps.

In general this patch looks a little questionable IMHO, this amount of
logging output is not commonly seen in drivers. All the the info
messages are just static text, not even carrying any extra information.
In an era of ftrace, and bpftrace, do we really need this?

Re: [PATCH net-next] ibmvnic: Increase driver logging

From: David Miller <davem@davemloft.net>
Date: 2020-07-16 01:32:40

From: Jakub Kicinski <kuba@kernel.org>
Date: Wed, 15 Jul 2020 17:06:32 -0700
On Wed, 15 Jul 2020 18:51:55 -0500 Thomas Falcon wrote:
quoted
 	free_netdev(netdev);
 	dev_set_drvdata(&dev->dev, NULL);
+	netdev_info(netdev, "VNIC client device has been successfully removed.\n");
A step too far, perhaps.

In general this patch looks a little questionable IMHO, this amount of
logging output is not commonly seen in drivers. All the the info
messages are just static text, not even carrying any extra information.
In an era of ftrace, and bpftrace, do we really need this?
Agreed, this is too much.  This is debugging, and thus suitable for tracing
facilities, at best.

Re: [PATCH net-next] ibmvnic: Increase driver logging

From: Thomas Falcon <hidden>
Date: 2020-07-16 16:06:15

On 7/15/20 8:29 PM, David Miller wrote:
From: Jakub Kicinski <kuba@kernel.org>
Date: Wed, 15 Jul 2020 17:06:32 -0700
quoted
On Wed, 15 Jul 2020 18:51:55 -0500 Thomas Falcon wrote:
quoted
  	free_netdev(netdev);
  	dev_set_drvdata(&dev->dev, NULL);
+	netdev_info(netdev, "VNIC client device has been successfully removed.\n");
A step too far, perhaps.

In general this patch looks a little questionable IMHO, this amount of
logging output is not commonly seen in drivers. All the the info
messages are just static text, not even carrying any extra information.
In an era of ftrace, and bpftrace, do we really need this?
Agreed, this is too much.  This is debugging, and thus suitable for tracing
facilities, at best.
Thanks for your feedback. I see now that I was overly aggressive with 
this patch to be sure, but it would help with narrowing down problems at 
a first glance, should they arise. The driver in its current state logs 
very little of what is it doing without the use of additional debugging 
or tracing facilities. Would it be worth it to pursue a less aggressive 
version or would that be dead on arrival? What are acceptable driver 
operations to log at this level?

Thanks,

Tom

Re: [PATCH net-next] ibmvnic: Increase driver logging

From: Michal Suchánek <hidden>
Date: 2020-07-16 16:10:16

On Thu, Jul 16, 2020 at 10:59:58AM -0500, Thomas Falcon wrote:
On 7/15/20 8:29 PM, David Miller wrote:
quoted
From: Jakub Kicinski <kuba@kernel.org>
Date: Wed, 15 Jul 2020 17:06:32 -0700
quoted
On Wed, 15 Jul 2020 18:51:55 -0500 Thomas Falcon wrote:
quoted
  	free_netdev(netdev);
  	dev_set_drvdata(&dev->dev, NULL);
+	netdev_info(netdev, "VNIC client device has been successfully removed.\n");
A step too far, perhaps.

In general this patch looks a little questionable IMHO, this amount of
logging output is not commonly seen in drivers. All the the info
messages are just static text, not even carrying any extra information.
In an era of ftrace, and bpftrace, do we really need this?
Agreed, this is too much.  This is debugging, and thus suitable for tracing
facilities, at best.
Thanks for your feedback. I see now that I was overly aggressive with this
patch to be sure, but it would help with narrowing down problems at a first
glance, should they arise. The driver in its current state logs very little
of what is it doing without the use of additional debugging or tracing
facilities. Would it be worth it to pursue a less aggressive version or
would that be dead on arrival? What are acceptable driver operations to log
at this level?
Also would it be advisable to add the messages as pr_dbg to be enabled on demand?

Thanks

Michal

Re: [PATCH net-next] ibmvnic: Increase driver logging

From: Jakub Kicinski <kuba@kernel.org>
Date: 2020-07-16 20:24:12

On Thu, 16 Jul 2020 18:07:37 +0200 Michal Suchánek wrote:
On Thu, Jul 16, 2020 at 10:59:58AM -0500, Thomas Falcon wrote:
quoted
On 7/15/20 8:29 PM, David Miller wrote:  
quoted
From: Jakub Kicinski <kuba@kernel.org>
Date: Wed, 15 Jul 2020 17:06:32 -0700
  
quoted
On Wed, 15 Jul 2020 18:51:55 -0500 Thomas Falcon wrote:  
quoted
  	free_netdev(netdev);
  	dev_set_drvdata(&dev->dev, NULL);
+	netdev_info(netdev, "VNIC client device has been successfully removed.\n");  
A step too far, perhaps.

In general this patch looks a little questionable IMHO, this amount of
logging output is not commonly seen in drivers. All the the info
messages are just static text, not even carrying any extra information.
In an era of ftrace, and bpftrace, do we really need this?  
Agreed, this is too much.  This is debugging, and thus suitable for tracing
facilities, at best.  
Thanks for your feedback. I see now that I was overly aggressive with this
patch to be sure, but it would help with narrowing down problems at a first
glance, should they arise. The driver in its current state logs very little
of what is it doing without the use of additional debugging or tracing
facilities. Would it be worth it to pursue a less aggressive version or
would that be dead on arrival? What are acceptable driver operations to log
at this level?  
Sadly it's much more of an art than hard science. Most networking
drivers will print identifying information when they probe the device
and then only about major config changes or when link comes up or goes
down. And obviously when anything unexpected, like an error happens,
that's key.

You seem to be adding start / end information for each driver init /
deinit stage. I'd say try to focus on the actual errors you're trying
to catch.
Also would it be advisable to add the messages as pr_dbg to be enabled on demand?
I personally have had a pretty poor experience with pr_debug() because
CONFIG_DYNAMIC_DEBUG is not always enabled. Since you're just printing
static text there shouldn't be much difference between pr_debug and
ftrace and/or bpftrace, honestly.

Again, slightly hard to advise not knowing what you're trying to catch.

Re: [PATCH net-next] ibmvnic: Increase driver logging

From: Stephen Hemminger <stephen@networkplumber.org>
Date: 2020-07-17 00:28:32

On Thu, 16 Jul 2020 13:22:00 -0700
Jakub Kicinski [off-list ref] wrote:
On Thu, 16 Jul 2020 18:07:37 +0200 Michal Suchánek wrote:
quoted
On Thu, Jul 16, 2020 at 10:59:58AM -0500, Thomas Falcon wrote:  
quoted
On 7/15/20 8:29 PM, David Miller wrote:    
quoted
From: Jakub Kicinski <kuba@kernel.org>
Date: Wed, 15 Jul 2020 17:06:32 -0700
    
quoted
On Wed, 15 Jul 2020 18:51:55 -0500 Thomas Falcon wrote:    
quoted
  	free_netdev(netdev);
  	dev_set_drvdata(&dev->dev, NULL);
+	netdev_info(netdev, "VNIC client device has been successfully removed.\n");    
A step too far, perhaps.

In general this patch looks a little questionable IMHO, this amount of
logging output is not commonly seen in drivers. All the the info
messages are just static text, not even carrying any extra information.
In an era of ftrace, and bpftrace, do we really need this?    
Agreed, this is too much.  This is debugging, and thus suitable for tracing
facilities, at best.    
Thanks for your feedback. I see now that I was overly aggressive with this
patch to be sure, but it would help with narrowing down problems at a first
glance, should they arise. The driver in its current state logs very little
of what is it doing without the use of additional debugging or tracing
facilities. Would it be worth it to pursue a less aggressive version or
would that be dead on arrival? What are acceptable driver operations to log
at this level?    
Sadly it's much more of an art than hard science. Most networking
drivers will print identifying information when they probe the device
and then only about major config changes or when link comes up or goes
down. And obviously when anything unexpected, like an error happens,
that's key.

You seem to be adding start / end information for each driver init /
deinit stage. I'd say try to focus on the actual errors you're trying
to catch.
quoted
Also would it be advisable to add the messages as pr_dbg to be enabled on demand?  
I personally have had a pretty poor experience with pr_debug() because
CONFIG_DYNAMIC_DEBUG is not always enabled. Since you're just printing
static text there shouldn't be much difference between pr_debug and
ftrace and/or bpftrace, honestly.

Again, slightly hard to advise not knowing what you're trying to catch.
Linux drivers in general are far too noisy.
In production it is not uncommon to set kernel to suppress all info messages.
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help